Oil and Gas

Course catalogue

hits
531
Course code: MUK-026
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it cake reduce the likelihood of accidents in the workplace.

 

Course Content
- Explain the principles of, and steps involved in, the Risk Assessment process
- Explain that employers have a responsibility for completing Risk Assessments and that employees have a duty to follow Risk Assessment outcomes
- Identify a typical Risk Assessment form
- Explain the requirements of the Risk Assessment team
- Recognise and explain Risk Assessment terminology
- Identify the different steps within the Risk Assessment process
- Identify common, industry-specific hazards
- Determine the appropriate level of Risk Assessment that may be required
- Explain how to use a Risk Matrix to evaluate the level of risk
- Explain how to identify appropriate control measures based on the Hierarchy of Control
- Explain what is meant by ‘Initial Risk’ and ‘Residual Risk’
- Describe what to do if any Residual Risk remains too high
- Explain how to carry out a Personal Risk Assessment and recognise its importance before each task
- Explain the importance of Dynamic Risk Assessment
- Identify situations where ‘Stopping the Job’ may apply
- Explain the importance of communicating the outcomes of a Risk Assessment
- Understand the importance of communicating ‘Lessons Learned’
Course code: NI-010
Course type: E-learning course
Duration: 5 hours
Language: Norwegian / English
Price: NOK 1800,-

The Working Environment Act, section 3-5, obligates employers and executives to complete HSE training. This course satisfies the requirements for HSE training for executives and managers.

The course contains the following modules: 

• A working life changing

• The Working Environment Act

• Risk Managament

• Healthy enough to work?

• Systematic HSE work

 

Course code: PRO-026
Course type: E-learning course
Duration: 4-6 hours
Language: Norwegian
Price: NOK 5000,-

For English version of this course, please enrol to "Enterprise Risk Management (English version)".

Enterprise risk management is about working with what is important to your business, ie setting the right priorities in a time of great challenges and limited resources. The purpose of ERM is to ensure the right balance between developing and creating value and to prevent accidents, injuries and losses.

After completing the course, participants will have a greater understanding of risk management and how a company can implement this in their business.

 

Course content

Topics that will be covered in this course:

* Risk management - conceptual clarification

* Why risk

* How to structure risk management in business

* How to implement risk management process

* How to establish management structures, roles and responsibilities

* What support systems can support risk management

* How to develop a culture that supports enterprise risk

* How to learn, evaluate and improve enterprise risk

 

The course can be taken as a pure e-learning courses or combined with a final classroom collection (recommended). The course will be implemented as "Blended Learning" and is divided into two main parts:

The theoretical implemented as individual e-learning. Part two of the course undertaken as a classroom session where the central theoretical topics discussed, and where participants work with case studies.

Course code: MTP-027
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian
Price: NOK 750,-

The employer holds the responsibility for creating a good work environment, but this also requires significant contribution by the employees.

The course “Office Ergonomics” provides common knowledge and skills regarding ergonomics to employer and employee. With a common understanding, systematic work on identifying and solving work environment issues can begin.

 

Course Content

- Introduction 

- General ergonomics 

- Office ergonomics

Course code: SCT-001
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian
Price: NOK 1500,-

This operating and safety course gives all users adequate training to use high-pressure wash down equipment. The course is based on ”Regulation 515, High-pressure washing etc.” from the Norwegian Labour Inspection Authority. You will learn how to reduce injuries and damage to equipment.

Builds on "Regulations for water jetting, etc." from The Norwegian Labour Inspection Authority.

 

Course Content 

- Personal protective equipment

- Injuries/damages

- Use of equipment

- System description

 

Course code: MUK-102
Course type: E-learning course
Duration: 50 minutes
Language: English
Price: NOK 500,-

Course goal: This course aims to increase learners’ awareness of the environmental aspects and impacts related to the Oil and Gas Industry and the actions that can be taken to minimise environmental damage

 

Target Audience: All personnel

 

Learning Objectives

LO1 Identify the main environmental issues that affect the Oil and Gas industry, both on and offshore

LO2 Explain the importance of being an environmentally responsible company

LO3 Explain the company’s commitment to managing environmental issues

LO4 Explain the role of ISO 14001 in environmental management

LO5 Explain the role of the Department of Energy and Climate Change (DECC)

LO5a Explain the role of the Scottish Environment Protection Agency (SEPA) and the Environment Agency (EA)

LO6 Define what is meant by environmental ‘aspects’ and ‘impacts’

LO7 Identify the activities that can contribute towards atmospheric pollution

LO8 Identify the activities that can contribute towards water pollution

LO9 Identify typical spill sources

LO10 Describe the environmental effects of chemical discharges

LO11 Identify the sources and impacts of disturbance of the seabed by the Oil and Gas Industry

LO12 Identify the sources and impacts of noise from oil and gas operations

LO13 Identify the activities that can generate waste

LO14 Describe ways in which the impact on the environment can be minimised

LO15 Explain that everyone has a role to play in protecting the environment

Course code: MTP-043
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 650,-

FSE Offshore - Low Voltage is a FSE course targeting personell working offshore with low voltage installations. The course focuses on FSE offshore and meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-043-FT.

