Oil and Gas

Course catalogue

hits
647
Course code: MUK-121
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English
Price: NOK 1000,-

Course Goal: This course aims toprovide learners with an introduction to major accident hazards

 

Target Audience: All relevant personnel

 

Learning Objectives

LO1 Explain what is meant by a Major Accident Hazard

LO2 Describe the difference between occupational hazards and Major Accident Hazards

LO3 Give examples of major accidents and recognise why and how they occurred

LO4 Describe how barrier models are used to identify and mitigate risk

LO5 Give examples of systems which can help prevent Major Accident Hazards

LO6 Explain what is meant by a Safety Critical Element

LO7 Explain the importance of Safety Critical Maintenance

LO8 Explain what is meant by a Safety Critical Task

LO9 Explain how human factors relate to Major Accident Hazards

Course code: MUK-064
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Course Goal: This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

Target Audience: All relevant personnel

Learning Objectives

LO1 Define compressed air
LO2 Identify common uses of compressed air
LO3 Give examples of the risks associated with the use of compressed air
LO4 Identify the different types and sizes of compressors
LO5 Explain how a typical air compressor operates
LO6 Identify the need for controlling compressed air quality through cooling, drying and filtration
LO7 Identify the different types of protection systems that may be in place

Course code: MUK-110
Course type: E-learning course
Duration: 1 hour
Language: English
Price: NOK 1000,-

Course Goal: This course aims to provide learners with an overview of industry best practice in relation to accident and incident investigation

 

Target Audience: All relevant personnel

 

Learning Objectives:

 

LO01 Define what is meant by the terms ‘accident’ and ‘incident’

LO02 Explain the importance of accident and incident investigation

LO03 Explain the purpose of, and reasons for, investigating accidents and incidents

LO04 Give an overview of accident and incident notification and reporting requirements

LO05 Outline the key roles and responsibilities involved in investigating and reporting an accident or incident

LO06 Explain how to determine the appropriate level of investigation using an incident severity risk assessment

LO07 Identify the key steps involved in a typical accident and incident investigation process

LO08 Describe typical information gathering requirements

LO09 Describe the requirement for analysis of the causes of the accident or incident

LO10 Describe Root Cause Analysis (RCA)

LO11 Explain the significance of human factors in contributing to accidents and incidents

LO12 Describe how to identify suitable risk control measures

LO13 Describe the requirement for an accident or incident action plan and its implementation using SMART principles

Course code: MUK-223
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Course Goal: This course aims to provide an awareness of how to operate a forklift truck in a safe and proper manner.

Course Level: Awareness

 

Learning Objectives:

 

LO1 Identify the regulatory requirements for forklift trucks

LO2 Give an overview of the differences between a forklift truck and a car

LO3 Explain the training requirements for forklift operators

LO4 Give an overview of the different categories of forklift trucks

LO5 Identify the typical components of a forklift truck

LO6 Identify the information provided on a forklift’s nameplate

LO7 Define what is mean by the terms ‘maximum load capacity’ and ‘rated load center’

LO8 Describe how to calculate the load capacity of a forklift truck

LO9 Explain the basic principles of how a forklift truck works

LO10 Describe the ‘stability triangle’

LO11 Identify common factors that can contribute to tip-over incidents

LO12 Explain what actions to take in the event of a tip-over

LO13 Describe OSHA’s requirements for the inspection of forklift trucks

LO14 Give an overview of best practice in relation to the safe operation of forklift trucks

LO15 Give an overview of refueling and recharging requirements

LO16 Give an overview of how forklift attachments can affect load capacity and safe operation

 

Course code: MUK-016
Course type: E-learning course
Duration: 4 hours
Language: English
Price: NOK 1500,-
IMPORTANT INFORMATION
 
OPITO Approved Certification for this eLearning course is ONLY issued when this course is undertaken in an OPITO approved training centre.
 
To book your course in our approved eLearning facility please contact our sales team who will be happy to assist.
 

Phone:  +44 (0)1224 651340  E-mail:   Sales-UK@mintragroup.com

 

Please Note: There is a separate charge from OPITO of £25 for the issue of a certificate upon course completion of each Level.
 

Course goal: This OPITO and IOSH-approved course aims to provide the knowledge and techniques for carrying out gas testing.

 

Course Content
Section 1: Introduction
Section 2: Hazards Associated with Gases and Vapours
Section 3: Flammable Atmospheres
Section 4: Fire and Explosions
Section 5: Toxic Atmospheres
Section 6: Oxygen Deficiency and Oxygen Enrichment
Section 7: The Hazards of Confined Spaces
Section 8: The Gas Monitor
Section 9: Using Gas Testing Equipment when Carrying out Fire Watch Duties
Section 10: Using the Gas Testing Equipment to Clear an Area Prior to Hot Work
Section 11: Using the Gas Testing Equipment to Identify a Potential Gas Leak
Section 12: Using the Gas Testing Equipment to Test the Atmosphere of a Confined Space Prior to Entry
Section 13: Using the Gas Testing Equipment during Purging Operations
Section 14: Final Assessment
 
Course code: MUK-088
Course type: E-learning course
Duration: 3 hours
Language: English
Price: NOK 1500,-

This course contains seven modules:

 

Module 1: Introduction to Metering

 

Module 2: Gas Metering Principles of Flow Measurement

 

Module 3: Gas Metering

 

Module 4: Oil Metering

 

Module 5: Metering Operations

 

Module 6: Sampling Systems

 

Module 7: Pigging

Course code: MTP-005
Course type: E-learning course
Duration: 1 hour
Language: Norwegian
Price: NOK 1550,-

The objective of the e-learning course is to give the target group a fundamental understanding of the construction of the most common valve types and sealing as well as operational considerations.

