Oil and Gas

Course catalogue

hits
664
Course code: NI-026
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian / English
Price: NOK 400,-

The course covers the following topics:

- Duties for safety representatives
- Tools
- Safety inspections
- Management and support

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Course code: MUK-001-FT
Course type: E-learning course
Duration: N/A
Language: English
Price: NOK 500,-

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

 

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates abespoke course to address these knowledge gaps.

 

This course covers the following learning objectives:

 

LO1 Explain what is meant by a Confined Space

LO2 Give examples of Confined Spaces

LO3 Describe the dangers that can be caused by confined space entry work

LO4 Identify the key pieces of legislation that help to control confined space entry work

LO5 Explain how to avoid entering confined spaces

LO6 Explain the importance of having a Safe System of Work in place

LO7 Describe individual roles and responsibilities involved in Confined Space Entry work

LO8 Explain the requirements for gas testing

LO9 Identify acceptable levels for atmospheric test results

LO10 Give examples of Confined Space Entry site safety equipment

LO11 Explain the actions to take in an emergency situation

LO12 Explain Confined Space Entry alarm procedures

Course code: KYS-001
Course type: E-learning course
Duration: 3-5 hours
Language: English
Price: NOK 6900,-

The course provides employees who are responsible for drinking water offshore, or tasks associated with this, increased knowledge and understanding to provide good, sufficient and safe drinking water to the staff on board.

Satisfy the requirements for competence in relation to the Norwegian Public Health Institute’s guidelines: “Nok, godt og sikkert drikkevann offshore.”

After the course you should:
- Know about and be able to orient yourself in the relevant regulations with emphasis on the public health department's supervisor “Nok, godt og sikkert drikkevann offshore"
- Understand the distinction between drinking water affect the installation's water system, and people's health
- Understand the purpose of the various laboratory analyzes used to monitor the quality of water
- Know which analyzes offshore employees are responsible for themselves, and what responsibilities they have in connection with the analyzes that must be sent to an accredited laboratory
- Be able to interpret results from laboratory analyzes and know what action offshore staff must implement when results are abnormal and/or critical
- Understand the structure of a drinking water system offshore, and where in the system offshore personnel has responsibility for operation and maintenance

Please note: this course is also available in an Norwegian-language version.

The course is delivered by the accredited laboratory SINTEF NORLAB AS. 

Course code: MUK-221
Course type: E-learning course
Duration: 45 minutes
Language: English (US)
Price: NOK 500,-

Who is this course for?

All personnel involved in warehouse safety operations in the workplace.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to identify the hazards specific to warehousing and provide advice on how to avoid these hazards.

 

How will this course benefit my company?

By ensuring you are able to identify the hazards specific to warehousing and provide advice on how to avoid these hazards.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-087
Course type: E-learning course
Duration: 150 minutes
Language: English
Price: NOK 1500,-

Who is this course for?

Process and Production personnel

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

By ensuring you have an overview of industry best practice associated with gas treatment

 

This course contains seven modules:

Module 1: Introduction to Gas Treatment

Module 2: Problems Associated with Water in Gas Streams

Module 3: Liquid Desiccant Dehydration

Module 4: Solid Desiccant Dehydration

Module 5: Alternative Gas Dehydration Processes

Module 6: Acid Gas Removal Unit

Module 7: Removal of Other Impurities in Raw Gas Streams

 

How will this course benefit my company?

By ensuring you have an overview of industry best practice associated with gas treatment

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MUK-041
Course type: E-learning course
Duration: 150 minutes
Language: English
Price: NOK 1500,-

Who is this course for?

Personnel requiring an awareness and understanding of power generation systems and their associated risks.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to proivde learners with an overview of power generation systems used offshore.

 

How will this course benefit my company?

To ensure you have an overview of the power generation systems used offshore including hazards and their associated controls.

 

What standards are referred to in this course?

The course is made according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-106
Course type: E-learning course
Duration: 1 hour
Language: English
Price: NOK 1000,-

Who is this course for?

Personnel requiring an awareness and understanding of risk management.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course is designed to enable all personnel to have a common and consistent approach to industry best practice in relation to risk management.

 

How will this course benefit my company?

By ensuring you have a common and consistent approach to industry best practice in relation to risk management.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: NI-012
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian / English
Price: NOK 400,-

The course covers the following topics:

- Act and Regulations
- Purpose
- Responsibility
- Participants and roles
- Internal control regulations

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Course code: MUK-162
Course type: E-learning course
Duration: 15 Minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring awareness or understanding of typical chemicals in use for well operations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course

 

How will this course benefit me?

This course aims to provide learners with an awareness of industry best practice for working with chemicals in offshore drilling and well operations

 

How will this course benefit my company?

By ensuring you are aware of industry best practice for working with chemicals in offshore drilling and well operations

 

What standards are referred to in this course?

Offshore Chemicals Regulations (OCR) 2002

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-065-FT
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 700,-

Who is this course for?

Everyone working on high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on high voltage installations.

