Oil and Gas

Course catalogue

hits
158
Course code: EBA-008
Course type: E-learning course
Duration: 9 hours
Language: Norwegian
Price: NOK 1900,-

Du må ha gjennomført stillaskurs del 1 før dette kurset. 

Dette kurset er bygget på krav i Forskrift om utførelse av arbeid, kapittel 17, som omhandler montering, demontering og endring av stillas.
Forskriften krever opplæring for ulike stillashøyder:
-2-5 meter: 7,5 timer teori og 7,5 timer praksis
-5-9 meter: 15 timer teori og 15 timer praksis
-Over 9 meter: 36 timer teori og 72 timer praksis.

Dette kurset forutsetter at du har gjennomført stillaskurs del1. Til sammen dekker disse kursene kravene til teoretisk opplæring for stillas over til 9 meter, og tilsvarer kravene i Forskrift om utførelse av arbeid § 17-2 -17-4 om teoretisk opplæring.
I tillegg er det krav om 72 timer praktisk opplæring under tilsyn av kvalifisert person, ref Forskrift om utførelse av arbeid § 17-2 - 17-4.

Kursinnhold:
-Innledning
-Risiko ved arbeid i høyden
-Montering, endring og demontering
-Rør og kobling
-Vindkrefter, beregning for vindkrefter og forankring
-Sikkert arbeid i høyden, risikovurdering og fallsikring
-Diverse stillaskonstruksjoner
-Beregninger

 

Dersom du har gjennomført stillasopplæring (teorikurs) - og kan dokumentere nødvendig praksis i henhold til kravene i forskrift om utførelse av arbeid §§17-2, 17-3 og 17-4 - kan du bestille stillasbevis.

 

Klikk her for informasjon: https://www.eba.no/stillasbevis/

Course code: EBA-007
Course type: E-learning course
Duration: 8 hours
Language: Norwegian
Price: NOK 1900,-

Requirements for training related to scaffolding are regulated by law and regulations. This course is based on the requirements of Regulations concerning the Performance of Work, Chapter 17, which is about assembly, dismantling and alteration of scaffolding.

-2-5 meters: 7.5 hours theory and  7.5 hours practical training
-5-9 meters: 15 hours theory and 15 hours practical training
-Over 9 meters: 36 hours theory and 72 hours practical training

This course covers the requirements of theoretical training for scaffolding up to 9 meters, and corresponds to the requirements of the Regulations concerning the Performance of Work, Section 17-2 and 17-3, on theoretical training. There is an additional requirement of 15 hours practical training if 5-9 meters. 

Course content:
-What is scaffolding
-Scaffolding and safety
-Risk assessment
-Forces and counter forces
-Structure of a scaffold
-Wind forces
-How to prevent accidents
-Mobile scaffold towers
-Haki scaffolding systems

 

Dersom du har gjennomført stillasopplæring (teorikurs) - og kan dokumentere nødvendig praksis i henhold til kravene i forskrift om utførelse av arbeid §§17-2, 17-3 og 17-4 - kan du bestille stillasbevis.

Klikk her for informasjon: https://www.eba.no/stillasbevis/

Course code: NI-011
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian / english
Price: NOK 400,-

The course covers the following topics:

- Which companies should have a Working Environment Committee (AMU)?
- How to organize the a Working Environment Committee (AMU)?
- What is a Working Environment Committee (AMU)?

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Course code: PRO-024
Course type: E-learning course
Duration: 2 hours
Language: English
Price: NOK 2500,-

This course provides an introduction to chemical management, risk assessment of health in relation to work with chemicals. The course is based on the use of ChemiRisk as a tool for risk assessment and CHESS as chemical database. The course consists of three modules (theory, chemical database (CHESS) and using ChemiRisk).

 

Course Content

- Theory

- Substance (CHESS)

- Use of ChemiRisk

 

Course provider: Proactima

Course code: MUK-211
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

How will this course benefit my company?
By ensuring you have an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: LSI-005
Course type: E-learning course
Duration: 4 hours 30 minutes
Language: English
Price: NOK 1190,-

This course covers the theoretical part of the documented safety training required for slingers and signallers. The course is also suitable as a refresher for crane operators and other personnel who have previously completed training in lifting appliances and lifting gear. The course content deals with selection, control and safe use of the most common lifting gear used in construction, industry, shipping and offshore. Signalling, communication and controlling the load are key topics of the course.

In addition, the course requires that practical training is conducted on applicable work equipment.

 

The course contains 9 modules:

• Lifting equipment, expressions and acronyms

• Slinging, center of gravity, working angles and lifting tables

• Fibre slings

• Lifting gears of chain

• Wire rope slings

• Shackles

• Eye bolts, nuts and lifting lugs

• Signals and signs, and control of load

• Safety regulations for lifting operations

Course code: MUK-119
Course type: E-learning course
Duration: 1 hour
Language: English
Price: NOK 1000,-

Who is this course for?

