Renewables

Course catalogue

hits
225
Course code: MUK-010
Course type: E-learning course
Duration: 35 minutes
Language: English
Price: GBP 40,-

Who is the course for?

All offshore and onshore personnel who require an awareness of the hazards involved in working at height.

Is previous experience required?

No previous experience is required to complete this course.  

How will the course benefit me?

By increasing your awareness of the potential hazards of working at height and the steps that can be taken to reduce your risk of injury.

How will the course benefit my company?

This course is aligned to industry best practice and aims to make personnel aware of the protentional hazards of working at height and the controls that can be implemented to reduce risk.

What standards are referenced in the course?

Work at Height Regulations

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MTP-066
Course type: E-learning course
Duration: 10 minutes
Language: English and Norwegian
Price: NOK 250,-

This course is designed to raise the awareness of GDPR (2018) throughout the workforce.

We will familiarise staff with the rights of individuals and the obligations of companies.

Learn which territorial areas are affected, and understand the consequences of the improper sharing of personal data, and how to deal with a data breach, should it occur.

The course content is developed in cooperation with Advokatfirmaet Schjødt AS.

 

Course code: MTP-004
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English, Norwegian
Price: NOK 1350,-

The course is for all those who work with or may come in contact with chemicals, and is also intended for those who may be dealing with workplace environment issues, purchasing, or transportation. The E-learning course will give the target group fundamental knowledge of safe use of chemicals.

 

The course educates participants in the handling of chemicals so that chemicals are used responsibly and in accordance with requirements laid down by the relevant authorities in relation to this work.


Course Content

- Mapping
- Classification and labelling
- Safety datasheet and substances and chemicals registers
- Exposure
- Risk assessment
- Protective equipment
- First aid

Course code: MTP-057
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian, Po ...
Price: NOK 400,-

Who is this course for:
Users of scaffolding as a work platform.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course has been developed for users of scaffolding as a work platform in accordance with § 17-5 in «Regulations concerning the performance of work», and is a supplement to the training provided at your workplace. After completing this course, you should have a good understanding of the principles to do with the construction, functioning, maintenance and use of scaffolding so that incidents and accidents can be avoided.


How will this course benefit my company?
By ensuring you have the understanding of the principles to do with the contstruction, functioning, maintenance and use of scaffolding.

What standards are referred to in this course?
§ 17-5 in «Regulations concerning the performance of work»

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-022
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Course goal: This course aims to provide learners with an understanding of the dangers of asbestos, and how the risk involved in working with asbestos can be mitigated

Learning Objectives

LO1 Explain what asbestos is

LO2 Describe the hazards of asbestos

LO3 Describe the various types, properties and uses of asbestos

LO4 Identify areas where asbestos may still be found and describe how to identify its presence

LO5 Identify the risk reduction methods when working with asbestos

LO6 Describe the general procedures to deal with an emergency involving the uncontrolled release of asbestos dust

Course code: MTP-063-FT
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 1150,-

Who is this course for?

Everyone working on low and high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

 

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

 

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MGM-007
Course type: E-learning course
Duration: 40 minutes
Language: English, Norwegian
Price: NOK 700,-

Who is this course for?

This course is relevant for all personnel who may affect or be affected by cyber security.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

 

How will this course benefit me?

This course aims to provide learners with an introduction to cyber-security and cyber-risks, and how by improving personal awareness of cyber-risks can improve cyber-security overall.

 

How will this course benefit my company?

By ensuring you are aware of the cyper-risks. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-015
Course type: E-learning course
Duration: 15 minutes
Language: English, Norwegian
Price: NOK 750,-

An introduction to ergonomics in the workplace, especially offshore related work. The course looks at correct working techniques, what makes a good working environment, what measures that helps, and who is responsible for maintaining good ergonomic conditions in the workplace.

 

Course Content

- Introduction 

- Correct working techniques 

- Environment 

- Measures that help 

- Responsibility and implementation

Course code: MUK-027
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Who is the course for?