 

3D-visualisations are employed to illustrate construction, sealing and operation.

 

Course Content

- A tool for increasing, verifying and reinforcing competence 

- Workshops and Safe Job Analysis 

- Planned shutdown and leak-free start-up 

- A Job-support tool 

- Optimization of installations

Course code: MUK-093
Course type: E-learning course
Duration: 3 hours
Language: English
Price: NOK 1500,-

This course contains ten modules:

 

Module 1: The Purpose of Separation

 

Module 2: Reservoir Fluids

 

Module 3: The Principles of Separation

 

Module 4: Separator Types

 

Module 5: Separator Construction

 

Module 6: Multi-stage Separation

 

Module 7: Separator Control

 

Module 8: Separator Operation

 

Module 9: Problems Associated with Separators

 

Module 10: New Separation Technology

Course code: APP-012
Course type: E-learning course
Duration: 1 hour
Language: Norwegian
Price: NOK 990,-

“Course on fall protection” is a course on the basics of fall protection for anyone working above ground.

This course outlines the laws and regulations related to fall protection. It contains information about active as well as passive protection gear, as well as first aid related to falls from a height. Upon completion of the course one will have information about the various aspects of fall protection. One will also learn how to carry out ones work in a safe and secure manner within the confines of the applicable laws and regulations.

 

Course Content

- Laws and regulations

- Active and passive fall protection

- First aid

Course code: MUK-210-FT
Course type: E-learning course
Duration: 35 minutes
Language: English
Price: NOK 500,-

Course Goal: This course provides learners with an awareness of the hazards involved in working at height and gives an overview of the OSHA requirements in relation to working at height and fall protection

 

Learning Objectives:

 

LO1 Identify when fall protection is required

LO2 Identify the legislative and regulatory requirements for fall protection that help to control work at height

LO3 Explain the duties that are placed on employers and employees

LO4 Describe the hazards involved in working at height

LO5 Explain the importance of planning and risk assessment

LO6 Describe the hierarchy of control for managing and selecting fall protection equipment 

LO7 Identify the factors that should be considered when assessing fall protection methods

LO8 Describe the main methods of access for working at height and give examples of the different types of fall protection equipment

LO9 Describe the rules for working with ladders

LO10 Describe the rules for working with scaffolds

LO11 Explain the importance of inspecting equipment

LO12 Explain how to correctly use a safety harness

Course code: MUK-092
Course type: E-learning course
Duration: 2 hours 30 minutes
Language: English
Price: NOK 1500,-

Course Goal: This course is designed to enable all personnel to have a common and consistent approach to both company and industry best practice in relation to managing produced water.

 

This course contains 7 sections:

 

Section 1: Introduction to the Oilfield Water Cycle

Section 2: Production Streams and Disposal Management

Section 3: Produced Water Discharges - Environmental and Regulatory Requirements

Section 4: Produced Water Treatment Principles

Section 5: Produced Water Treatment Equipment

Section 6: Produced Water Chemical Management

Section 7: Oilfield Water Cycle Summary 

 

Course code: MUK-013
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

This course aims to give offshore personnel a greater understanding of the hazards associated with packaging and cargo handling and the movement of cargo to, and from, offshore installations.

 

Course Content
-Explain the responsibilities and duties of all personnel and their duties under current legislation
-Explain the importance of checking for dropped objects and identify the areas that should be monitored
-Explain the key areas of safe lifting and slinging operations
-Explain the key principal points to be considered when preparing cargo for shipment to and from offshore
locations
-Describe the procedures involved for shipping freight by air
-Define what is classified as ‘Dangerous Goods by Sea’ and the main considerations for shipping
-Define what is classified as ‘Dangerous Goods by Air’ and the main considerations for shipping
-Explain the principal requirements for waste management
-Identify examples of bad practice

Course code: MUK-054
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

The course aims to increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practice for the correct handling techniques for safe lifting, and for the pushing and pulling of loads.

