Renewables

Course catalogue

hits
198
Course code: MTP-061
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian
Price: NOK 500,-

Who is this course for?

Personnel at all levels within an organisation to establish a common benchmark of awareness.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

The Code of Conduct course provides an overview of the common values that govern responsible corporate practice and personal behaviour in a company. The course will identify the responsibilities of employees and our common responsibilities toward each other in the workplace. You will learn about applicable laws on human rights, equality, discrimination and corruption. During the course, you will be asked to make your own decisions in relevant dilemmas involving sexual harassment, bullying, discrimination and corruption.

 

How will this course benefit my company?

By ensuring you are aware of the common values that goven responsible corporate practice and personal behaviour in a company.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: NI-001
Course type: E-learning course
Duration: 15 hours
Language: Norwegian / English
Price: NOK 5300,-

Obligatory working environment training for safety deputies and union officials, completed as e-learning combined with classroom training. 

The course provides basic working environment training in accordance with the main contract between The Norwegian Confederation of Trade Unions (LO) and The Confederation of Norwegian Enterprise (NHO).

 

Course Content

E-learning

Interactive exercise sequences, video clips, and animations are used to illustrate the topics.

The course provides insight into why HSE work is important, using The Working Environment Act as a tool.

Knowledge of roles and responsibilities in relation to the working environment.

Using systematic methods for improving the working environment and for solving working environment issues.

 

Classroom Training

This internal company gathering can be conducted and organised by the company itself, or in collaboration with Mintra/The Federation of Norwegian Industries. If you would like Mintra/The Federation of Norwegian Industries to conduct the training, a minimum of 10 people must be enrolled.

 

If your company would prefer to conduct the training, relating content to internal routines and conditions, Mintra will contribute with documentation and information that describe activities related to this training. 

Contact us to find a suitable implementation model!

Course code: MTP-006
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 1400,-

Health, Safety and Environment (HSE) considerations are vital to every enterprise. Moreover, HSE requirements in the workplace are laid down in a whole range of laws, regulations and guidelines. The employer has the primary responsibility for providing a suitable, safe working environment – and for ensuring sufficient training. This “HSE Introduction” provides you with the basic knowledge you need to know to be able to deal with HSE challenges in your daily work.

Content:

Introduction to HSE - duration ca. 35 minutes.
Health - duration ca.  55 minutes.
Environment - duration ca. 15 minutes.
Safety - duration ca. 25 minutes.

The modules may be completed in any order. If you close the course window, it will reopen on the same page next time. After completing all the modules, you must pass the final test to have your course completion approved.

Course code: MTP-064-FT
Course type: E-learning course
Duration: 120 minutes
Language: English, Norwegian
Price: NOK 700,-

Who is this course for?

Everyone working on low voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low voltage installations.

 

What standards are referred to in this course?

§ 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE".

 

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-067
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian
Price: NOK 400,-

Who is this course for?
Key employees (IT and HR staff, board members)

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course is designed to raise the awareness how organisations, and all employees in contact with personal data are affected by GDPR Legislation (2018).

The course gives an overview of definitions, roles and responsibilities, the rights of individuals and the obligations of businesses with respect to the regulation.

We examine the territorial scope and outline the general requirements, technical solutions and administrative routines required for GDPR compliance, whilst also examining how to handle the issues sourrounding a data breach, should it occur.

The course content is developed in cooperation with Advokatfirmaet Schjødt AS.

How will this course benefit my company?
By ensuring you have the awareness of how organisations, and all employees in contact with personal data are affected by GDPR Legislation (2018).

What standards are referred to in this course?
EU's General Data Protection Regulation - GDPR (2018)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-062
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian
Price: NOK 500,-

Who is this course for?

Personnel at all levels within an organisation to establish a common benchmark of awareness.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course provides an overview of common corporate sustainability approaches and identifies the social, environmental and corporate governance aspects that should be considered during business operations. The course also identifies the human rights that are at risk of infringement in the work environment, and you will be aware of the global presence of modern-day slavery. During the course, you will be asked to make your own decisions in relevant dilemmas involving environmental criminality, corruption and breaches of labour rights.

 

How will this course benefit my company?

By ensuring you are aware of the common corporate sustainability approaches and identifies the social, environmental and corporate governance aspects that should be considered during business operations.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: Endur-AAK-007
Course type: E-learning course
Duration: 40 minutes
Language: English, Norwegian
Price: NOK 1000,-

This course focuses on prevention of Dropped Objects and employs Samarbeid for Sikkerhet latest revision of the handbook, recommendation 024 (revision 4. 2018) as normative. 

Through increased understanding of the term Dropped Objects, the use of practical tools, aids and methods, the intention is for course participants to be more observant about dropped objects in their daily work. 

This revision was released on the 24.02.20. 

 

Course content: 

- Dropped Objects tools
- Dropped Objects categories
- Observation techniques 
- Barriers 
- How to improve Dropped Objects findings

 

Contact details: 

Please contact Endúr Aak for more information: 

T: 911 60 800 
E-mail: aak@endur.no
Contact person: Steffen Kalsaas 

Course code: NI-020
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian / english
Price: NOK 400,-

The course covers the following topics:

- What is psychosocial working environment?
- Characteristics of good and poor psychosocial environment
- Roles and responsibilities
- Prevention

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Course code: MTP-064
Course type: E-learning course
Duration: 120 minutes
Language: English, Norwegian
Price: NOK 700,-

Who is this course for?