All personnel who may be exposed to Naturally Occurring Radioactive Material (NORM) in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide an awareness of NORM and provide best practices for managing NORM in oil and gas producing facilities.

How will the course benefit my company?

The course will benefit companies by ensuring that all members of personnel have an awareness of NORM and how it should be managed, which will help to reduce workplace accidents. 

What standards are referenced in the course?

There are no standards or regulations referenced in this course.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MUK-031
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: GBP 40,-

Course goal: To increase learners’ awareness of the potential for dropped objects, and to outline the responsibilities of personnel and actions to be taken to prevent dropped object incidents occurring. 

 

Learning Objectives

LO1 Define what is meant by a ‘dropped object’

LO2 Identify the common causes of dropped objects and their consequences and explain the importance of eliminating, or reducing the risk of, incidents occurring 

LO3 Identify the duties of employers and employees in eliminating dropped object incidents 

LO4 Identify areas with a high potential for injury to personnel should a dropped object incident occur

LO5 Identify examples of bad practice

LO6 Describe the measures that should be taken to control the risk of falling objects

 

Course code: DOM-001
Course type: E-learning course
Duration: 1 hour
Language: Norwegian and English
Price: NOK 850,-

This course relates to how best practice, your attitudes, behavior and knowledge can prevent dropped objects and enhance the safety of you and your colleagues.

The content of this course is in compliance with Working Together for Safety’ handbook; Best practice - Dropped object Prevention. The course is developed by the same personnel who also developed collaboration for safety's handbook, Best practice - Dropped object Prevention, under the auspices of Equinor, a team with decades of experience within prevention, identification and controlling of dropped objects throughout the oil and gas industry.


Course Content
- Securing devices
- Securing of tools
- Securing of equipment
- Inspection, observation and follow-up checks


Contact BLH-DOM Safety Solutions AS for more information:
Tel.: +47 51 81 40 00
E-mail: post@blh-dom.com

Course code: MTP-033
Course type: E-learning course
Duration: 1 hour
Language: Norwegian, English
Price: NOK 1150,-

The purpose of the course is to prevent noise-induced hearing impairment. You will learn how loud sound and noise affect us. 

You will also learn how you can properly protect yourself against noise and why that is so important.

 

Course Content

- Demonstrate what it is like to have a hearing impairment

- Show how hearing damage may occur

- Explain the permanence of noise-induced hearing impairment

- Explain the link between exposure time and noise levels

- Show why it is important to use hearing protection and, not least, to use it correctly.

 

The course is based on the current rules and regulations for working in areas where there is a risk of being exposed to noise that may be damaging to health.

Course code: MTP-016
Course type: E-learning course
Duration: 4 hours
Language: English, Polish, Norwe ...
Price: NOK 1300,-

The e-learning course, “Fire Prevention during Hot Work”, has been quality controlled by the Norwegian Fire Prevention Association and designed is to satisfy the requirements set by the insurance industry.

The course aims to reduce the number of fires caused by hot work and improve knowledge about the risk of fire during hot work.

Please Note! Before we can inform the Norwegian Fire Prevention Association that you have completed the course, we must receive within 3 months of completing the e-learning a confirmation that you have received fire extinguishing training during the last two years. Please send the proof of the practical training to: learningcentre@mintra.com.


Participants who pass the course will be issued a certificate from the Norwegian Fire Prevention Association. The certificate must be renewed every 5 years.

 

All certificates will by default be sent in a digital app to a mobile phone number, no longer a plastic card.  The digital certificate is included in the course fee.
If a plastic card is required, an extra fee at NOK 450 will be added to the course fee to cover our cost.

 

You will be required to confirm your identity online before starting this course. In Trainingportal, we have implemented a fully automated process to make this a quick and painless experience.

 

 

 

Course Contents

The course focuses on duties and responsibilities during hot work and is divided into the following topics: 

- Hot work
- Regulations
- Fire theory
- Extinguishing fires
- Dangers of hot work
- Risk identification and preventive measures
- Documentation of safety
- If a fire starts

 

Course code: MUK-007
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: GBP 40,-

Course goal: To increase learners’ awareness of the risks of hand-arm vibration and the effects that it can cause. The course also looks at the control measures that should be taken to reduce exposure to vibration, based on industry best practice.

