Renewables

Course catalogue

hits
198
Course code: RVT-967
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 15,-
In today's business world, email is often the preferred means of exchanging information, yet many organizations overlook this very important form of business communication. So much of our daily social and business interactions occur over the Internet that it is very easy to take such an important means of communication for granted. Because of the preference for email interaction over other forms of communication, utilizing email in a professional and efficient manner is vital for success.    This course discusses ways to make this most important means of communication effective and efficient so you can produce stellar emails that grab your reader's attention. Tips for structuring emails will be presented, as well as knowledge about proper professional email tone and language.
Course code: OSB-30
Course type: E-learning course
Duration: 25 Minutes
Language: English
Price: GBP 15,-

Managers have a responsibility for the safety of their lone working employees. This course will provide all managers and supervisors with information needed to understand the health and safety acts that apply to lone working and the responsibilities of the employer and employee.

Course code: DP-2267
Course type: E-learning course
Duration: Not set
Language: Norsk
Price: NOK 450,-

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i den digitale notatblokken OneNote 2016. En kombinasjon av videoer, teori, eksempler, oppskrifter og tester gjør det enkelt å lære seg de nye funksjonene og verktøyene. E-læringskurset inneholder 52 opplæringsvideoer.

E-læringskurset er tilpasset Office 365.

Testene i e-læringskurset måler kunnskap før, under og etter opplæringen. Når ettertesten er bestått får du tilgang til et kursbevis i PDF-format som enkelt kan lagres eller skrives ut.

 

Innhold:

- Før du starter

- Notater

- Innholdselementer

- Outlook

- Søking

- Delte notatblokker

- Mobilappen

Course code: EXT-006
Course type: Blended course
Duration: 8-hour e-learning + ...
Language: English, Norwegian
Price: From NOK 10850,-

This course combines self-study by e-learning and classroom training with demonstrations and examples which is useful when working in explosive atmospheres.

The course is suitable for personnel who should have an introduction in potentially explosive areas, marking, equipment, and requirements.

Participants will be introduced to the relevant parts of the NEK 420, IEC 60079 standard (NEK EN 60079-standards) as well as national adaptations where relevant.

Course code: RVT-966
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 15,-

It has become increasingly clear that social media is not just a fad. It is instead, not only a massive change in the way we socialize with others in a personal setting, but also the biggest shift in how we conduct business since the arrival of the Internet. Social media is quickly altering every aspect of corporate operations, such as hiring practices, training, marketing, and even risk management.   The purpose of this course is to introduce you to social media, explore how we use social media personally vs. social media use in a business setting, how its use continues to evolve in the workplace, the benefits of social media, and of course the risks it can present to you personally and to companies.

Course code: STQ-005
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 6500,-

Objective: The course gives personnel a good theoretical and practical basic training in casting the socket according to EN 13411-4


The course gives personnel a good theoretical and practical basic training in casting the socket according to EN 13411-4. The training is for personnel who in their daily work will use or use steel ropes. This can be deck personnel, sailors, drilling personnel, crane operators or inspectors.

The course lasts 1 day (8 hours).


Content:

- Introduction
- Regulations
- Steel rope
- Sockets casting theory according to standard EN-13411-4
- Protective measures during casting
- Practical casting
- Cutting of steel ropes
- Preparation
- Cleaning
- Casting
- Control
- Exam

Course code: AST-003
Course type: E-learning course
Duration: Approx. 90 hours
Language: English
Price: GBP 780,-

The NEBOSH International General Certificate in Occupational Health and Safety (IG) is one of the leading health and safety qualifications recognized globally.  It helps develop your understanding of general workplace issues and how they can be applied in different sectors around the world.

 

The new NEBOSH International Certificate focuses on the role of a real-life health and safety professional. It looks at the real, everyday risks that people encounter and how to manage them to help protect people and profits. 

 

You'll develop the essential risk management skills to create a safe and healthy workplace. And, you’ll have the foundation knowledge to make recommendations to your employer to help them improve health and safety management.

 

Upon completion of this course, learners will be able to:

 

• Justify health and safety improvements using moral, financial and legal arguments

• Advise on the main duties for health and safety in the workplace and help their organisation manage contractors

• Work within a health and safety management system, recognising what effective policy, organisational responsibilities and arrangements should look like

• Positively influence health and safety culture and behaviour to improve performance in their organisation

• Do a general risk assessment in their own workplace – profiling and prioritising risks, inspecting the workplace, recognising a range of common hazards, evaluating risks (taking account of current controls), recommending further control measures, planning actions

• Recognise workplace changes that have significant health and safety impacts and effective ways to minimise those impacts

• Develop basic safe systems of work (including taking account of typical emergencies) and knowing when to use permit-to-work systems for special risks

• Take part in incident investigations

• Help their employer to check their management system effectiveness – through monitoring, audits and reviews

 

Course code: KOL-013
Course type: Classroom course
Duration: 2 days / 16 hours
Language: Norwegian
Price: From NOK 3670,-

Hensikten med kurset er å gi blivende riggere en god teoretisk grunnopplæring i sikker bruk av: Fallsikringsutstyr og enkle løfteinnretninger (enkle travers- og søylesvingkraner, håndtaljer, luft- og eltaljer og transportable vinsjer.Opplæringen gir kandidaten god innsikt i prinsippene for fallsikringsutstyrs, enkle løfteinnretningers og transportable vinsjers konstruksjon, virkemåte, bruk og vedlikehold, slik at uhell og ulykker i forbindelse med riggeoperasjoner unngås.

