Olje og gass

Kurskatalog

treff
319
Kurskode: MUK-136
Kurstype: E-læringskurs
Varighet: 15 Minutter
Språk: Engelsk
Pris: NOK 500,-

Hensikten med kurset er å gi en oversikt over de sikkerhetsregler som må tas når du arbeider med elektrisk utstyr.

 

Etter fullført kurs skal brukeren kunne:
- Betydningen av elektriske sikkerhetsregler
- Lover og regler for å forebygge skader fra elektrisitet på arbeidsplassen
- Felles terminologi for elsikkerhet
- Generelle forholdsregler og sikkerhetsprosedyrer som skal følges når du jobber med elektrisk utstyr
- Valg av riktig personlig verneutstyr som skal brukes til spesifikke elektriske oppgaver
- Iverksette tiltak i tilfelle en nødssituasjon

 

Kurset er kun tilgjengelig på engelsk. 

Kurskode: MUK-208
Kurstype: E-læringskurs
Varighet: 20 minutter
Språk: Engelsk (US)
Pris: NOK 500,-

Course Goal:

This course aims to provide personnel with an overview of US best practice in relation to the different types of respiratory protection used in the workplace.

 

Learning Objectives:

LO1 Explain what is meant by Respiratory Protective Equipment (RPE)

LO2 Give an overview of the relevant regulations governing the use of RPE 

LO3 Identify the different types of RPE 

LO4 Explain the requirements for respirator fit testing

LO5 Describe the importance of filters when using RPE

LO6 Demonstrate how to correctly select RPE

LO7 Describe the factors to consider when wearing RPE

LO8 Explain the importance of correctly maintaining, cleaning, storing and inspecting RPE

 

Kurset er kun tilgjengelig på engelsk.

Kurskode: APP-010
Kurstype: E-læringskurs
Varighet: 3 timer
Språk: Polsk
Pris: NOK 650,-

I § 7 i ”Forskrift om sikkerhet ved arbeid i og drift av elektriske anlegg – FSE” er det satt krav til at relevant personell skal gis årlig opplæring og instruksjon innen FSE. Gjennom dette e-læringskurset gjennomgår du kravene i forskriften slik at du får opplæring og instruksjon i FSE. Kurset fokuserer på sikkerhet ved arbeid i lavspenningsanlegg offshore.

 

Kurset gir også opplæring og instruksjon innen førstehjelp, med unntak av hjerte-lungeredning. I henhold til § 7 i FSE, skal opplæring i FSE og førstehjelp gjennomføres minst en gang i året.

 

For å imøtekomme kravet om å kunne yte førstehjelp ved strømulykker, må man årlig gjennomføre en praktisk øvelse i HLR (munn- til munn og hjertekompresjon).

 

Kurset består av ulike temaer som inneholder informasjon om både forebygging av el-ulykker og rutiner ved ulykker, samt teoretisk førstehjelp. Det skal bidra til å unngå skader på mennesker, utstyr og anlegg.

 

Kurskode: MUK-210-FT
Kurstype: E-læringskurs
Varighet: 35 minutter
Språk: Engelsk (US)
Pris: NOK 500,-

Course Goal:

This course provides learners with an awareness of US best practice in relation to working at height and fall protection.

 

Learning Objectives:

 

LO1 Identify when fall protection is required

LO2 Identify the legislative and regulatory requirements for fall protection that help to control work at height

LO3 Explain the duties that are placed on employers and employees

LO4 Describe the hazards involved in working at height

LO5 Explain the importance of planning and risk assessment

LO6 Describe the hierarchy of control for managing and selecting fall protection equipment 

LO7 Identify the factors that should be considered when assessing fall protection methods

LO8 Describe the main methods of access for working at height and give examples of the different types of fall protection equipment

LO9 Describe the rules for working with ladders

LO10 Describe the rules for working with scaffolds

LO11 Explain the importance of inspecting equipment

LO12 Explain how to correctly use a safety harness

 

Kurset er kun tilgjengelig på engelsk.

Kurskode: MUK-223
Kurstype: E-læringskurs
Varighet: 45 minutter
Språk: Engelsk (US)
Pris: NOK 500,-

Who is this course for?

All personnel involved in forklift activities.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of the hazards specific to forklift activities. 

 

How will this course benefit my company?

