Kurskatalog

Kurset omhandler følgende emner:

- Hvilke bedrifter skal ha AMU?
- Hvordan organisere AMU?
- Hva gjør AMU?

I begynnelsen av kurset kan du ta en pre-test, hvor du får mulighet til å vise dine kunnskaper. Består du pre-testen, behøver du ikke gå gjennom hele kurset.

Who is this course for?

Personnel who require a basic understanding of the operation of diesel engines and the importance of maintaining good lubrication for their safe operation.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an overview of how diesel engines operate, their components and their use within the industry. It will also outline the importance of maintaining good lubrication for their safe operation.

How will this course benefit my company?

This course will provide personnel with an overview of how diesel engines operate and the importance of maintaining good lubrication for their safe operation.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Presentation

This training course provides a general introduction to the corrosion process, the protective coating used to prevent corrosion, the coating process and coating inspection.

Objectives

On completion of the training, students will be able to:

Know the different types of corrosion and their causes.

Understand the corrosion phenomenon and the threat it represents to the structural integrity.

Know the protective coating systems used in shipbuilding.

Be familiar with the constituents, structure and curing prerequisites of the protective coating systems.

Understand the different phases of the coating process and the requirements for successful coating application.

Be familiar with coating inspection procedures and the requirements of the IMO PSPC.

Recognise the different forms of coating failure.

Program

Module 1 - Introduction to Corrosion and Protective Coatings

Corrosion definition

Causes of corrosion

Different forms of corrosion

Corrosion rate

Protective coating systems

Paint coating components

Types of coatings

Technical data sheets

Coating cure

Module 2 - Coating Process and Inspection

Coating process scheme

Surface preparation

Cleaning techniques

Surface preparation

Paint application

Coating durability requirements

Coating inspection

Coating system documentation

Coating inspector qualifications

Inspection procedures and plan

Coating defects

Certificate

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Corrosion and Coating awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Corrosion and Coating, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

Course Goal: 

This course aims to familiarize learners with US best practice in relation to working with sealed sources of radiation, and measures that should be taken to protect personnel from radiation exposure.

Learning Objectives:

LO1 Define what is meant by ‘radioactive material’

LO2 Explain what is meant by the terms ‘sealed source’ and ‘unsealed source’

LO3 Give examples of sealed sources in the workplace

LO4 Identify the hazards associated with radiation

LO5 Identify the PPE requirements for handling radioactive materials

LO6 Give an overview of the exposure limits for handling radioactive materials 

LO7 Describe the correct method for performing personal monitoring

LO8 Explain how the hazards associated with radioactive materials can be mitigated

LO9 Identify control measures that should be taken to protect personnel from radiation exposure

LO10 Explain the actions to take in the event of an emergency 

Kurset er kun tilgjengelig på engelsk.

For å bruke maritim VHF må du ha VHF/SRC-sertifikatet. Med dette kurset lærer du deg hele pensum på en enkel og lettfattelig måte.

Kurset inneholder følgende emner:
- Om VHF
- VHF-apparatet
- Praktisk bruk av VHF (DSC)
- Nødradioutstyr og globale kommunikasjonssystemer
- Avslutning

Presentation

This training course is about what an effective cyber security risk management should be. Its goal is not to address too many technical questions as the best technical expertise in the world won’t guarantee zero cyber risk. The course aims at providing your Company with a real battle plan: know the assets, know the enemies, organize accordingly and train the effectives. Although this will not be enough to avoid a cyber incident, the severity of the consequences of a cyber incident will depend on the company’s preparedness and ability to manage it.

Who the course is for?

The course ISM Code and Cyber Risk Management is aimed at anyone interested in understanding how an effective cyber security risk management should be. This may include Top Management of Shipping Companies, Ship Managers, Technical Superintendents, Ship Masters, Officers and Seafarers; Offshore Units Operators and Technical Staff, Shipyards Technical Staff; Surveyors; P&I and/or Insurance Inspectors; etc.

Objectives

On completion of the training, students will be able to:

Know what cyber security is, the main threats and their consequences.

Understand how to consider the cyber risks in the Safety Management System and how the ISM Code translated into cyber security.

Know the 12 cybersecurity commandments that will help implementing an efficient cyber risk management system.

Course Goal: This course aims to provide learners with an overview of gas liquids and their chemical and physical properties. 

Learning Objectives:

Section 1: An Overview of Gas Liquids

Section 2: Chemical and Physical Properties of Gas Liquids

Section 3: Liquefied Petroleum Gas

Section 4: Natural Gas Liquids (NGL) Recovery

Section 5: Removal of Natural Gas Impurities

Section 6: Liquefaction of Natural Gas

Section 7: Shore-Based Storage of Gas Liquids

Section 8: Transportation of Liquefied Natural Gas

Section 9: Health, Safety and Environmental (HSE) Issues of Gas Liquids

Kurset er kun tilgjengelig på engelsk. 