 

Course Content

-Define the term ‘manual handling’ and explain the importance of safe manual handling operations

-Identify the types of injuries that may result from manual handling operations

-Recognise the requirement to regulate manual handling operations

-Describe the duties that are placed on employers and employees

-Explain the importance of risk assessing manual handling operations

-Identify the factors to consider when assessing manual handling operations and identify ways of reducing the risks of injury

-Describe good handling techniques for safe lifting

-Describe good handling techniques for pushing and pulling loads

-Explain the training requirements associated with manual handling operations

Course code: MUK-007N
Course type: E-learning course
Duration: 45 minutes
Language: Norwegian
Price: NOK 500,-

This course aims to increase learners’ awareness of the risks of hand-arm vibration and the effects that it can cause. The course also looks at the control measures that should be taken to reduce exposure to vibration, based on industry best practice.

 

This course is designed to enable you to:

- Describe hand-arm vibration and the effects it can cause
- Explain the duties of employers, employees and equipment manufacturers in reducing exposure to vibration
- Describe the process of assessing the risk of exposure to vibration
- Outline the control measures that should be taken to reduce exposure to vibration

 

Course code: DP-2000
Course type: E-learning course
Duration: 7 hours
Language: Norwegian
Price: NOK 450,-

Only in Norwegian

Kurset gir en praktisk opplæring i Excel 2010. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye "smarte" funksjonene. Kurset inneholder over 50 ulike opplæringsvideoer.
Backstage-visning inneholder alle filrelaterte funksjoner. Autofyll forenkler arbeidet med å fylle inn data. Formler og funksjoner utfører beregninger raskt. Med betinget formatering kan du følge sentrale verdier i regnearket. Cellestiler gjør formateringen mer konsekvent. Diagram gir en visuell framstilling av tallverdier. Sparkline-grafikk kan brukes for å visualisere data direkte i regnearkceller. Nytt integrert utskriftsmiljø med både utskriftsinnstillinger og forhåndsvisning.

 

Kursinnhold

- Bli kjent med Excel 

- Redigering 

- Formler

- Formatering 

- Funksjoner 

- Diagram 

- Flere regneark 

- Lister og tabeller 

- Utskrift

Course code: MUK-137
Course type: E-learning course
Duration: 45 minutes
Language: English, Norwegian
Price: NOK 500,-

Course goal: This course aims to increase learners’ awareness of the environmental aspects and impacts related to the Oil and Gas Industry and the actions that can be taken to minimise environmental damage.

 

Learning Objectives

LO1 Identify the main environmental issues that affect the Oil and Gas industry

LO2 Explain the importance of being an environmentally responsible company

LO3 Explain the company’s commitment to managing environmental issues

LO4 Explain the role of ISO 14001 in environmental management

LO5 Explain the role of the Regulator

LO6 Define what is meant by environmental ‘aspects’ and ‘impacts’

LO7 Identify the activities that can contribute towards atmospheric pollution 

LO8 Identify the activities that can contribute towards water pollution

LO9 Identify typical spill sources

LO10 Describe the environmental effects of chemical discharges

LO11Identify the sources and impacts of disturbance of the seabed by the Oil and Gas Industry 

LO12 Identify the sources and impacts of noise from oil and gas operations 

LO13 Identify the activities that can generate waste

LO14 Describe ways in which the impact on the environment can be minimised

 

LO15 Explain that everyone has a role to play in protecting the environment

Course code: MTP-005
Course type: E-learning course
Duration: 1 hour
Language: English
Price: NOK 1550,-

The objective of the e-learning course is to give the target group a fundamental understanding of the construction of the most common valve types and sealing as well as operational considerations.

 

3D-visualisations are employed to illustrate construction, sealing and operation.

 

Course Content

- A tool for increasing, verifying and reinforcing competence 

- Workshops and Safe Job Analysis 

- Planned shutdown and leak-free start-up 

- A Job-support tool 

- Optimization of installations

Course code: MTP-059
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian
Price: NOK 500,-

The course will make you aware of aspects relating to anti-corruption and anti-bribery and will familiarize you with the relevant legislation. During the course you will encounter common dilemmas where you will be asked to make your own decisions. The feedback in the exercises will enable you to handle various questions and tricky situations.

Course code: MUK-087
Course type: E-learning course
Duration: 2 hours 30 minutes
Language: English
Price: NOK 1500,-

This course contains seven modules:

Module 1: Introduction to Gas Treatment

Module 2: Problems Associated with Water in Gas Streams

Module 3: Liquid Desiccant Dehydration

Module 4: Solid Desiccant Dehydration

Module 5: Alternative Gas Dehydration Processes

Module 6: Acid Gas Removal Unit

Module 7: Removal of Other Impurities in Raw Gas Streams

Course code: MGM-007
Course type: E-learning course
Duration: 40 minutes
Language: English
Price: NOK 600,-

Course Goal: This course aims to provide learners with an introduction to cyber-security and cyber-risks, and how by improving personal awareness of cyber-risks can improve cyber-security overall.

 

Learning Objectives:

- Describe the term cyber-security and recognise how cyber-security starts with “you”

- Explain the threat of cyber-crime and the possible outcomes of an attack

- Describe cyber-security laws and regulations

- Describe possible cyber-threats

- Describe best practices to reduce cyber-risk

Hits per page
| 1 6 ... |