Oil and Gas

Course catalogue

Category

Course type

Course provider

hits
832
Course code: NOG-088/090
Course type: E-learning course
Duration: 1 hour
Language: English, Norwegian
Price: NOK 165,-

WP & SJA provides a basic introduction for all personnel working offshore on the Norwegian continental shelf. The course consists of two main parts,  WP; Work Permit and SJA; Safe Job Analysis.

The course has been developed using the Norwegian Oil Industry Association's (Norwegian oil and gas) guidelines 088 and 090.

Price for company members of the Norwegian Oil and Gas Association: NOK 80,-


Course Content
- Background for the introduction of new common forms and models
- Basic knowledge of Work Permits and Safe Job Analysis
- How to fill in th eforms and description of work processes

Course code: MTP-011
Course type: E-learning course
Duration: 150 minutes
Language: English, Norwegian
Price: NOK 1150,-

Who is this course for:
All categories of crane operators who have completed a basic slinger course.

Is previous experience required?
Completed basic slinger course.

How will this course benefit me?
All usage, storage, and inspections of lifting equipment shall be in accordance with the producer's instructions and requirements stipulated in the NORSOK R-003 standard. Lifting equipment shall be used only by personnel who have and can document competence in lifting operations.

This course provides a basic review and update of knowledge of lifting equipment in accordance with applicable standards.

How will this course benefit my company?
By ensuring you have required knowledge as a basic slinger.

What standards are referred to in this course?
NORSOK R-003, 2017

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-010
Course type: E-learning course
Duration: 60 minutes
Language: English, Norwegian
Price: NOK 1150,-

Who is this course for:
All categories of crane operators who have completed a basic rigging course.

Is previous experience required?
A basic rigging course.

How will this course benefit me?
This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations.
All rigging operations shall be performed according to applicable safety regulations. These specifications are stipulated in the NORSOK R-003 standard and in the Regulations for using work equipment.
Only personnel who have documented rigger training may perform rigging operations. This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations.

How will this course benefit my company?
By ensuring you have required knowledge as a basic rigger.

What standards are referred to in this course?
NORSOK R-003, 2017

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-105
Course type: E-learning course
Duration: 75 Minutes
Language: English
Price: GBP 50,-

Who is this course for?

This course is aimed at Individuals who are responsible for the ongoing monitoring of hot work sites. 

 

Is previous experience required? 

You do not need prior knowledge or experience to complete this course. It is assumed that you are competent in your designated role.

 

How will the course benefit me?

This course will provide you with the skills required to safely carry out the role of a Gas Monitor.

 

How will the course benefit my company?

This course aims to ensure that personnel are provided with the knowledge and techniques necessary to carry out gas monitoring at hot work sites.

 

What standards or regulations are referenced in the course?

• The Health and Safety at Work Act

• The Management of Health and Safety at Work Regulations

• The Control of Substances Hazardous to Health Regulations (COSHH)

• The Offshore Installations (Prevention of Fire and Explosion, Emergency Response - PFEER) Regulations

• Confined Space Regulations 

 

Is there an assessment?

At the end of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-010
Course type: E-learning course
Duration: 35 minutes
Language: English
Price: NOK 500,-

Who is the course for?

All offshore and onshore personnel who require an awareness of the hazards involved in working at height.

Is previous experience required?

No previous experience is required to complete this course.  

How will the course benefit me?

By increasing your awareness of the potential hazards of working at height and the steps that can be taken to reduce your risk of injury.

How will the course benefit my company?

This course is aligned to industry best practice and aims to make personnel aware of the protentional hazards of working at height and the controls that can be implemented to reduce risk.

What standards are referenced in the course?

Work at Height Regulations

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MUK-001
Course type: E-learning course
Duration: 45 Minutes
Language: English
Price: NOK 500,-

Course goal: This course aims to provide learners with an overview of industry best practice in relation to confined space entry work.

 

Target Audience: All personnel involved with confined space entry work within the Oil and Gas Industry.

 

Learning Objectives

LO1 Explain what is meant by a Confined Space

LO2 Give examples of Confined Spaces

LO3 Describe the dangers that can be caused by confined space entry work

LO4 Identify the key pieces of legislation that help to control confined space entry work

LO5 Explain how to avoid entering confined spaces

LO6 Explain the importance of having a Safe System of Work in place

LO7 Describe individual roles and responsibilities involved in Confined Space Entry Work

LO8 Explain the requirements for gas testing

LO9 Identify acceptable levels for atmospheric test results

LO10 Give examples of Confined Space Entry site safety equipment

LO11 Explain the actions to take in an emergency situation

LO12 Explain Confined Space Entry alarm procedures

Course code: MTP-066
Course type: E-learning course
Duration: 10 minutes
Language: English and Norwegian
Price: NOK 250,-

This course is designed to raise the awareness of GDPR (2018) throughout the workforce.

We will familiarise staff with the rights of individuals and the obligations of companies.