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable.

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.

Kurset gir en innføring i kjemikaliestyring, risikovurdering av helse i forbindelse med arbeid med kjemikaler. Kurset baserer seg på bruk av ChemiRisk som verktøy for risikovurdering og CHESS som elektronisk stoffkartotek. Kurset består av tre moduler (teori, stoffkartotek (CHESS) og bruk av ChemiRisk).

Kursinnhold

- Teori

- Stoffkartotek (CHESS)

- Bruk av ChemiRisk

Kurstilbyder: Proactima

NORSOK standard R-003, Sikker bruk av løfteutstyr er bransjestandarden for operasjon av løfteutstyr på norsk sokkel.

Kurset ”Sikker bruk av offshorekran” er bygget opp rundt NORSOK R-003 og er et viktig verktøy for å tilfredsstille myndighetenes krav om vedlikehold og verifikasjon av kompetanse innen sikker bruk av løfteutstyr.

Kurset fokuserer på god arbeidspraksis, samt å skape gode holdninger og sikkerhetsforståelse ved kranoperasjoner i henhold til NORSOK standard R-003.

Kurset gir en introduksjon til den nye versjonen av R-003 som ble lansert i 2017.

Dette kurset inneholder referanser til 2004 versjonen av R-003, men kurset i sin helhet vil bli oppdatert når ny versjon av R-003 blir lansert med oppdatert tillegg B.

Kurset inneholder:

-Introduksjon

-Ansvar og roller

-Planlegging og ledelse

-Kommunikasjon

-Forsyningsfartøy

-Lastbærer

-Kjemikalier

-Løft til og fra boredekk

-Bruk av styretau

-Løft av bore- og foringsrør

-Monterings- og demonteringsløft

-Løft av stilasemateriell og plank

-Blindkjøring

-Personløft

Dette kurset vil gjøre kandidatene forberedt til å gjennomføre praktisk og teoretisk eksamen i rotary drilling well control, surface og subsea BOP stack på driller-nivå (Level 3).

Alle kursdeltagere får en kursmanual og en egen oppgavebok. IWCF-eksamenen er inkludert i kurset.

Kurset er laget på grunnlag av rapporten "Recommendations for enhancements to well control training", utstedt av International Association of Oil & Gas Producers (OGP).

Innhold

- Hvordan forhindre kick
- Innstengningsprosedyrer
- Brønnkontrollmetoder
- Kill sheet-kalkulasjoner
- Praktisk simulatortrening
- Sirkulasjonsmetoder
- Praktisk simulatorprøve
- IWCF-eksamen siste dag (fredag)

Kurset leveres av Altus Intervention.

Dette kurset er kun tilgjengelig engelsk.

Who is this course for?
Process Operators and Lab Technicians

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an overview of the various types of process chemicals, their use and how they work.

Section 1: Basic Introduction to Chemistry
Section 2: Process Chemicals in the Oil and Gas Industry
Section 3: Identifying the Risks in the Use of Process Chemicals
Section 4: Managing Chemical usage

How will this course benefit my company?
By ensuring you have an overview of the various types of process chemicals, their use and how they work.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: 

This course aims to provide learners with an awareness of US best practice in relation to the safe operation of portable fire extinguishers.

Learning Objectives: 

LO1  Explain how fire spreads 

LO2  Identify the fire triangle and explain how it works 

LO3  Describe the dangers of smoke 

LO4  Describe the ways in which a fire can be extinguished 

LO5  Give an overview of the different fire classifications 

LO6  Describe the different types of fire extinguishers 

LO7  Explain the importance of carrying out a pre-engagement assessment 

LO8  Describe how to safely operate different types of fire extinguishers 

LO9  Explain the purpose of PASS 

Kurset er kun tilgjengelig på engelsk.

Who is this course for?

This course is aimed at all personnel involved in operations involving the use of seals, particularly those who are expected to undertake related duties in the workplace.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of the role and application of seals and gaskets

How will this course benefit my company?

To ensure you have an overview of the role and application of seals and gaskets

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Kurset er kun tilgjengelig på engelsk.  

Who is this course for?

Personnel who require knowledge or awareness of systems and equipment used for hydrocarbon processing.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide personnel with a broad overview of compressors, safety and controls systems, prime movers and ancillary systems.

How will this course benefit my company?

By ensuring you have an overview of common hydrocarbon processing systems and equipment and their associated hazards and controls.

What standards are referred to in this course?

There are no specific regulations referenced. The course is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Kurset dekker den teoretiske delen av dokumentert sikkerhetsopplæring som kreves for anhukere og signalgivere.