Everyone working on low voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low voltage installations.

 

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: APP-001
Course type: E-learning course
Duration: 7 hours
Language: Norwegian
Price: NOK 4200,-

This course looks at electrical installations in explosive atmospheres. The object of the course is to enable those working in explosive atmospheres to perform their work properly and safely.


This course fulfils the requirements for personnel working in explosive atmospheres. Theory is taken from CENELEC and IEC norms.


Text, images, videos, animations and 3D simulations will help give you a better understanding of explosive atmospheres and their particular characteristics.

Course code: MTP-002
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian
Price: NOK 1050,-

Who is the course for?

All personnel, offshore and on land who require knowledge on waste management.

Is previous experience required?

No previous experience is required.

How will the course benefit me? To be able to manage waste properly, it is important that all employees know the laws and regulations that apply in this area. Waste Management is our joint responsibility!

How will the course benefit my company?

To be able to manage waste properly, it is important that all employees know the laws and regulations that apply in this area.

What standards are referenced in the course?

The Waste Regulations, The Control Regulations and The Pollution Control Act

The ISO 14000 series

EMAS (Eco-Management and Audit Scheme)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-018
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Who is this course for?

This course is aimed towards all personnel who use abrasive wheels in the workplace.


Is previous experience required?

No previous experience is required to complete this course.


How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.


How will this course benefit my company?

The course will benefit companies by providing personnel with knowledge of how to avoid risks and hazards when using abrasive wheels, subsequently reducing accidents and injuries in the workplace.


What standards are referred to in this course? 

• Provision and Use of Work Equipment Regulations (PUWER) 


Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: NI-010
Course type: E-learning course
Duration: 5 hours
Language: Norwegian / English
Price: NOK 2900,-

The Working Environment Act, section 3-5, obligates employers and executives to complete HSE training. This course satisfies the requirements for HSE training for executives and managers.

The course contains the following modules: 

• A working life changing

• The Working Environment Act

• Risk Managament

• Healthy enough to work?

• Systematic HSE work

 

Course code: RV-COR1
Course type: E-learning course
Duration: 7 Minutes
Language: English
Price: GBP 0,-
Course code: MUK-160
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Who is this course for?

Personnel requiring an awareness or understanding of the change management process.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of management of change. The course focuses on the steps of the management of change process, the roles and responsibilities of personnel, and the risks involved in change management and their associated control measures.

 

How will this course benefit my company?

By ensuring you have an overview of the management of change process.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-038
Course type: E-learning course
Duration: 45 minutes
Language: English, Norwegian
Price: NOK 1100,-

Who is this course for?

All employees at all levels of the organisation.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

Insufficient understanding of risk often leads to delayed projects, accidents and other unwanted incidents.

This course provides a basic understanding of what risk is, how it can be managed and how understanding risk helps us make better decisions.

 

How will this course benefit my company?

By ensuring you are aware and have a basic understanding of what risk is and how to manage risk. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

There is no exam upon completion of this course.

Course code: MUK-189
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

 

Learning Objectives

- Explain what is meant by the term ‘Abrasive Wheel’

- Describe typical regulatory requirements for abrasive wheels

- Give examples of different types of abrasive wheels

- Explain how abrasive wheels operate

- Explain the importance of using guards during grinding operations

- Explain the requirements for portable and hand-held grinding machines

- Explain the main hazards of grinding operations

- Give examples of common problems faced when using abrasive wheels

- Explain what the PPE requirements are during grinding operations

- Identify the safety measures that must be in place during grinding operations

 

Course code: MTP-075
Course type: E-learning course
Duration: 40 Minutes
Language: English (US)
Price: GBP 40,-

This course aims to provide an overview of US best practice in relation to drug and alcohol awareness in the workplace.

This course provides drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs. It is designed to enable you to:

• Identify various types of common drugs

• Be familiar with drug and alcohol laws and regulations

• Find company policies on alcohol and controlled substances

• Explain the various methods of alcohol and drug testing routinely used in the workplace

 

Course code: APP-012
Course type: E-learning course
Duration: 1 hour
Language: Norwegian
Price: NOK 990,-

“Course on fall protection” is a course on the basics of fall protection for anyone working above ground.

This course outlines the laws and regulations related to fall protection. It contains information about active as well as passive protection gear, as well as first aid related to falls from a height. Upon completion of the course one will have information about the various aspects of fall protection. One will also learn how to carry out ones work in a safe and secure manner within the confines of the applicable laws and regulations.

 

Course Content

- Laws and regulations

- Active and passive fall protection

- First aid

Course code: MTP-024
Course type: E-learning course
Duration: 1 hour
Language: Norwegian
Price: NOK 500,-

This course provides an introduction to emergency first aid. After completing the course, users will feel secure enough in their knowledge to be able to take action in an accident situation by analyzing the situation and understanding the order in which to do what needs to be done.

 

Course Content

- Introduction

- Lifesaving first aid
- To call for help
- The important survey
- Stroke
- Cardiac Resuscitation
- Heart Disease
- Internal and external bleeding

Hits per page