Course catalogue

This course combines self-study by e-learning and classroom training with demonstrations and examples which is useful when working in explosive atmospheres.

The course is suitable for personnel who should have an introduction in potentially explosive areas, marking, equipment, and requirements.

Participants will be introduced to the relevant parts of the NEK 420, IEC 60079 standard (NEK EN 60079-standards) as well as national adaptations where relevant.

Presentation

This training course describes the various elements of the ship's structure, the loads acting on the structure and the required strength of the ship's structure to sustain such loads.

Objectives

On completion of the training, students will be able to:

Know the typical structural arrangements of different ship types. Understand stiffened panels as the fundamental structural units in ship structures and know the different framing systems used in ship construction

Know the different types of loads acting on the ship's structure and understand the static sea pressure and the wave induced dynamic sea pressure. Understand the concept of net loading on the ship's structure, shear forces and bending moments. Get familiar with fatigue loads

Understand the stresses on ship's structure including longitudinal stresses on hull girder, stresses on primary supporting structure and local stresses and the strength of the ships structure. Get familiar with fatigue strength and understand the corrosion and the net scantling approach.

Program

Module 1 – Elements of Ship Structure

Main ship types

Materials used in shipbuilding

Structural elements: Plating, profiles, stiffened panels, midship section, web frame

Framing systems: Longitudinal framing, mixed framing, transverse framing

Breakdown of ship structures: Double bottom, side shell, deck, bulkheads, engine room structure, peak tanks

Module 2 – Loads on Ship Structure

Classification of loads acting on ship structure

Static and dynamic loads

Sea pressure

Internal loads

Net load on structure

Bending moment and shear force

Alternate loading condition

Module 3 – Strength of Ship Structure

Ship structural strength

Stress classification

Spreading of loads through the ships structure

Hull girder strength

Strength of primary structure

Finite element modelling analysis

Strength of plates and stiffeners: Stress check, section modulus, buckling strength

Fatigue strength

Corrosion of ship's structure, consequences of general corrosion

Net scantling approach

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Ship's Structure Fundamentals, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Ship's Structure Fundamentals is obtained after completing the course and passing the online test.

Mentoring is a process that follows coaching. Coaching makes a person equipped with the skills required for a job whereas mentoring is on-the-job process. It helps a person practice the skills learned, enhance the skills, and learn new skills to be future ready. Hence, coaching is a short-term relationship whereas mentoring is a long-term. Coaching is always task oriented whereas mentoring is relationship oriented. It is all about reaching a stage where the mentor can easily share the real issues influencing the trainee. On the other hand, coaching can be implemented immediately on any particular topic. This course will help you acknowledge the difference between coaching and mentoring and make you learn when to use them.

• List the differences between coaching and mentoring 

• Identify the requirements that are suitable for coaching and mentoring

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i den digitale notatblokken OneNote 2016. En kombinasjon av videoer, teori, eksempler, oppskrifter og tester gjør det enkelt å lære seg de nye funksjonene og verktøyene. E-læringskurset inneholder 52 opplæringsvideoer.

E-læringskurset er tilpasset Office 365.

Testene i e-læringskurset måler kunnskap før, under og etter opplæringen. Når ettertesten er bestått får du tilgang til et kursbevis i PDF-format som enkelt kan lagres eller skrives ut.

Innhold:

- Før du starter

- Notater

- Innholdselementer

- Outlook

- Søking

- Delte notatblokker

- Mobilappen

Presentation

This training course composed of 2 modules provides an overview of the requirements of the Ballast Water Management International Convention and the technical aspects related to the ballast water treatment equipment.