Deltakeren må ha fullført G11 stroppekurs før kursstart.

Opplæringen dekker den nødvendige teoretiske som er nødvendig for å kunne gjennomføre det praktiske riggekurset, Modul O 3.2.

Kurset avsluttes med en teoretisk prøve. 


Kursinnhold
- Fallsikringsutstyr
- Travers- og søyle- svingkraner
- Håndtaljer, luft- og el-taljer
- Transportable vinsjer
- Avsluttende teoretisk prøve

This course is only available in Norwegian.

Course code: DP-2247
Course type: E-learning course
Duration: 7 hours
Language: Norwegian
Price: NOK 450,-

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i Word 2013. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene. En komplett e-læring med både grunnleggende og videregående emner. E-læringskurset inneholder 64 opplæringsvideoer.

 

Kursinnhold

- Redigering

- Formatering
- Sideformatering
- Språkverktøy
- Tabeller
- Illustrasjoner
- Maler og skjema
Course code: DP-2227
Course type: E-learning course
Duration: 4 hours
Language: Norwegian
Price: NOK 295,-

This course is only available in Norwegian.

E-læringskurset viser aktuelle funksjoner og muligheter i kommunikasjons­programmet Lync 2013. En kombinasjon av videoer, teori og oppskrifter gjør det enkelt å lære seg å kommunisere og samarbeide interaktivt med kolleger og andre kontakter. E-læringskurset inneholder 35 opplæringsvideoer.

Course code: WEC-008
Course type: Classroom course
Duration: Not set
Language: Not set
Price: From NOK 7340,-
Course code: RVT-954
Course type: E-learning course
Duration: 60 minutes
Language: English (US)
Price: GBP 30,-

Stress is our body's way of responding to physical, emotional, or mental demands. Although typically associated with negative circumstances, stress can be caused by both good and bad experiences. Our bodies react to stress by releasing chemicals into the blood to give us energy and strength to handle the situation. This evolutionary reaction can be a good thing when stress is caused by real physical danger; however, this survival response can wreak havoc if it builds up without a proper outlet. This interactive online course discusses signs and symptoms of stress, and explains the physical and emotional effects of built up stress, such as pain and anxiety. The course also describes stress management techniques, treatment options, and lifestyle changes to help alleviate stress.

Course code: STQ-008
Course type: Classroom course
Duration: 3 days
Language: Norwegian / English
Price: From NOK 23490,-

Objective: The aim of the training is that those who are given training receive a repetition of acquired competence in theoretical and practical understanding of safe work operations / emergency operations with offshore cranes so that accidents and incidents can be avoided.


The aim of the training is that those who are given training receive a repetition of acquired competence in theoretical and practical understanding of safe work operations / emergency operations with offshore cranes so that accidents and incidents can be avoided.

The training is according to training plan module P-4.1.1 covers repetition requirements in NORSOK R-003.

Validity:

3 years according to NORSOK
2 years according to OPITO

Holders of a G5 certificate must meet the requirements for updating through module P-4.1.1 "Offshore crane simulator" within three years, and then update this every three years. If this update is not carried out the certificate is still valid, but the G5 certificate holder cannot operate a crane until the requirements for the simulator training have been completed.


Content:

- Introduction
- Accidents and accidents with offshore cranes
- Laws, regulations, standards, regarding offshore cranes
- Operational limitations of crane operations
- Planning of lifting operations (TBT, SJA, Work permits)
- Internal lifting, loading and lifting from / to supply boats, critical lifts, transport of personnel
- Emergency operations
- Communication
- Practical operations use of simulator
- Theoretical and practical exam

Course code: RVT-961
Course type: E-learning course
Duration: 4 hours
Language: English
Price: GBP 120,-

In LearnSmart's Negativity in the Workplace Video Training, you'll learn how negativity serves as an enormous obstacle toward a team's success -- and how this feeling manifests itself in your employees' actions and attitudes. As a supervisor, it is up to you to help prevent negativity from spreading. By dealing with it head-on, and not waiting until it becomes a bigger problem, you put yourself in a better position to avoid a potentially devastating outcome.

