Kurskatalog

Who is this course for?

Personnel responsible for cooking, preparing or handing food and others working in the kitchen/galley/dining areas.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an introduction to industry best practice in relation to food safety, health and hygiene.

How will this course benefit my company?

This course will provide personnel with an introduction to industry best practice in relation food safety, health and hygiene and help reinforce the importance of good food safety practices in the workplace.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Kurset er kun tilgjengelig på engelsk.  

Kurset har fokus på forebygging av fallende gjenstander og bruker Samarbeid for sikkerhet sin siste revisjon av håndboken i anbefaling 024 (rev. 4 2018) som retningsgivende. Gjennom økt forståelse for begrepet fallende gjenstander, bruk av praktiske verktøy, hjelpemidler og metoder er intensjonen at kursdeltakere skal være mer observant for dette i sin arbeidshverdag. Denne revisjonen er utgitt 24-02-20. 

Kursinnhold

- FG-verktøy
- FG-kategorier
- Observasjonsteknikker
- Barrierer
- Utbedring av FG-funn

Kontaktinfo: 

Kontakt AAK Energy for mer info: 

T: 911 60 800 
E-post: post.aak@nog.no            

Kontaktperson: Inge Køhl

Hensikten med kurset er å gi en oversikt over industriens beste fremgangsmåter for entring av rør og tanker.

Etter fullført kurs skal brukeren kunne:
- Vite hva en lukket tank er
- Gi eksempler på lukkede tanker 
- Beskrive farene i forbindelse med entring av rør og tanker
- Identifiser de viktigste lover og regler i forbindelse med entring av rør og tanker
- Forklare hvordan du kan unngå å entre rør og tanker
- Forklare viktigheten av å følge et Sikkert Arbeidssystem
- Beskrive de individuelle rollene og ansvarsfordelingen for arbeid i rør og tanker
- Forklare viktigheten av gasstesting
- Identifiser akseptable nivåer etter en gasstest
- Gi eksempler på arbeidsutstyr beregnet på entring av rør og tanker
- Forklare hvilke rutiner man skal følge i en nødsituasjon
- Forklare alarmprosedyrene i forbindelse med entring av rør og tanker

Kurset er kun tilgjengelig på engelsk. 

Who is this course for?

Personnel throughout an organisation which operates within major accident hazard sectors.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to major accident hazards.

How will this course benefit my company?

By ensuring you have had an introduction to major accident hazards.

What standards are referred to in this course?

The Offshore Installations (Safety Case) Regulations

The Offshore Installation and Pipeline Works (Management and Administration) Regulations (MAR)

The Offshore Installations (Prevention of Fire andf Explosion and Emergency Response) Regulations (PFEER)

The Offshore Installations and Wells (Design and Contruction) Regulations (DCR)

The Control of Major Accident Hazards Regulations (COMAH)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Kurset er kun tilgjengelig på engelsk. 

Who is this course for:
Maritime personnel, onshore and offshore.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?
The course looks at the purpose of the ISM Code, which is to maintain safety in international shipping, reduce pollution from vessels, protect the exterior environment and prevent injury or loss of human life.

How will this course benefit my company?

By ensuring you have the knowledge of the purpose of the ISM Code.

What standards are referred to in this course?

The International Convention for the Safety of Life at Sea (SOLAS)

The International Ship and Port Facility Security (ISPS) Code 

The International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

The International Safety Management (ISM) Code 

The International Convention for the Prevention of Pollution from Ships (MARPOL)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Dette kurset vil gi deg en grunnleggende forståelse av farene ved Benzen eksponering og beste praksis ved arbeid på systemer hvor slik eksponering kan forekomme.

Hensikten med kurset er å gi en introduksjon til utfordringer med korrosjon i olje- og gassindustrien.

Etter fullført kurs skal brukeren kunne:
- Hva som menes med korrosjon og hvorfor det utgjør en risiko for olje- og gassindustrien
- Områder der korrosjon vanligvis oppstår i olje- og gassanlegg
- Elementer som er nødvendige for at korrosjon skal kunne oppstå
- De viktigste korrosjonsmedier som funnes i olje- og gassanlegg og hvordan disse kan føre til korrosjon
- Ulike typer korrosjon
- Hvordan korrosjon kan påvirke brønner og rørledninger
- Hvordan korrosjon kan påvirke anlegg og rørledninger
- Hvordan korrosjon kan påvirke gassystemer
- Hvordan korrosjon kan påvirke vannsystemer
- Hvordan korrosjon kan påvirke deadleg områder
- Områder hvor utvendig korrosjon er mest utbredt
- Tiltak for å begrense korrosjon
- Hvordan du spiller en rolle for å minimere korrosjon

Kurset er kun tilgjengelig på engelsk. 

Dette er et kurs innen elektriske installasjoner i eksplosjonsfarlige områder. Målet med kurset er at de som skal arbeide i eksplosjonsfarlige områder, kan utføre arbeidet på en sikker og god måte.

Kurset dekker de kravene som stilles til personell som arbeider i eksplosjonsfarlige områder. Teorien er hentet fra CENELEC og IEC sine normer.

Ved hjelp av tekst, bilder, video, animasjoner og 3D blir man bedre kjent med eksplosjonsfarlige områder og deres særtrekk.

Arbeidsmiljøloven §3-5 forplikter arbeidsgiver og bedriftsledere å gjennomgå opplæring i HMS. Dette kurset tilfredsstiller arbeidsmiljølovens krav til HMS-opplæring for øverste leder.