By ensuring you have an overview of the hazards specific to forklift activities. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Kurskode: MUK-218
Kurstype: E-læringskurs
Varighet: 30 minutes
Språk: Engelsk (US)
Pris: NOK 500,-

Course Goal:

This course aims to  provide learners with an overview of US best practice in relation to working with hand and power tools.

This course aims to provide an understanding of the potential hazards associated with the use of hand tools and power tools, as well as the safety precautions required to prevent those hazards from occurring.

 

Learning Objectives:

LO1 Identify the general hazards and control measures associated with hand and power tools

LO2 Identify specific hazards associated with hand tools

LO3 Give an overview of general power tool safety precautions

LO4 Explain how guards provide protection to operators

LO5 Give examples of tools that must be equipped with a momentary switch

LO6 Identify specific hazards and control measures related to the use of electric tools

LO7 Identify the proper procedures to follow when using a grinder

LO8 Identify specific hazards and control measures related to the use of pneumatic tools

LO9 Identify specific hazards and control measures related to the use of powder-actuated tools

LO10  Identify specific hazards and control measures related to the use of hydraulic jacks

 

Kurset er kun tilgjengelig på engelsk.

Kurskode: MUK-003
Kurstype: E-læringskurs
Varighet: 45 minutes
Språk: English (Latin America ...
Pris: NOK 500,-

Este curso está diseñado para brindarle al personal costa afuera un conocimiento general sobre los peligros y medidas de control que se relacionan con las áreas de trabajo de la instalación en las que puede estar presente el H2S.

• Comprender mejor los peligros que se relacionan con el H2S y las medidas necesarias de detección y protección que deben tenerse y cumplirse

• Identificar los niveles y límites de exposición laboral legales que se han establecido para su protección.

• Explicar las responsabilidades de los empleadores en lo que respecta a la gestión de riesgos asociados a la posible exposición al H2S en el lugar de trabajo.

• Explicar las tareas de los empleados respecto de cumplir con los procedimientos pertinentes sobre H2S y seguir las pautas que proporcionan los empleadores o propietarios de las instalaciones.

Kurskode: LSI-001
Kurstype: E-læringskurs
Varighet: 1 time
Språk: Engelsk
Pris: NOK 650,-

Målsettingen med dette kurset er at personell som skal bruke arbeidsutstyr, og er involvert i arbeidsoperasjoner, skal få god kunnskap om HMS ved bruk av arbeidsutstyr. Kurset omhandler krav til personell, roller og ansvar, i tillegg til ulykker og regelverk om sikkerhet.

 

Kurset forutsetter at det gjennomføres praktisk opplæring på aktuelt arbeidsutstyr i tillegg.

 

Kurset omhandler følgende emner:

 

• Arbeidsutstyr generelt

• Bruk av arbeidsutstyr

• Valg av arbeidsutstyr

• Opplæring i bruk av arbeidsutstyr

• Arbeidsområder og krav til personell

• Risikovurdering

• HMS, ulykker og ansvar

• Direkte og bakenforliggende årsaker til ulykker

• Aktuelle lover og forskrifter

 

Kurset inneholder øvingsoppgaver, og avsluttende test med 30 spørsmål.

Kurskode: MUK-178
Kurstype: E-læringskurs
Varighet: 30 minutter
Språk: Engelsk
Pris: NOK 500,-

Who is this course for?

Personnel who work with pumps in the Oil & Gas industry.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of the various types of pumps used in the Oil and Gas Industry.

 

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel who work with pumps have an overview of each type and how they work.

 

What standards are referred to in this course?

No standards or regulations are referenced in this course.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Kurskode: MUK-116
Kurstype: E-læringskurs
Varighet: 15 minutter
Språk: Engelsk
Pris: NOK 500,-

Who is this course for?

Personnel requiring an awareness or understanding of common handling and storage methods for chemicals.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of the requirements for the handling and storage of hazardous substances

 

How will this course benefit my company?

By ensuring you have an overview of the requirements for the handling and storage of hazardous substances

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

 

Kurset er kun tilgjengelig på engelsk. 