Learn which territorial areas are affected, and understand the consequences of the improper sharing of personal data, and how to deal with a data breach, should it occur.

The course content is developed in cooperation with Advokatfirmaet Schjødt AS.

 

Course code: MUK-006
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Course goal: To increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practice for the correct handling techniques for safe lifting, and for the pushing and pulling of loads.

Target Audience: This course is aimed at all personnel working onshore and offshore

Learning Objectives

LO1 Define the term ‘manual handling’ and explain the importance of safe manual handling operations
LO2 Identify the types of injuries that may result from manual handling operations
LO3 Identify the legislation that is in place to regulate manual handling operations
LO4 Describe the duties that are placed on employers and employees by the Manual Handling Operations Regulations
LO5 Explain the importance of risk assessing manual handling operations
LO6 Identify the factors to consider when assessing manual handling operations and identify ways of reducing the risks of injury
LO7 Describe good handling techniques for safe lifting and the importance of working withinthe HSE manual handling risk assessment guidelines
LO8 Describe good handling techniques forpushing and pulling loads
LO9 Explain the training requirements associated with manual handling operations

Course code: MUK-003
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Course Goal: This course aims to give offshore personnel the knowledge required to understand the hazards and controls associated with working in an environment where they could potentially be exposed to H2S.

Who is the course for?

All personnel who could potentially be exposed to hydrogen sulphide in the workplace on offshore installations

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Learning Objectives

LO 1 Explain the physical properties and sources of H2S, and identify the areas on an offshore installation where you would expect to encounter H2S

LO 2 Explain the physiological effects of exposure to varying toxicity levels of H2S

LO 3 Explain the responsibilities and duties of all personnel and their duties under current legislation

LO 4 Explain the current legal occupational exposure limits for short- and long-term exposure periods relating to H2S

LO 5 Describe the various methods for detecting H2S 

LO 6 Describe the various personal and respiratory protection equipment required for undertaking tasks in areas where H2S may be present

LO 7 Explain the hazardous area classifications which may be encountered on an offshore installation and the associated control measures required  

LO 8 Explain the formal requirement for H2S contingency plans on installations

LO 9 Identify the different alarms encountered offshore and the emergency and evacuation procedures that should be followed

Course code: MTP-004
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English, Norwegian
Price: NOK 1350,-

The course is for all those who work with or may come in contact with chemicals, and is also intended for those who may be dealing with workplace environment issues, purchasing, or transportation. The E-learning course will give the target group fundamental knowledge of safe use of chemicals.

 

The course educates participants in the handling of chemicals so that chemicals are used responsibly and in accordance with requirements laid down by the relevant authorities in relation to this work.


Course Content

- Mapping
- Classification and labelling
- Safety datasheet and substances and chemicals registers
- Exposure
- Risk assessment
- Protective equipment
- First aid

Course code: MUK-016
Course type: E-learning course
Duration: 5 hours
Language: English
Price: GBP 150,-

The OPITO approved course can now be completed online.

 

Due to the current COVID-19 situation, OPITO has altered the required processes to gain accreditation. You no longer have to attend an invigilation centre to complete this course, but must prove identity where required.

 

Self Sponsors:

If you are purchasing this course for yourself, please send a ""Selfie"" of your full face to prove your identity including your personal ID within this to learningcentre@mintragroup.com This must be provided before, or on the same day of completion to gain your approved certificate.

 

Who is the course for?

This course contains the underpinning knowledge required for Authorised Gas Testing which are required for those involved in carrying out tests for oxygen and for flammable and toxic gases prior to hot work or work in a confined space; and for those involved in performing safety watch duties for hot work activities.

 

Is previous experience required? 

It is expected that as a participant in this course, you will have received formal training in gas testing and that you hold suitable qualifications. 

 

How will the course benefit me?

The risk of incidents involving gas occurs across the international oil and gas industry, particularly when working in confined spaces or during hot work. This course will give you a basic understanding of gas hazards and how these can be mitigated by testing and other control measures. 

 

The knowledge gained in this course will help you understand how, when and where to carry out the necessary gas tests prior to confined space entry activities. 

 

How will the course benefit my company? 

By correctly ensuring that atmospheres are safe for hot work or work activities in confined spaces, you contribute to the safety of the asset, your fellow workers and yourself. A reduction in incidents means a safer working environment for everyone. 

 

What standards are referenced in the course? 

This course is based on the OPITO Approved Authorised Gas Tester. Standard code 9240 and 9242 (Digital Delivery)

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the course elements and have a pass mark of 80%

Course code: MTP-057
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian, Po ...
Price: NOK 400,-

Who is this course for:
Users of scaffolding as a work platform.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course has been developed for users of scaffolding as a work platform in accordance with § 17-5 in «Regulations concerning the performance of work», and is a supplement to the training provided at your workplace. After completing this course, you should have a good understanding of the principles to do with the construction, functioning, maintenance and use of scaffolding so that incidents and accidents can be avoided.