Kurset inneholder følgende moduler: 

• Et arbeidsliv i endring 

• Arbeidsmiljøloven

• Risikostyring

• Frisk nok til å jobbe

• Systematisk HMS Arbeid

I tillegg gis en kort gjennomgang av verneombudsrollen, Arbeidsmiljøutvalget, psykososialt arbeidsmiljø, rusmisbruk, 

Ergonomi og organisasjon, ledelse og samarbeid. 

Kurset dekker lovkravet i arbeidsmiljølovens §3-5.

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel who are involved in the preparation of dangerous goods for transportation by sea.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

This course aims to provide learners with industry best practice in relation to the transportation of dangerous goods by sea. The course should enable personnel to recognise the classes of dangerous goods and to pack, mark, label and document articles and items correctly.

How will the course benefit my company?

By ensuring you are familiar with industry best practice in relation to the transportation of dangerous goods by sea.

What standards are referenced in the course?

• International Convention for the Safety of Life at Sea (SOLAS)

• International Maritime Dangerous Goods (IMDG) Code

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Who is this course for?

This course is aimed towards all personnel who use abrasive wheels in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

How will this course benefit my company?

The course will benefit companies by providing personnel with knowledge of how to avoid risks and hazards when using abrasive wheels, subsequently reducing accidents and injuries in the workplace.

What standards are referred to in this course? 

• Provision and Use of Work Equipment Regulations (PUWER) 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with a broad overview of common Electrical Safety Rules, and outlines best practice when working with electricity.

How will this course benefit my company?

By ensuring you have the knowledge of common Electrical Safety Rules, and the best practice when working with electricity, to reduce risk and injury at work.

What standards are referred to in this course?

• Health and Safety at Work Act

• Electricity at Work Regulations

• Management of Health and Safety at Work Regulations

• Electricity at Work Safe Working Practices

• Offshore Electricity and Noise Regulations

• Provision and Use of Work Equipment Regulations

• BS 7671: 2018 Requirements for Electrical Installations

• Offshore Installations (Safety Case) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hensikten med kurset er å introdusere prosessen for endringsstyring.

Etter fullført kurs skal brukeren kunne:
- Hvorfor effektiv endringsstyring er en viktig del av driften i olje- og gassindustrien
- Definere endring
- Stadier i prosessen for endringsstyring
- Involverte roller og ansvar
- Risiko forbundet med endringsstyring
- Hvordan risiko forbundet med endringsstyring kan styres

Kurset er kun tilgjengelig på engelsk. 

Who is this course for?

This eLearning course is aimed at individuals who are required to work with wells in the oil and gas industry.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide learners with an overview of well integrity and its importance in maintaining safe and secure operations

This course contains the following sections:

Section 1: Well Integrity Overview

Section 2: Well Categorisation and Well Barriers

Section 3: Well Design and the Cementing Process

Section 4: Human Factors in Well Integrity

How will this course benefit my company?

To ensure you have an overview of well integrity and its importance in maintaining safe and secure operations

What standards are referred to in this course?

This course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Este curso está diseñado para permitirle:

• Definir qué se entiende por "caída de objetos".

• Identificar cuáles son las causas comunes de la caída de objetos y sus consecuencias y explicar la importancia de eliminar o reducir el riesgo de que ocurran incidents.

• Identificar las obligaciones de los empleadores y los empleados para eliminar los incidentes de caída de objetos.

• Identificar las áreas que presentan un alto potencial de lesiones al personal en caso de ocurrir un incidente de caída de objetos.

• Identificar ejemplos de malas prácticas.

• Describir las medidas que se deben adoptar para controlar el riesgo de caída de objetos

Course goal: Kurset har som formål å øke brukerens bevissthet rundt viktigheten med personlig verneutstyr. Kurset gjør rede for hvilke plikter og ansvar ansatte og arbeidsgiver har med tanke på personlig verneutstyr.

Learning Objectives

LO1 Definere hva som menes med personlig verneutstyr.

LO2 Identifisere ulike typer personlig verneutstyr.

LO3 Identifisere typiske krav som er knyttet til personlig verneutstyr.

LO4 Beskrive tiltakshierarkiet og vite hvor personlig verneutstyr er plassert i dette. 

LO5 Forklare hvorfor vi må vurdere om det personlige verneutstyret er velegnet og kompatibelt med annet utstyr.

LO6 Forklare kravene til vedlikehold av personlig verneutstyr.

LO7 Beskrive plikter og ansvar den ansatte har i forhold til personlig verneutstyr.

LO8 Forklare hvorfor det er viktig med god informasjon, instruksjon og opplæring i bruk av personlig verneutstyr.

Who is this course for?

Personnel who work with pressurised cylinders, compressed gas or associated equipment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an overview of the use of pressurised cylinders, the risks involved and storage requirements.

How will this course benefit my company?

By ensuring you have an overview of the use of pressurised cylinders, the risks involved and storage requirements.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All personnel who are at risk from slips, trips and falls.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

How will the course benefit my company?

This course will benefit companies’ by reducing slip, trip and fall injuries among personnel.

What standards are referenced in the course?

Health and Safety at Work Act

Management of Health and Safety at Work Regulations

Workplace (Health, Safety and Welfare) Regulations

Health and Safety Executive (HSE)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?

Supervisors and employees who require an overview of Behavioural Observation Safety Systems.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an introduction to behavioural observation safety systems.

How will this course benefit my company?

Behavioural observation safety systems aim to improve workplace safety by focussing on what personnel do, and why they do it, and then applying strategies that promote safe behaviours in the future.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.