Objectives

On completion of the training, students will be able to:

Understand the background of the Ballast Water Management Convention, its structure and the most important regulations

Know the difference between the ballast water exchange and the performance standards

Understand the role of all stakeholders and actors

Be familiar with the approval, inspections, commissioning and tests of Ballast Water

Management systems

Understand the survey and certification requirements

Be familiar with the different technologies used and the installation requirements

Program

Module 1 – BWM Regulatory Aspects

Background

The Ballast Water Management Convention

Duties of the main stakeholders 

Ballast Water Management Standards

USCG Position 

Module 2 – BWM Technical Aspects

BWM Surveys

International Ballast Water Management Certificate

BWM System Approval

Sampling

Ballast water treatment systems technologies

Ballast water treatment systems installation

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Ballast Water Management, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Ballast Water Management is obtained after completion of the course and passing the online test. 

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i presentasjonsprogrammet PowerPoint 2016. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene og verktøyene. En komplett e-læring med både grunnleggende og videregående emner. E-læringskurset inneholder 82 opplæringsvideoer.

E-læringskurset er tilpasset Office 365.

Testene i e-læringskurset måler kunnskap før, under og etter opplæringen. Når ettertesten er bestått får du tilgang til et kursbevis i PDF-format som enkelt kan lagres eller skrives ut.

Innhold:

- Før du starter

- Utforming

- Tekst

- Bilder

- Figurer

- SmartArt-grafikk

- Diagram

- Tabeller

- Medier

- Framvisning

Objective: The purpose of the training is to provide personnel working with load securing with basic training in load securing and user control of load carriers.

The course satisfies the requirement for documented training in the Regulations on the performance of work best. no. 703, Norsok R-003N and NOG 116, and is carried out with theory and practice according to training plan O-2.6.

The course consists of 4 hours of theoretical e-learning and 16 hours of practical training in classrooms / practice rooms.

The practical training ends with a practical test to ensure that each participant has acquired sufficient knowledge of:

- Proper use of personal protective equipment
- User control of load carriers and assessment of whether it can be used
- Plan and carry out packing and securing of a given load
- Correct securing of the work area
- Choose the right load carrier
- Proper use of various load securing equipment

Content theory

- Introduction
- Unwanted events and non-conformance reporting
- Risk assessment
- Regulations, standards and NOG guidance
- Documentation
- Personal protective equipment
- Various load carriers, planning, user control and packaging
- Use and control of load securing equipment
- Theoretical exam

Practical exercises

- Use of personal protective equipment
- Implementation of user control
- Plan and carry out loading and securing of cargo
- Proper use of auxiliary tools
- Checklists
- Safety during work
- Use of barriers
- Practical exam

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i Outlook 2013. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene. E-læringskurset inneholder 43 opplærings-videoer.

Course Content

- Sending av meldinger 

- Behandling av meldinger 

- Kalender 

- Personer 

- Oppgaver og notater

Presentation 

This training course provides general information about welding of aluminium structures. It contains an introduction to aluminium properties and describe the main issues regarding weldability of aluminium and its alloys. 

Objectives 

On completion of the training, students will be able to: 

Know the properties of aluminium and its alloys comparing to steel 

Understand the issues regarding weldability of aluminium alloys 

Recognize the main problems that can arise during design and production of aluminium ship’s structures 

Know the suitable welding processes for joining of aluminium ship hull 

Understand the application of bimetallic joints. 

Program 

Properties of aluminium alloys 

o Specific properties 

o Heat treatable and non-heat treatable aluminium alloys 

o Marine aluminium alloys 

o Designation of aluminium alloys 

Weldability of aluminium 

o Characteristics of aluminium referring to welding 

o Main issues: gas porosity, oxide inclusions and lack of fusion, hot cracking, reduced 

strength in the weld and heat affected zone, distortion 

o Choice of filler material 

Welding processes for aluminium 

o MIG aluminium welding 

o TIG aluminium welding 

o Typical defects in aluminium welding 

Joining of steel and aluminium in shipbuilding 

o Bimetallic strip for transition joints 

Preparation and design of welds 

o Guidelines for aluminium joint design 

o Examples of joints 

o Application of backing 

o Defects caused by poor preparation 

o Recommendations for aluminium welding

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Aluminium Welding awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Aluminium Welding, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination. 