Kurset er også godt egnet som repetisjon for kranførere og annet personell som tidligere har gjennomført opplæring innen løfteinnretninger og løfteredskap.

Innholdet i kurset omhandler valg, kontroll og sikker bruk av de mest vanlige løfteredskap i bygg- og anlegg, industri, sjøfart og offshore.

Signalgivning, kommunikasjon og styring av last er sentrale emner i kurset.

Kurset forutsetter at det gjennomføres praktisk opplæring på aktuelt løfteredskap i tillegg.

Kurset inneholder følgende moduler:

• Løfteutstyr, ord og uttrykk

• Anhuking, tyngdepunkt, arbeidsvinkler og løftetabeller

• Fiberstropper

• Kjettingredskap

• Ståltaustropper

• Sjakler

• Øyebolter, øyemuttere og løfteører

• Signaler og tegn og styring av last

• Sikkerhetsregler

Hver modul inneholder øvingsoppgaver, og 8 av modulene har avsluttende test med 10 spørsmål i hver modul.

Kurset gir en grunnleggende innføring i sikker bruk av slanger og valg av slanger til forskjellige bruksområder. Videre har kurset fokus på identifisering av gjengetyper og kuplinger, samt grunnleggende praktisk opplæring i slangepressing.

Etter kurset skal deltakeren være i stand til å bruke slangepresseutstyr på riktig måte som ivaretar en sikker og riktig arbeidsprosess innen området. Kurset er delt inn i en teoretisk og en praktisk del og avsluttes med en skriftlig sertifiseringstest. Kurset gjennomføres i henhold til standardene TR 1803 og Oil and Gas UK Standard.

Who is the course for?

This course is aimed at individuals working in industrial sectors whose activities can impact the environment.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

This course will give you a basic understanding of environmental ‘aspects’ and ‘impacts’ and explain the purpose of an Environmental Management System (EMS).

The knowledge gained in this course will help you to stay in compliance with legislative requirements. It will also explain how you can play your part in improving environmental performance.

How will the course benefit my company?

By ensuring you are fully aware of the role of ISO 14001 in environmental management, you contribute to continual improvement in environmental performance, as well as ensuring that you operate in compliance with relevant regulations and legislation.

What standards are referenced in the course?

ISO 14001

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Dette kurset er kun tilgjengelig på engelsk.

This introductory course provides the drilling personnel with basic understanding of well control. Progressing junior staff get a solid background and knowledge of why well control is essential, how well control is maintained, what the indicators are that well control might be lost, and how to regain the control once it has been lost.

Understand the negative consequences associated with loss of well control
Understand the need for detection
Recognize the warning signs of abnormal pressure
Know the actions that should be taken when kick indicators are present
Be familiar with the functions of the bop equipment
Be able to select well control method to regain control
Be able to fill in a IWCF surface and/or subsea kill sheet
Be able to calculate kill mud weight, initial circulation pressure and final circulation pressure
Correctly obtain shut in pressures in the well
Understand the barrier concept
Know the impact pumping cement could have on well control
Obtain sufficient knowledge to pass a written IWCF test with minimum 70% score

This option is more aimed at delegates with prior knowledge/experience in the workplace assessment, who are looking to consolidate their skills and knowledge to gain a formal certificate.

The e-learning material includes:

How to build a portfolio of evidence that meets the L&D9DI standard 

How to demonstrate knowledge of the above processes and a range of knowledge related to competence assessment in the workplace

What’s included in this course:

• SQA Registration Fee

• Online Induction

• Access to L&D9DI evidence requirements e-modules 

• Full explanation of evidence requirements and access to templates and evidence guides and examples 

• Virtual classroom on request - Introduction to SQA running weekly 

• Comprehensive support from an ITB Assessor to completion

• Assessment and Internal Verification of your submitted evidence

• SQA Certification Successful delegates will receive a certificate from the Scottish Qualifications Authority (SQA)

Virtual webinar sessions running weekly with an ITB Trainer for a Q&A session. Join as many virtual sessions as needed to support to completion of the full SQA qualification. 

Those who assess in the workplace using direct and indirect methods of assessment using examples: observation, questioning, work product, professional discussions, simulations, written evidence such as witness statements and candidate statements and RPL.

Assessment Requirements

Delegates will be required to submit a portfolio of evidence covering all of the Performance and Knowledge Criteria for the L&D9DI Unit. They must submit, as a minimum, assessment-related documentation that provides evidence for the elements listed below, for two candidates, covering two assessments per candidate: 

• Preparing to assess 

• Planning assessments 

• Assessing candidate’s performance and knowledge 

• Confirming progression and achievement

Delegates must use a range of assessment methods, including observation, questioning and work product. 

Delegates will also need to be observed carrying out part of the assessment process by an ITB (or NVQ-level) assessor and participate, with other assessors in their workplace, in standardisation practice.