 

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

 

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: EXT-005
Course type: E-learning course
Duration: 5-hour e-learning
Language: English, Norwegian
Price: NOK 6200,-

The course gives you a basic understanding of the principles of intrinsically safe loops (IS) in potentially explosive areas.

After completing the course, the candidate will have acquired the necessary knowledge about the design of intrinsically safe (IS), choice of equipment, inspection and maintenance in potentially explosive areas.

Our aim is to ensure that the employees are motivated to work safely and securely.

The course lasts 5 hours and the course certificate is valid for 5 years

The e-learning course can also be used as a refresher after 5 years


Themes:

• Understand the general principles for the type of specific protection and correct marking of components approved in intrinsically safe systems (IS)

• Current standard for Exi

• Construction and assessment of intrinsically safe equipment

• Assessment and concrete use of “simple apparatus app”

• Be able to choose and install the correct Exi equipment in hazardous areas according to the standards IEC 60079-14 and 60079-25

• How to work safely with IS

• Competence requirements for performing work on Exi installations

• How to verify and calculate an Exi circuit

 

• Know where to find and how to read relevant standards, data sheets, product sheets and other relevant literature

Course code: PRO-023
Course type: E-learning course
Duration: 2 hours
Language: Norwegian
Price: NOK 2500,-

This course provides an introduction to chemical management, risk assessment of health in relation to work with chemicals. The course is based on the use of ChemiRisk as a tool for risk assessment and CHESS as chemical database. The course consists of three modules (theory, chemical database (CHESS) and using ChemiRisk).

 

Course Content

- Theory

- Substance (CHESS)

- Use of ChemiRisk

 

Course provider: Proactima

Course code: MUK-154
Course type: E-learning course
Duration: 2 hours 30 minutes
Language: English
Price: NOK 1500,-

Who is this course for?

Personnel involved with mechanical material handling equipment and operation, crane operation, rigging, supervision and signalling related activities. 

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

 

How will this course benefit me?

To provide learners with an awareness of industry best practice for working with cranes.

 

This course consists of 4 sections:

Section 1: Introduction to Crane Operations

Section 2: Cranes and Lifting Equipment

Section 3: Planning a Lift

Section 4: Carrying out a Lift

 

How will this course benefit my company?

By ensuring you are aware of industry best practice for working with cranes.

 

What standards are referred to in this course?

• The Lifting Operations and Lifting Equipment Regulations (LOLER) 

• The Provision and Use of Work Equipment Regulations (PUWER) 

• The Safe Use of Lifting Equipment: Approved Code of Practice (ACOP)

• Lifting Equipment at Work Guidance

• Personal Protective Equipment at Work Regulations

• Health and Safety at Work Act s.16

• Management of Health and Safety at Work Regulations

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-092
Course type: E-learning course
Duration: 150 minutes
Language: English
Price: NOK 1500,-

Who is the course for?

All personnel, especially those who require an overview of produced water systems.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course is designed to provide you with a basic knowledge of how water is removed from oil and gas reservoirs and how it is treated prior to reuse or disposal.

How will the course benefit my company?

This course helps to ensure that all personnel apply a common approach to both company and industry best practice in relation to managing produced water.

What standards are referenced in the course?

• The Offshore Petroleum Activities (Oil Pollution Prevention and Control) Regulations 

• The Registration, Evaluation, Authorisation and Restriction of Chemicals Regulation (REACH)

• OSPAR Harmonised Mandatory Control Scheme (OSPAR HMCS)

• US Environmental Protection Agency Federal Insecticide, Fungicide and Rodenticide Act (FIFRA)

• Methodology for the Sampling and Analysis of Produced Water

• Environmental Protection Agency's Method 1664

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: LSI-002
Course type: E-learning course
Duration: 4 hours 30 minutes
Language: Norwegian
Price: NOK 1190,-

This course covers the theoretical part of the documented safety training required for slingers and signallers. The course is also suitable as a refresher for crane operators and other personnel who have previously completed training in lifting appliances and lifting gear. The course content deals with selection, control and safe use of the most common lifting gear used in construction, industry, shipping and offshore. Signalling, communication and controlling the load are key topics of the course.

In addition, the course requires that practical training is conducted on applicable work equipment.

The course contains 9 modules:

• Lifting equipment, expressions and acronyms
• Slinging, center of gravity, working angles and lifting tables
• Fibre slings
• Lifting gears of chain
• Wire rope slings
• Shackles
• Eye bolts, nuts and lifting lugs
• Signals and signs, and control of load
• Safety regulations for lifting operations

Course code: NOG-143-2
Course type: Classroom course
Duration: 1-3 days
Language: Norwegian
Price: From NOK 7900,-
Kurset er utviklet i henhold til Norsk olje og gass plan for opplæring – kurs i fittings og small bore systemer.
Kurset skal gi deltageren grunnleggende kunnskap om oppbygging, virkemåte, montering, testing og vedlikehold av tubing-systemer med tilhørende fittings.
Kurset er en kombinasjon av teori og praksis og avsluttes med en nettbasert eksamen.
Kurskjøper oppfordres til å ta kontakt med aktuelt operatørselskap for å få informasjon om hvilke kurstilbydere det enkelte operatørselskap aksepterer.
 