Leaders must focus on developing their ability to be more agile and strategic – within an environment of constant change. They should explore tools that can be leveraged to achieve the goal. Good agile leaders make sure that their teams identify the desired long-term goals, and then work backward from these to identify all the conditions that must be in place for the goals to occur.

• Define the theory of change and identify factors impacting the change

• Enlist 5 types of organizational change and successful ways to implement them

• Apply strategies which help in creating an organization that is always ready for change

Deltakerne vil få en god og sikker innføring i høytrykkstestingsutstyr, teori og praksis. Etter endt kurs skal deltakerne kunne bruke trykkstestingsutstyr på en sikker måte, slik at ulykker og skader unngås.

Hensikt:

Hensikt: Hensikten med innføringskurs i trykktesting er å gi den enkelte kursdeltager de grunnleggende kunnskaper om forberedelser, planlegging, utførelse og dokumentering av trykktesting som disiplin.

Innhold:

Svakheter i sammenføyninger og materialer

Omregningstabeller PSI - BAR

Hydrostatisk og Pneumatisk trykktesting

Sikkerhet ved trykktesting og fysiske barierer

HMS - Bruk av personlig verneutstyr

Generelle prosedyrer ved trykktesting / Eksempel

Fittings og høytrykkslanger - Trykklasser

Gjengetyper, flenser, ventiler, pakninger og bolter

Ulike metoder for trykktesting

Trykktestingsutstyr

Bruk av trykktestingsutstyr i praksis. Trykktesting

This course is only available in Norwegian.

The simplest definition of diversity is “a range or variety of different things”. In the context of D&I, diversity refers to “the traits and characteristics that make people unique” which include (but are not limited to) race, ethnicity, age, gender, socio-economic class, ability, sexual orientation, and nationality. The summation of these variables combine to create life experiences which shape how a person solves problems, creates, and assesses risk. These are examples of “diversity of thinking” which yields direct and indirect benefits that are foundational to the business case for investments in D&I initiatives.

An inclusive environment is one in which “all individuals are treated fairly and respectfully, feel welcome, have equal access to opportunities and resources, and can contribute fully to the organization’s success.”

• What are strategies to improve D&I initiatives?

• What is the business case for D&I?

• What are the gaps in the business case for D&I?

Teams are the backbone of contemporary business life. Executive teams, work teams, cross-functional teams, high-performance teams, and project teams serve a variety of purposes, but they all have the same goal: to solidify the organization’s competitive advantage in the marketplace. 

Cross-functional team leaders draw individuals from departments across the organization to address a particular problem. They might select development engineers, marketing professionals, sales people, legal experts, customer service managers, accountants, and HR executives to apply their various talents to accomplish the goal. The concept is powerful. But this mix of diverse skill sets, professional experience, and personalities also comes with challenges—and you need to manage the team carefully in order to maximize its potential for success.

• State the challenges of handling a diverse team 

• List the ways to manage these challenges 

• Apply the strategies to leverage the power of your team

The journey of a successful leader begins with both personal and professional development. Leaders stay on top of their industry and economy. They are future-focused, positive, and strong communicators. Leaders spend time in self-reflection and education, learning how to maximize their strengths and improve their weaknesses. They study best practices for working with others and know how to get the most out of their employees. They combine these knowledges to guide their organization. Leaders pursue goals persistently. They are open-minded and flexible in their approaches, encourage team members to embrace innovative thinking, and cultivate an environment of positive work culture. They develop team members through coaching, delegating, and mentoring. They also model and inculcate behaviors they want their employees to have, such as integrity, strong communication skills, innovation, emotional intelligence, strategic decision-making, confidence, and vision. Above all, a successful leader provides clarity of purpose, direction, and support, so that everyone succeeds as they work to achieve common goals.

• Demonstrate excellence in business strategy

• Apply essential personality characteristics

• Build critical people skills required to achieve goals

Presentation 

This training course provides a general introduction to dynamic positioning systems, which are computer-controlled systems that automatically maintain the vessel's position and heading by using their propellers and thrusters. 