 

Course code: PRO-015
Course type: E-learning course
Duration: 10-15 hours
Language: Norwegian
Price: NOK 4000,-

This course provides a solid theoretical foundation within the HSE. But the focus is always how work safety, health and the environment are planned and carried out in practice.

 

After completing the module, participants will be better able to understand the safety significance of work for society, business and individuals. At the same time the motivation to work with HSE to be strengthened. This is done through learning and reflection on important topics such as:

- HSE concepts

- Key principles of management and HSE

- Measures and models for HSE

 

Course content

- Introduction to Safety Management - Regulation of health, safety and security

- Internal control and management philosophy - Duties and rights

- HSE management - vision, strategy and goals

- Culture - Behaviour

- Health and environment - Environmental

- Safety - The risk management process and risk analysis

- Preparedness - Monitoring of adverse events

Course code: MTP-006
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 1350,-

Health, Safety and Environment (HSE) considerations are vital to every enterprise. Moreover, HSE requirements in the workplace are laid down in a whole range of laws, regulations and guidelines. The employer has the primary responsibility for providing a suitable, safe working environment – and for ensuring sufficient training. This “HSE Introduction” provides you with the basic knowledge you need to know to be able to deal with HSE challenges in your daily work.

Content:

Introduction to HSE - duration ca. 35 minutes.
Health - duration ca.  55 minutes.
Environment - duration ca. 15 minutes.
Safety - duration ca. 25 minutes.

The modules may be completed in any order. If you close the course window, it will reopen on the same page next time. After completing all the modules, you must pass the final test to have your course completion approved.

Course code: MUK-018
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

Course Content
-Explain what is meant by the term ‘Abrasive Wheel’
-Explain the legislative requirements for abrasive wheels
-Give examples of different types of abrasive wheels
-Explain how abrasive wheels operate
-Explain the importance of using guards during grinding operations
-Explain the requirements for portable and hand-held grinding machines
-Explain the main hazards of grinding operations
-Give examples of common problems faced when using abrasive wheels
-Explain what the PPE requirements are during grinding operations
-Identify the safety measures that must be in place during grinding operations

Course code: MUK-037
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English
Price: NOK 1000,-

Course Goal: This course aims to provide learners with an introduction to the principles of the systems associated with oil and gas processing operations.

Target Audience: All relevant personnel

Course Overview

(Course Navigation and Welcome screens)

Section 1: An Introduction to Oil Treatment

LO1 Explain the theory behind the process of separation in the Oil and Gas Industry

LO2 Identify the most common types of separator

LO3 Identify the requirements for a test separator and explain how they are used to monitor individual well production

LO4 Give an overview of main oil line pumps and explain how they are deployed

Section 2: An Introduction to Gas Compression and Hydrate Prevention

LO5 Give an overview of the process of gas compression

LO6 Describe the different methods of chemical injection used for hydrate prevention (during gas export)

Section 3: An Introduction to Utility Systems

LO7 Identify the different utility systems in use in the Oil and Gas Industry

LO8 Describe the use of sea water lift pumps and water polishing systems

LO9 Describe the purpose of cooling systems and heat exchangers

LO10 Describe the use of heat medium systems

LO11 Describe the use of potable water systems

LO12 Describe the use of diesel storage systems for the bunkering, storage and distribution of diesel

Course code: PRO-016
Course type: E-learning course
Duration: 4-6 hours
Language: Norwegian
Price: NOK 4500,-

For the english version of this course please enrol to the course "Basic Risk Analysis".

Risk has always been an important part of our lives. People have always tried to get an overview of what risks are linked to different activities. Nowadays, risk management is a core concept in many different contexts – for example, we talk about a business risk or a risk of injury or loss of life.

In this course, the main focus is on what we usually call risk-based HSE management, but the course also throws light on principles and methods which can be used generally for risk management in business.
There are many guides and standards concerning how a risk analysis may be performed, and many of these are adapted to specific industries and specialized areas. This course offers a general approach to the risk management process, without a pronounced sector-based content.

Following completion of the module, participants will have a better understanding of what risk management is and be familiar with the various phases of the risk management process. At the same time, the participants will come to understand why risk forms a core part of all human activity. This will be done by means of learning and reflection on such key topics as: 

• Basic principles of risk-based management
• What is risk?
• How to include risk management in the other activities of the business

 

Course content 
• Introduction to risk management
• The risk management process
• Risk analysis
• Risk analysis methods
• Acceptance and decision criteria
• Risk identification
• Frequency
• Impact assessments
• Risk assessment and outcome
• Cost-benefit assessments
• Measures and follow-up
• Management – drilling and well operations
• Management – emergency preparedness
• Management – health and working environment
• Management – external environment

The course can also be offered in combination with a classroom session. Contact us for a tailormade solution for your company.

Course code: MTP-041
Course type: E-learning course
Duration: 2 hours 30 minutes
Language: English, Norwegian
Price: NOK 1150,-

FSE Offshore Low and High Voltage is a FSE course targeting personell working offshore with low and high voltage installations. The course focuses on FSE offshore and meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

 

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-041-FT.