Personnel requiring an awareness or understanding of (Material) Safety Data Sheets ((M)SDS) for chemicals.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of the structure and information contained in Safety Data Sheets.

 

How will this course benefit my company?

By ensuring you have an overview of Safety Data Sheets and how your role may require to understand certain information contained in the sheets.

 

What standards are referred to in this course?

Chemicals (Hazard Information and Packaging for Supply) Regulations 2009

CLP Regulation

REACH Regulation

Control of Substances Hazardous to Health (CoSHH) Regulations

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Course code: VTK-003
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 4725,-

Only in Norwegian

Kurset gir kunnskap om farer ved hydrogensulfid og svoveldioksid, symptomer ved forgiftning og kunnskap om livreddende førstehjelp. Kursdeltakerne skal lære å ta vare på egen og andres sikkerhet ved riktig bruk av verneutstyr. Etter fullført kurs kan deltakerne arbeide i H2S-utsatte områder.



Kursinnhold
- Farer, kjennetegn og egenskaper ved hydrogensulfid (H2S) og Svoveldikosid (SO2)
- Kilder til H2S og SO2
- Riktig bruk av deteksjonsutstyr
- Symptomer på eksponering
- Redningsteknikker og førstehjelp til personer utsatt for H2S- og SO2-eksponering
- Riktig bruk og vedlikehold av åndedrettsvern: Teori, demonstrasjon og praksis
- Kunnskap om vindretning og evakuering
- Prosedyrer for entring av lukket rom
- Grenseverdier for H2S og SO2

Kurset bygger på følgende regelverk:
- API recommended practice 49 Recommended Practice for Drilling and Well Servicing Operations Involving Hydrogen Sulfide
- Arbeidstilsynets Grunnlag for fastsettelse av administrativ norm for hydrogensulfid
- Forskrift om tiltaks- og grenseverdier best. Nr. 704

Course code: MUK-125
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring an awareness or understanding of the common safety methods when using scaffolding over the sea.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to give an overview of requirements for safe scaffolding operations over sea.

 

How will this course benefit my company?

By ensuring you have an overview of the requirements for the safe use of scaffolding over the sea.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: VTK-002
Course type: Classroom course
Duration: 1 day
Language: Norwergian
Price: From NOK 4725,-

The course is only available in Norwegian.

 

Kurset skal gi deltakerne praktisk opplæring i gassmåling og kunnskap om farer ved arbeid i utsatte miljøer. Kurset er holdningsskapende og skal gi økt bevissthet rundt viktigheten av gassdeteksjon og riktig bruk av verneutstyr.


Kursinnhold
- Målebegreper for gassmåling
- Målemetoder
- Sjekkliste for å kontrollere og klargjøre instrumentet før bruk
- Riktig bruk av gassmålingsinstrumentet
- Instrumentets begrensninger
- Farer ved for lite og for mye oksygen
- Farer ved giftig gass, VOC og brennbare gasser
- Krav til sikker pusteluft og gassfri atmosfære
- Arbeid i lukket rom
- Dagens eksponeringsbilde for kjemikalier
- Viktigheten av gassdeteksjon og personlig varsling
- Kjennskap til gjeldende regelverk
- Oppgaver og praktiske øvelser


Kurset bygger på følgende lovverk/regelverk:
- Forskrift 703 Utførelse av arbeid
- Forskrift 706 Tiltaks- og grenseverdier


Course code: MUK-195
Course type: E-learning course
Duration: 45 minutes
Language: Norwegian
Price: NOK 500,-

Course Goal:  This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

 

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Learning Objectives

LO1 Outline the extent of the problem of slips, trips and falls at work

LO2 Identify the causes of slips, trips and falls

LO3 Describe the importance of following regulatory requirements to help reduce the risk of slips, trips and falls occurring

LO4 Explain the duties of employers in preventing slips, trips and falls in the workplace

LO5 Explain the hierarchy of controls in preventing, and reducing, the risk of slips

LO6 Explain the actions that can be taken to prevent and reduce the risk of trips

LO7 Explain the responsibilities of employees in preventing slips, trips and falls

Course code: RVT-954
Course type: E-learning course
Duration: 60 minutes
Language: English (US)
Price: GBP 30,-

Stress is our body's way of responding to physical, emotional, or mental demands. Although typically associated with negative circumstances, stress can be caused by both good and bad experiences. Our bodies react to stress by releasing chemicals into the blood to give us energy and strength to handle the situation. This evolutionary reaction can be a good thing when stress is caused by real physical danger; however, this survival response can wreak havoc if it builds up without a proper outlet. This interactive online course discusses signs and symptoms of stress, and explains the physical and emotional effects of built up stress, such as pain and anxiety. The course also describes stress management techniques, treatment options, and lifestyle changes to help alleviate stress.