Objectives 

On completion of the training, students will be able to: 

Get familiar with dynamic positioning systems. 

Know the main components of dynamic positioning systems, equipment used and installation. 

Know the Class requirements in terms of surveys and tests of dynamic positioning systems 

Program 

History 

Characteristics and scope of DP systems 

Applications 

Equipment class 

Classification notations 

System configuration: power system, thruster system, control system, position reference systems, computer system, display system 

Redundancy 

o Redundant systems 

o System failures 

o Redundancy concept 

o Terms 

o Single fault tolerance 

o FMEA 

Design environment 

Essential non-DP systems 

Performance analysis 

Operational requirements 

System components 

o Power system 

o Thruster system 

o DP control system 

o Position reference system: acoustical, taut-wire and other reference systems 

Scope of DP surveys 

o Inspections at works 

o Surveys during construction, tests and trials 

o Surveys during operation: Annual and Renewal surveys, operational test, Occasional surveys

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Introduction to DP System awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Introduction to DP System, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

Hensikten med opplæringen er å gi truckførere allsidig praktisk opplæring og øvelse i sikker bruk av truck, slik at ulykker i forbindelse med bruken unngås. Opplæringen skal gi fører så gode kjøreferdigheter at vedkommende selvstendig på en sikker måte skal kunne gjennomføre oppdrag med truck.

Truckfører må imidlertid gjennomføre typeopplæring på den trucken som til enhver tid benyttes i tillegg til sertifisert sikkerhetsopplæring. Opplæringen avsluttes med en praktisk prøve som innbefatter kontroll og bruk av aktuelle trucker.

Bestått praktisk prøve på aktuelle trucker vil være grunnlag for utstedelse av kompetansebevis for fører av truck

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser

Modul 2.2 (14 timer) Truck 

Modul 3.2 (6 timer) Praktisk bruk

Modul 4.2 Bedriftsoppl. - 20 timer Oppl.virksomhet-14 timer

The course is only available in Norwegian.

Your success as a leader isn’t dependent upon how much technical knowledge, business expertise, or years of industry experience you have. If you want to achieve goals consistently, build strong, collaborative teams, and establish solid relationships with colleagues, superiors, and clients, then you need Emotional Intelligence (EQ). Emotional Intelligence, also known as Emotional Quotient (EQ) is the ability to properly gauge your emotions as well as the emotions of others in all situations, use proper judgment and behave appropriately for the desired outcome. In other words, EQ is the ability to identify your emotions, and those of others, and use that knowledge to make the best decisions, regardless of the circumstances.

• Define EQ 

• Describe the four components of EQ 

• Use tips and techniques to develop your EQ

Hensikten med kurset er å gi blivende riggere en god teoretisk grunnopplæring i sikker bruk av: Fallsikringsutstyr og enkle løfteinnretninger (enkle travers- og søylesvingkraner, håndtaljer, luft- og eltaljer og transportable vinsjer.Opplæringen gir kandidaten god innsikt i prinsippene for fallsikringsutstyrs, enkle løfteinnretningers og transportable vinsjers konstruksjon, virkemåte, bruk og vedlikehold, slik at uhell og ulykker i forbindelse med riggeoperasjoner unngås.

Deltakeren må ha fullført G11 stroppekurs før kursstart.

Opplæringen dekker den nødvendige teoretiske som er nødvendig for å kunne gjennomføre det praktiske riggekurset, Modul O 3.2.

Kurset avsluttes med en teoretisk prøve. 

Kursinnhold
- Fallsikringsutstyr
- Travers- og søyle- svingkraner
- Håndtaljer, luft- og el-taljer
- Transportable vinsjer
- Avsluttende teoretisk prøve

This course is only available in Norwegian.

This course combines self-study by e-learning and classroom training with demonstrations and examples which is useful when working in explosive atmospheres.

The concept intrinsic safety is unlike the other Ex protection concepts as it is a system concept. Therefore, it is necessary to understand the system as a whole, how the environment and individual components affect the system to maintain the integrity of the intrinsically safe system.