Kursinnhold

Fittings
- Hovedtyper og deres virkemåte
- Problematikk: Sammenblanding av produsenter
- 1.gangs montering
- Gjenmontering
- Formontering
- Montasje verifisering
- Verktøy
 
Gjenger
- Gjengetyper og deres identifikasjon
- Fare for kaldsveising
- Gjengetabeller
- Gjengetetninger
- Krav til innskrudde gjenger i NPT-gjengeforbindelser
- Tetningsmåter
- Adaptere
 
Tubing
- Materialforståelse (galvaniske effekter). Henvisning til NORSOK M-001 og styrende dokumentasjon hos oppdragsgivere.
- Korrosjon
- Dimensjoner / veggtykkelse
- Merking / sertifisering
- Hvordan behandle tubing korrekt fra produksjon til ferdig montasje
- Forberedelser av tubing for montasje
- Råd knyttet til legging og bøying av tubing
- Bruk av ekspansjonssløyfer for å unngå utmatting
 
Høytrykk-fittings
- Hva menes med høytrykk
- Hvilke typer tubing-fitting (fabrikat) brukes typisk på norske anlegg for høytrykk
Course code: MGM-043
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 400,-

Who is this course for?

Maritime personnel who may be affected by potential baggage searches.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

 

How will this course benefit me?

This course aims to provide an introduction to personnel and baggage searches in the Maritime Industry.

 

How will this course benefit my company?

By ensuring you are aware of the personnel and baggage searches which might be carried out. 

 

What standards are referred to in this course?

SOLAS ch. 11 - ISPS code

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: ITB-004
Course type: Blended course
Duration: 12 Months
Language: English
Price: From GBP 465,-

The OPITO Internal Verifier Award delivered through Blended Learning requires the following:

Computer/Laptop

Webcam

Printer/scanner

The Blended learning is delivered in Stages:

Stage 1 Online registration 1 hour to complete

Stage 2 Self study of the workbook provided

Stage 3 A live webinar 1 day of 6 hours. (sessions run once per week)

The following units will be discussed and practical exercises completed on the live webinar following a 1 hour Exam:

1. Introduction to Internal Verification

1.1 The Purpose of Internal Verification

2. The Internal Verifier’s Role

2.1 Supporting Assessors

2.2 Monitoring and Verifying the Quality of Assessments

2.3 Record Keeping and Feedback

2.4 Assuring the Competence Process

Delegates attending this Internal Verifier Blended Learning training programme will be given a series of explanations and demonstrations that will identify what they are expected to know and do. This will be followed by practical exercises allowing delegates to rehearse their skills, knowledge and understanding of the Internal Verifier role. All practical exercises conducted on the live webinar shall use, wherever possible, the actual paperwork that the delegates are expected to use in their workplace.

Stage 4- Workplace verifications to be completed within 12 months of training to become a fully qualifed OPITO Internal verifier 

OPITO Internal Verifier Award Standard 

Course code: MGM-035
Course type: E-learning course
Duration: 90 minutes + Onboar ...
Language: English
Price: NOK 9500,-

Who is the course for?

This course is for personnel who require an insight into Norwegian maritime rules and regulations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide learners with an introduction to the Norwegian maritime rules and regulations and to provide details of how much of an influence Norway has over the global maritime industry.

How will the course benefit my company?

This course will benefit shipping operators and companies by ensuring that their staff have an awareness of the Norwegian Maritime Authority, Norwegian maritime rules and regulations and all other relevant legislation.

What standards are referenced in the course?

International Safety Management (ISM) Code

Freedom of Information Act

Norwegian International Ship Register Act

Ship Labour Act

Ship Safety and Security Act

Norwegian Maritime Act

International Convention for the Safety of Life at Sea (SOLAS)

International Regulations for Preventing Collisions at Sea (COLREGS)

International Convention for the Prevention of Pollution from Ships (MARPOL)

International Ship and Port Facility Security (ISPS) Code

Norwegian Maritime Code

Maritime Labour Convention (MLC)

Equality and Anti-discrimination Act

Accommodation of Crews Convention

Principles of Safe Manning

International Convention on Standards of Training, Certification and Watchkeeping for Seafarer (STCW)

Norwegian Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: NS-1591-REP
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 4500,-

The course provides knowledge about preparation, planning, execution and documentation of assembling the bolted connections. The course is a combination of theory and practice and concludes with a theoretical test and a practical test with sensor.

The main objective is to provide the necessary expertise, both knowledge and skills to executive responsible person to dismantle, assemble and attract bolted connections in accordance with EN 1591-4 chapter 8.

The timetable covers the following tables in EN 1591-4: 2013: 1, 2, 3, 6, 7, 8 and 9.

Hits per page
| 1 ... 12 ... |