Course code: MUK-009P
Course type: E-learning course
Duration: 45 minutes
Language: Brazilian Portuguese
Price: NOK 500,-

This course aims to give personnel the knowledge required to understand the hazards and controls associated with noise in the workplace.

 

Course Content

LO1 Describe what noise-induced hearing loss is, and identify the early warning signs and symptoms to look out for

LO2 Explain the workings of the human ear, how noise exposure causes damage, and the effects of such damage

LO3 Explain the responsibilities and duties of employers and employees under current legislation

LO4 Explain how noise is measured and identify the noise levels above which employers should take action to reduce exposure

LO5 Explain the risk assessment requirements

LO6 Identify the control measures that should be taken to reduce exposure to noise

LO7 Explain the requirements for hearing protection; how to use the different methods of hearing protection and the importance of maintaining hearing protection

LO8 Explain the importance of healthsurveillance

Course code: MUK-115
Course type: E-learning course
Duration: 40 minutes
Language: English
Price: NOK 600,-

Who is the course for?

All personnel who work in a role that may put them at risk of a hand or body injury.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with an introduction on how to prevent hand and body injuries in the workplace.

How will the course benefit my company?

This course to ensure personnel have the knowledge of how to protect their hands and body from injury in the workplace, by following safety measures and understanding procedures.

What standards are referenced in the course?

Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: AST-008
Course type: E-learning course
Duration: 22 hours
Language: English
Price: GBP 350,-

Provided in association with Astutis, approved centre 1857.


IOSH Managing Safely is a basic risk management health and safety certificate which will offer managers an understanding of the practical actions needed for the health and safety of their teams.

 

It enables organizations to demonstrate a commitment to health and safety standards by ensuring managers and supervisors are aware of their responsibilities and the positive actions they can take to ensure a safe a healthy working environment.

 

On completion of the course, learners will be able to:

 

• Understand your responsibilities for safety in the workplace.

• Recognise common workplace hazards and implement appropriate control measures.

• Estimate, evaluate and reduce risk by applying a hierarchy of risk control.

• Undertake structured risk assessments and accident investigations.

• Understand the requirements of HSE legislation.

• Recognise different ways to measure and improve health and safety performance.

 

Course code: KOL-014
Course type: Classroom course
Duration: 40 hours
Language: Norwegian
Price: From NOK 10200,-

Grunnleggende opplæring i arbeidsmiljø og HMS for verneombud, medlemmer av AMU (arbeidsmiljøutvalget), ledere, arbeidsledere og tillitsvalgte. Kurset tilfredsstiller kravene i AML § 6-5 til opplæring av verneombud.

Kursinnhold
- Arbeid med og innføring i Arbeidsmiljøloven
- Hovedprinsipper i helse-, miljø- og sikkerhetsarbeid
- AMU
- HMS system (internkontroll)
- Arbeidsgivers og arbeidstakers plikter
- Psykososialt arbeidsmiljø
- Fysisk arbeidsmiljø
- Sykefravær og arbeidsmiljø
- AKAN
- Inkluderende arbeidsliv
- Varsling

This course is only available in Norwegian.

Course code: MUK-187
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Course goal: This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

Target Audience: All onshore and offshore personnel

 

Learning Objectives

LO1 Outline the extent of the problem of slips, trips and falls at work

LO2 Identify the causes of slips, trips and falls

LO3 Describe the importance of following regulatory requirements to help reduce the risk of slips, trips and falls occurring

LO4 Explain the duties of employers in preventing slips, trips and falls in the workplace

LO5 Explain the hierarchy of controls in preventing, and reducing, the risk of slips

LO6 Explain the actions that can be taken to prevent and reduce the risk of trips

LO7 Explain the responsibilities of employees in preventing slips, trips and falls

 

 

Course code: MUK-201
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: NOK 500,-

Who is this course for?

Personnel requiring an awareness or understanding of US fire extinguishers.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of portable fire extinguishers.

 

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US portable fire extinguishers.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: LSI-001
Course type: E-learning course
Duration: 1 hour
Language: Norwegian
Price: NOK 650,-

The goal of this course is that all personnel who use hazardous work equipment, will gain good knowledge of HSE when using work equipment. The course deals with personnel requirements, roles and responsibilities, as well as accidents and regulations on safety.

In addition, the course requires that practical training is conducted on applicable work equipment.

The course covers the following topics:

• Work equipment in general
• Use of work equipment
• Selection of work equipment
• Training in the use of work equipment
• Workspaces and personnel requirements
• Risk assessment
• Safety, accidents and liability
• Direct and underlying causes of accidents
• Relevant laws and regulations

The course includes exercises, and final test with 30 questions.

Course code: LSI-003
Course type: E-learning course
Duration: 3 hours
Language: Norwegian
Price: NOK 990,-
Hits per page
| 1 ... 7 |