Kurskode: PRO-002
Kurstype: E-læringskurs
Varighet: 3-5 timer
Språk: Norsk
Pris: NOK 1900,-

Vi gransker og undersøker for å lære, iverksette forebyggende tiltak og forhindre gjentakelse av uønskede hendelser. Å granske en hendelse er som å skrelle en løk. Vi starter med de direkte årsakene som er de mest synlige. For å komme til bunns i hendelsene må vi avdekke "lag på lag" hvilke andre årsaker som ligger bak. Den teknologiske utviklingen, og ikke minst nye organisasjonsformer, fører til at kompleksiteten øker og det blir vanskeligere å forstå sammenhengen mellom hendelsen og de bakenforliggende årsakene til hendelsen. Dette kurset presenterer metode, organisering og prosess for gjennomføring av granskinger. Kurset kan også tilbys i kombinasjon med dagssamling.


KURSINNHOLD

• Beskrivelse og klassifisering av hendelser

• Organisering av en gransking

• Innsamling og sikring av informasjon

• Taps-årsaksmodellen

• MTO-modellen

• STEP-modellen

• Rapportering og oppfølging

 

HVORDAN ER DETTE KURSET TIL NYTTE FOR MEG, OG FOR MIN BEDRIFT?

Etter avsluttet modul skal deltakerne forstå hva gransking er og kunne de ulike trinnene i en granskingsprosess. Deltakerne vil også få kunnskaper om hvordan gransking ledes og gjennomføres i praksis.


Kurstilbyder: Proactima

Kurskode: MUK-171
Kurstype: E-læringskurs
Varighet: 30 minutter
Språk: Engelsk
Pris: NOK 500,-

Who is this course for?

Oil and Gas Operations Technicians

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

This course aims to provide an overview of wireline equipment and its operation

 

How will this course benefit my company?

To ensure you have an overview of wireline equipment and its operation

 

What standards are referred to in this course?

The course is made according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Kurskode: MUK-183
Kurstype: E-læringskurs
Varighet: 30 minutter
Språk: Engelsk
Pris: NOK 500,-

Kurset er kun tilgjengelig på engelsk.


Course Goal:
 This course aims toprovide learners with an overview of industry best practice associated with pressure vessel inspection

 

Learning Objectives:

LO1 Define what is meant by a ‘pressure vessel’

LO2 Give examples of pressure vessels

LO3 Identify the factors that can cause pressure vessel incidents

LO4 Identify the hazards posed by pressure vessel failure

LO5 Explain the requirements for inspections to be carried out by a competent person

LO6 Explain the requirements for a written scheme of examination

LO7 Describe how to carry out internal and external pressure vessel inspection

LO8 Describe how to carry out pressure pipework inspection

LO9 Explain the importance of carrying out regular pressure testing

 

LO10 Describe the control measures that are required to limit the risk posed by pressure vessels

Kurskode: IMIST-003
Kurstype: E-læringskurs
Varighet: 300 minutter
Språk: Latin American Spanish
Pris: USD 99,-

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

 

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

 

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable .

 

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

 

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

 

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.

 

 

Kurskode: BVS-017
Kurstype: E-læringskurs
Varighet: 1 hour
Språk: English
Pris: EUR 200,-

Presentation

This training course aims at providing a general description of the requirements for the prevention of pollution by sewage from ships as defined by the Annex IV of the MARPOL Convention.

Objectives

On completion of the training, students will be able to:

Understand the MARPOL requirements for prevention of sewage pollution from ships.

Know the various sewage treatment systems which are accepted by the MARPOL Convention.

Know the equipment required on board different ship types.

Understand the criteria defined in the convention for the control of discharge of sewage.

Understand the requirements for survey and certification of ships.

Program

Introduction

Applicability

Definitions

Equipment

Types of sewage systems

Sewage treatment plant

Holding tank

Sewage comminuting and disinfecting system

Standard discharge connection

The special case of livestock carriers

Discharge criteria

Discharge of sewage from ships other than passenger ships

Discharge of sewage from passenger ships outside special areas

Discharge of sewage from passenger ships within a special area

Survey and certification

International Sewage Pollution Prevention Certificate

Certificate entries: Number of persons the ship is certified to carry; New or existing ship; 

New or existing passenger ship for the application of Regulation 11.3

Survey requirements

Type Approval Certificate for sewage treatment plants

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of MARPOL Sewage Pollution, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of MARPOL Sewage Pollution is obtained after completion of the course and passing the online test.