Course code: MTP-055
Course type: E-learning course
Duration: 45 minutes
Language: Norwegian and english
Price: NOK 500,-

The course covers the government requirements on theoretical training for personnel who may undertake simple operational and maintenance tasks on the electrical system.

The course focuses on preventing accidents and to be aware of the dangers of working with electricity. 

The theoretical part of First Aid and instructions are covered, but it is necessary to undertake practical training both in First Aid and the work tasks covered by the instructions in relation to the electrical installation where you are to work.

Course code: MUK-006P
Course type: E-learning course
Duration: 30 minutes
Language: Brazilian Portuguese
Price: NOK 500,-

The course aims to increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practice for the correct handling techniques for safe lifting, and for the pushing and pulling of loads.

 

Kursinnhold

- Define the term ‘manual handling’ and explain the importance of safe manual handling operations
- Identify the types of injuries that may result from manual handling operations
- Identify the legislation that is in place to regulate manual handling operations
- Describe the duties that are placed on employers and employees by the Manual Handling Operations
Regulations
- Explain the importance of risk assessing manual handling operations
- Identify the factors to consider when assessing manual handling operations
- Describe good handling techniques for safe lifting and the importance of working within the HSE manual
handling risk assessment
- Describe good handling techniques for pushing and pulling loads
- Explain the training requirements associated with manual handling operations

Course code: KYS-001
Course type: E-learning course
Duration: 3-5 hours
Language: Norwegian
Price: NOK 6900,-

The course provides employees who are responsible for drinking water offshore, or tasks associated with this, increased knowledge and understanding to provide good, sufficient and safe drinking water to the staff on board.

Satisfy the requirements for competence in relation to the Norwegian Public Health Institute’s guidelines: “Nok, godt og sikkert drikkevann offshore.”

After the course you should:
- Know about and be able to orient yourself in the relevant regulations with emphasis on the public health department's supervisor “Nok, godt og sikkert drikkevann offshore"
- Understand the distinction between drinking water affect the installation's water system, and people's health
- Understand the purpose of the various laboratory analyzes used to monitor the quality of water
- Know which analyzes offshore employees are responsible for themselves, and what responsibilities they have in connection with the analyzes that must be sent to an accredited laboratory
- Be able to interpret results from laboratory analyzes and know what action offshore staff must implement when results are abnormal and/or critical
- Understand the structure of a drinking water system offshore, and where in the system offshore personnel has responsibility for operation and maintenance

Please note: this course is also available in an English-language version. 

Course code: MUK-086
Course type: E-learning course
Duration: 3 hours
Language: English
Price: NOK 1500,-

This course has seven modules:

Module 1: Introduction to Gas Compression

Module 2: Gas Compression Systems

Module 3: Gas Compressors and their Principles

Module 4: Gas Compressors and their Components

Module 5: Gas Compression Systems: Controlling Surge

Module 6: Gas Compression Systems: Start-up and Shutdown

Module 7: Gas Compression Systems: Innovation

Course code: PRO-007
Course type: E-learning course
Duration: 3-5 hours
Language: Norwegian
Price: NOK 3300,-

This course will provide a basic introduction to important issues related to the external environment and the petroleum industry. It includes the conditions regarding the environment (sea and the life there) and how the activities affect the environment.  Environmental management is a tool to use to reduce companies' negative impact on the environment.


After completing the module the participants will understand what environmental management involves and have general knowledge of what is included in this. Participants will also learn about how environmental management is carried out in practice in the offshore industry.This is done through learning and reflection on important topics.

 

Course Content

• Environmental Accounting
• Principles for the calculation of emissions to air and sea
• Sources of information
• About the resipient
• What are the processes and mass balance of a facility
• Emissions to air
• Discharges to sea
• Waste and waste handling
• Environmental account
• Legislation related to environmental management

Course code: MTP-050
Course type: E-learning course
Duration: 2 hours 30 minutes
Language: Norwegian / English
Price: NOK 1150,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-050-FT.

Course code: PRO-009
Course type: Blended course
Duration: 10-15 hours e-learn ...
Language: English
Price: From NOK 7900,-

Course meets AML § 6-5 on requirements for trainig safety delegates and AMU-members

This course provides a solid theoretical foundation within the HSE. But the focus is always how work safety, health and the environment are planned and carried out in practice.

 

After completing the module, participants will be better able to understand the safety significance of work for society, business and individuals. At the same time the motivation to work with HSE to be strengthened. This is done through learning and reflection on important topics such as:

- HSE concepts
- Key principles of management and HSE
- Measures and models for HSE

 

Course content
- Introduction to Safety Management - Regulation of health, safety and security
- Internal control and management philosophy - Duties and rights
- HSE management - vision, strategy and goals
- Culture - Behaviour
- Health and environment - Environmental
- Safety - The risk management process and risk analysis
- Preparedness - Monitoring of adverse events

Hits per page
| 4 ... |