How will this course benefit my company?
By ensuring you have the understanding of the principles to do with the contstruction, functioning, maintenance and use of scaffolding.

What standards are referred to in this course?
§ 17-5 in «Regulations concerning the performance of work»

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-900
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English, Norwegian
Price: NOK 850,-

The course will give the target group fundamental knowledge of safe use of chemicals.

The course is relevant for personnel who work at Statoil installations, and those who work with or may come in contact with chemicals.


Course Content
- Introduction
- Mapping of the organization
- Chemical use and properties
- Exposure
- Risk evaluation
- Risk reducing measures
- Protective equipment
- When luck runs out
- Governing documents in Statoil

Course code: MUK-026
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Course goal: This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace.

Learning Objectives

LO1 Explain the principles of, and steps involved in, the Risk Assessment process
LO2 Explain that employers have a responsibility for completing Risk Assessments and that employees have a duty to follow Risk Assessment outcomes
LO3 Identify a typical Risk Assessment form
LO4 Explain the requirements of the Risk Assessment team
LO5 Recognise and explain Risk Assessment terminology
LO6 Identify the different steps within the Risk Assessment process
LO7 Identify common, industry-specific hazards
LO8 Determine the appropriate level of Risk Assessment that may be required
LO9 Explain how to use a Risk Matrix to evaluate the level of risk
LO10 Explain how to identify appropriate control measures based on the Hierarchy of Control
LO11 Explain what is meant by ‘Initial Risk’ and ‘Residual Risk’
LO12 Describe what to do if any Residual Risk remains too high
LO13 Explain how to carry out a Personal Risk Assessment and recognise its importance before each task
LO14 Explain the importance of Dynamic Risk Assessment
LO15 Identify situations where ‘Stopping the Job’ may apply
LO16 Explain the importance of communicating the outcomes of a Risk Assessment
LO17 Understand the importance of communicating ‘Lessons Learned’

Course code: MUK-070
Course type: E-learning course
Duration: 20 minutes
Language: English
Price: NOK 500,-

The course provides learners with an awareness of the environmental impacts associated with offshore waste and to explain how these waste streams can be managed.

 

Learning Objectives

- LO1 Explain the importance of reducing and managing waste in general
- LO2 Identify the different types of waste that are generated offshore
- LO3 Describe the environmental impacts associated with waste streams
- LO4 Identify the regulatory controls relating to waste
- LO5 Describe the waste hierarchy
- LO6 Explain the ways in which companies can manage and control waste to minimise environmental impact
- LO7 Describe the everyday actions that all personnel can take in order to minimise waste

Course code: MUK-022
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Course goal: This course aims to provide learners with an understanding of the dangers of asbestos, and how the risk involved in working with asbestos can be mitigated

Learning Objectives

LO1 Explain what asbestos is

LO2 Describe the hazards of asbestos

LO3 Describe the various types, properties and uses of asbestos

LO4 Identify areas where asbestos may still be found and describe how to identify its presence

LO5 Identify the risk reduction methods when working with asbestos

LO6 Describe the general procedures to deal with an emergency involving the uncontrolled release of asbestos dust

Course code: MUK-118
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?
Maritime personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an overview of the International Ship and Port Facility Security (ISPS) Code

How will this course benefit my company?
By ensuring you have an overview of the International Ship and Port Facility Security (ISPS) Code

What standards are referred to in this course?
ISPS Code

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-063-FT
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 1150,-

Who is this course for?

Everyone working on low and high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

 

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

 

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MTP-035
Course type: E-learning course
Duration: 70 minutes
Language: English, Norwegian
Price: NOK 2100,-

Who is this course for:
Every seafarer without designated security duties (STCW Table A-VI/6-1)

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
Piracy and armed robbery is a real threat to seafarer’s onboard ships and mobile units at sea. 1st January 2014 a requirement about seafarer’s security training was put in force for all ships to which the ISPS Code applies.


The training consists of an e-learning course and the performance of certain on board activities described in a checklist. The client’s approved instructors must sign completed checklists for each trainee.

When the training is completed a certificate is issued by the Norwegian Maritime Authority.

How will this course benefit my company?
By ensuring you have the knowledge and are certified according to the STCW regulations.

What standards are referred to in this course?
STCW - Security Awareness, table A-VI/6-1
This training programme in Ship Security Awareness has been approved by the Norwegian Maritime Authority.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-015
Course type: E-learning course
Duration: 15 minutes
Language: English, Norwegian
Price: NOK 750,-

An introduction to ergonomics in the workplace, especially offshore related work. The course looks at correct working techniques, what makes a good working environment, what measures that helps, and who is responsible for maintaining good ergonomic conditions in the workplace.

 

Course Content

- Introduction 

- Correct working techniques 

- Environment 

- Measures that help 

- Responsibility and implementation

Hits per page
| 1 ... |