Kurskode: EBA-004
Kurstype: E-læringskurs
Varighet: 1 time 40 minutter
Språk: Norsk, Engelsk, Polsk
Pris: NOK 650,-

Kurset tilfredsstiller, sammen med en praktisk øvelse, forskriftskrav om dokumentert sikkerhtsopplæring av de aktuelle verktøyene. 

Kurset gir kunnskaper om oppbygging, betjening, bruksegenskaper og bruksområde, samt vedlikehold og kontroll av de aktuelle vertkøyene. Opplæringen gir kunnskaper om de krav som stilles til sikker bruk og betjening i forskrifter og i bruksanvisning.

Kurset er delt opp i en innledning og egen kursdel per verktøy. Gjennomføringen kan deles opp. Ta gjerne 1-2 verktøy om gangen med en pause i mellom. 

Kurset omhandler følgende emner:

- Innledning til generell HMS
- Vinkelsliper
- Bor-, pigg- og kombihammer
- Boltepistol
- Spikerpistol
- Bladsag (inkluderer bygningssag, kapp- og gjærsag, sirkelsag, stikksag og bajonettsag)
- Kjedesag

Kurskode: PRO-031
Kurstype: E-læringskurs
Varighet: 4-6 timer
Språk: Norsk
Pris: NOK 2900,-

Proaktiv beredskapsledelse innebærer å identifisere tiltak som kan styre utviklingen i ønsket retning og iverksette tiltak før omstendighetene tvinger en til å gjøre det.
Dette kurset er første steg på veien til å kunne håndtere slike situasjoner og dermed delta i 2. eller 3. linje beredskapsorganisasjon på land.

 

Kurset omfatter følgende hovedområder:

• Introduksjon

• Definerte Fare- og Ulykkessituasjoner

• Eksterne ressurser og aktører

• Ressurser og aktører

• Oppbygging og bruk av beredskapsplanverket

• Opplæring, trening og øvelser

• Evaluering og forbedring

• Stressreaksjoner under arbeid i en beredskapsorganisasjon

 

Målgruppe:
Målgruppe er all personell som skal delta i 2. eller 3. linje beredskapsarbeid i selskapet.

 

Læringsform:
E-læring. Det anbefales at e-læringskurset følges opp med samling, trening og øvelser. Ta kontakt med kurstilbyder Proactima for et bedriftstilpasset tilbud.

Kurskode: MUK-163
Kurstype: E-læringskurs
Varighet: 30 minutter
Språk: Engelsk
Pris: NOK 500,-

Who is this course for?

Oil and Gas Operations Technicians

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

This course aims to provide an overview of coiled tubing equipment and its operation

 

How will this course benefit my company?

To ensure you have an overview of coiled tubing equipment and its operation

 

What standards are referred to in this course?

This course is made according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Kurskode: MUK-205
Kurstype: E-læringskurs
Varighet: 30 minutes
Språk: Engelsk (US)
Pris: NOK 500,-

Course goal:

This course aims to provide learners with an awareness of US best practice in relation to manual handling activities.

To increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to give an overview of the OSHA requirements for the correct handling techniques for safe lifting, and for the pushing and pulling of loads.

 

Learning Objectives

LO1 Define the term ‘manual handling’ and explain the importance of safe manual handling operations 

LO2 Identify the types of injuries that may result from improper manual handling operations 

LO3 Identify safe work practices in relation to manual handling operations

LO4 Describe the duties that are placed on employers and individual personnel in relation to manual handling operations

LO5 Explain the importance of risk assessing manual handling operations 

LO6 Identify the factors to consider when assessing manual handling operations and identify ways of reducing the risks of injury 

LO7 Describe good handling techniques for safe lifting

LO8 Describe good handling techniques for pushing and pulling loads

LO9 Explain the training requirements associated with manual handling operations

 

Kurset er kun tilgjengelig på engelsk.

Kurskode: MUK-063
Kurstype: E-læringskurs
Varighet: 30 minutter
Språk: Engelsk
Pris: NOK 500,-

Who is this course for?

Personnel who require an awareness and understanding of methods of oil and gas recovery.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with an introduction to oil and gas recovery methods

 

How will this course benefit my company?

By ensuring you are introduced to the various ways oil and gas are recovered from the well.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Treff per side
| 1 ... 9 ... |