Target Audience: All onshore and offshore personnel that use vibration-inducing equipment.

Learning Objectives
LO1 Describe hand-arm vibration and the effects it can cause
LO2 Explain what Hand Arm Vibration Syndrome (HAVS) is and how to identify its early symptoms
LO3 Identify the types of jobs and equipment that are most likely to involve hand-arm vibration and expose workers to the risk of health effects
LO4 Explain the duties of employers under the Control of Vibration at Work Regulations
LO5 Outline the measures that employees can take to reduce the risk of HAVS
LO6 Outline the duties of equipment manufacturers and suppliers in reducing vibration risks
LO7 Describe the process of assessing the vibration risk to employees in accordance with the Exposure Action Value (EAV) and Exposure Limit Value (ELV)
LO8 Describe the control measures that should be taken to reduce exposure to vibration
LO9 Explain the importance of monitoring exposure to vibration, and health surveillance
LO10 Explain the importance of information and training in reducing the risks to health from vibration

Course code: MTP-059
Course type: E-learning course
Duration: 25 minutes
Language: English, Norwegian
Price: NOK 500,-

Who is this course for?
All employees.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
The course will make you aware of aspects relating to anti-corruption and anti-bribery and will familiarize you with the relevant legislation. During the course you will encounter common dilemmas where you will be asked to make your own decisions. The feedback in the exercises will enable you to handle various questions and tricky situations.

How will this course benefit my company?
By ensuring you are aware of aspects relating to anti-corruption and anti-bribery.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-021
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring knowledge or awareness of HAZID.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide all personnel with solid hazard identification awareness to enable them to evaluate hazards quickly and effectively so that they can carry out their duties as safely as possible. 

 

How will this course benefit my company?

By ensuring you are able to evaluate hazards quickly and effectively so that you can carry out your duties as safely as possible. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: RV-COR2
Course type: E-learning course
Duration: 9 Minutes
Language: English
Price: GBP 0,-
Course code: MTP-063
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 1150,-

Who is this course for?

Everyone working on low and high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

 

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MUK-009
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: GBP 40,-

Course goal: This course aims to give offshore personnel the knowledge required to understand the hazards and controls associated with noise in the workplace.

Target Audience: All personnel who could potentially be exposed to noise in the workplace on offshore installations

Learning Objectives:

LO1 Describe what noise-induced hearing loss is, and identify the early warning signs and symptoms to look out for
LO2 Explain the workings of the human ear, how noise exposure causes damage, and the effects of such damage
LO3 Explain the responsibilities and duties of employers and employees under current legislation
LO4 Explain how noise is measured and identify the noise levels above which employers should take action to reduce exposure
LO5 Explain the risk assessment requirements
LO6 Identify the control measures that should be taken to reduce exposure to noise
LO7 Explain the requirements for hearing protection; how to use the different methods of hearing protection and the importance of maintaining hearing protection
LO8 Explain the importance of health surveillance

Course code: MTP-055
Course type: E-learning course
Duration: 45 minutes
Language: English, Norwegian
Price: NOK 500,-

Who is this course for:
Primary target group are candidates for instructed person. Secondary target group are employees with HSE responsibilities.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
The course covers the government requirements on theoretical training for personnel who may undertake simple operational and maintenance tasks on the electrical system.
The course focuses on preventing accidents and to be aware of the dangers of working with electricity.
The theoretical part of First Aid and instructions are covered, but it is necessary to undertake practical training both in First Aid and the work tasks covered by the instructions in relation to the electrical installation where you are to work.

How will this course benefit my company?
By ensuring you have the knowledge of the government requirements of theoretical training for personnel who may undertake simple operational and maintenance tasks on the electrical system.

What standards are referred to in this course?
Internkontrollforskriften
Forskrift om elektroforetak og kvalifikasjonskrav for arbeid knyttet til elektriske anlegg og elektrisk utstyr (FEK)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hits per page
| 1 ... |