 

Course code: KOL-009
Course type: Classroom course
Duration: 42 hours
Language: Norwegian
Price: From NOK 8600,-

Hensikten med opplæringen er å gi truckførere allsidig praktisk opplæring og øvelse i sikker bruk av truck, slik at ulykker i forbindelse med bruken unngås. Opplæringen skal gi fører så gode kjøreferdigheter at vedkommende selvstendig på en sikker måte skal kunne gjennomføre oppdrag med truck.

Truckfører må imidlertid gjennomføre typeopplæring på den trucken som til enhver tid benyttes i tillegg til sertifisert sikkerhetsopplæring. Opplæringen avsluttes med en praktisk prøve som innbefatter kontroll og bruk av aktuelle trucker.

Bestått praktisk prøve på aktuelle trucker vil være grunnlag for utstedelse av kompetansebevis for fører av truck

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser

Modul 2.2 (14 timer) Truck 

Modul 3.2 (6 timer) Praktisk bruk

Modul 4.2 Bedriftsoppl. - 20 timer Oppl.virksomhet-14 timer

 

The course is only available in Norwegian.

 

Course code: DP-2264
Course type: E-learning course
Duration: Not set
Language: Norsk
Price: NOK 450,-

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i presentasjonsprogrammet PowerPoint 2016. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene og verktøyene. En komplett e-læring med både grunnleggende og videregående emner. E-læringskurset inneholder 82 opplæringsvideoer.

E-læringskurset er tilpasset Office 365.

Testene i e-læringskurset måler kunnskap før, under og etter opplæringen. Når ettertesten er bestått får du tilgang til et kursbevis i PDF-format som enkelt kan lagres eller skrives ut.

 

Innhold:

- Før du starter

- Utforming

- Tekst

- Bilder

- Figurer

- SmartArt-grafikk

- Diagram

- Tabeller

- Medier

- Framvisning

Course code: AST-006
Course type: E-learning course
Duration: 40 hours
Language: English
Price: GBP 595,-

The IEMA Foundation course provides staff with a solid knowledge of the environment, sustainability, and governance principles relevant to organizations.  It covers specific management tools and skills with a practical application for the workplace to enable staff to improve performance.

 

Develop the knowledge and skills to help improve sustainability and environmental performance

Learn practical skills to help reduce the impacts of the organization on the environment

 

Upon completion of this course, learners will be able to:

 

• Understand business, governance, and environmental principles and their relationship with organizations, products, and services

• Ensure compliance with major environmental policy and legislation 

• Implement specific tools, techniques, systems, and practices to improve sustainability performance

• Collect data, perform analysis and evaluate information to provide sustainable solutions

• Implement change and transformation to improve sustainability

 

Course code: GWO-001
Course type: Classroom course
Duration: 4 hours
Language: Norwegian
Price: From NOK 2395,-

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course participants will gain the knowledge and skills to handle manual lifting properly and ensure their own safety with proper lifting in accordance with ergonomics.

The aim of this module is to encourage positive manual handling behavior and train delegates ability to perform manual handling tasks in a safe manner in the wind turbine industry / environment.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

 

- Global Wind Organization (GWO)

- Labor Inspection (Regulations)

 

Competence for "Manual handling" must be maintained in accordance with guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Course code: WEC-006
Course type: Classroom course
Duration: 24 hours
Language: Norwegian
Price: From NOK 5660,-

Hovedmålet med kurset er at den som gis opplæring tilegner seg tilstrekkelige kunnskaper om sikker bruk av løfteredskap slik at ulykker ved bruk unngås.

Regelverksreferanse:

Modul 1 - 2.3

Course code: WBB-002-12
Course type: Course package
Duration: 7 Hours
Language: English
Price: GBP 250,-

With COVID-19 meaning that home working is no longer an option but a necessity for many, what are the potential side effects on our health and work performance. Employers may need to provide additional training to ensure appropriate supervision and work behaviours. These include remote technology, communication skills development, time management and ergonomics.

 

Effective remote working requires greater self-control and discipline to avoid the boundaries between work and personal life becoming blurred. Research has shown that, in general, homeworkers tend to work longer than office workers and this increases with the use of technology. Homeworkers do benefit from greater working time autonomy, but how effectively this is applied depends on the discipline of the individual.

 

The ‘Effective Remote Working’ bundle includes 3 months access to 10 online courses and over 7 hours of eLearning.  

 

• Management of Change

• Lone Working (Employees)

• Smart Workplaces: Responsible Social Media for Team members

• Business Writing: E-Mail Techniques

• AEC Success: Effective Decision Making

• Webinars – Conducting a Web-based Presentation

• ABCs of Managing Time & Effort: The 80/20 Way

• Smart Time Management: 7 Steps to Regaining Control of Your Day

• 3-way Communication

• Smart Customer Service 3: Effective Verbal and Nonverbal Communication

Hits per page
| 1 ... 7 |