Course catalogue

This course covers the theoretical part of the documented safety training required for slingers and signallers. The course is also suitable as a refresher for crane operators and other personnel who have previously completed training in lifting appliances and lifting gear. The course content deals with selection, control and safe use of the most common lifting gear used in construction, industry, shipping and offshore. Signalling, communication and controlling the load are key topics of the course.

In addition, the course requires that practical training is conducted on applicable work equipment.

The course contains 9 modules:

• Lifting equipment, expressions and acronyms

• Slinging, center of gravity, working angles and lifting tables

• Fibre slings

• Lifting gears of chain

• Wire rope slings

• Shackles

• Eye bolts, nuts and lifting lugs

• Signals and signs, and control of load

• Safety regulations for lifting operations

Only in Norwegian

Kurset gir kunnskap om farer ved hydrogensulfid og svoveldioksid, symptomer ved forgiftning og kunnskap om livreddende førstehjelp. Kursdeltakerne skal lære å ta vare på egen og andres sikkerhet ved riktig bruk av verneutstyr. Etter fullført kurs kan deltakerne arbeide i H2S-utsatte områder.

Kursinnhold
- Farer, kjennetegn og egenskaper ved hydrogensulfid (H2S) og Svoveldikosid (SO2)
- Kilder til H2S og SO2
- Riktig bruk av deteksjonsutstyr
- Symptomer på eksponering
- Redningsteknikker og førstehjelp til personer utsatt for H2S- og SO2-eksponering
- Riktig bruk og vedlikehold av åndedrettsvern: Teori, demonstrasjon og praksis
- Kunnskap om vindretning og evakuering
- Prosedyrer for entring av lukket rom
- Grenseverdier for H2S og SO2

Kurset bygger på følgende regelverk:
- API recommended practice 49 Recommended Practice for Drilling and Well Servicing Operations Involving Hydrogen Sulfide
- Arbeidstilsynets Grunnlag for fastsettelse av administrativ norm for hydrogensulfid
- Forskrift om tiltaks- og grenseverdier best. Nr. 704

Who is this course for?

Personnel requiring an awareness or understanding of the common safety methods when using scaffolding over the sea.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to give an overview of requirements for safe scaffolding operations over sea.

How will this course benefit my company?

By ensuring you have an overview of the requirements for the safe use of scaffolding over the sea.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course goal: This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

Target Audience: All onshore and offshore personnel

Learning Objectives

LO1 Outline the extent of the problem of slips, trips and falls at work

LO2 Identify the causes of slips, trips and falls

LO3 Describe the importance of following regulatory requirements to help reduce the risk of slips, trips and falls occurring

LO4 Explain the duties of employers in preventing slips, trips and falls in the workplace

LO5 Explain the hierarchy of controls in preventing, and reducing, the risk of slips

LO6 Explain the actions that can be taken to prevent and reduce the risk of trips

LO7 Explain the responsibilities of employees in preventing slips, trips and falls

The course is only available in Norwegian.

Kurset skal gi deltakerne praktisk opplæring i gassmåling og kunnskap om farer ved arbeid i utsatte miljøer. Kurset er holdningsskapende og skal gi økt bevissthet rundt viktigheten av gassdeteksjon og riktig bruk av verneutstyr.

Kursinnhold
- Målebegreper for gassmåling
- Målemetoder
- Sjekkliste for å kontrollere og klargjøre instrumentet før bruk
- Riktig bruk av gassmålingsinstrumentet
- Instrumentets begrensninger
- Farer ved for lite og for mye oksygen
- Farer ved giftig gass, VOC og brennbare gasser
- Krav til sikker pusteluft og gassfri atmosfære
- Arbeid i lukket rom
- Dagens eksponeringsbilde for kjemikalier
- Viktigheten av gassdeteksjon og personlig varsling
- Kjennskap til gjeldende regelverk
- Oppgaver og praktiske øvelser

Kurset bygger på følgende lovverk/regelverk:
- Forskrift 703 Utførelse av arbeid
- Forskrift 706 Tiltaks- og grenseverdier

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

How will this course benefit my company?
By ensuring you have an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal:  This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Learning Objectives

LO1 Outline the extent of the problem of slips, trips and falls at work

LO2 Identify the causes of slips, trips and falls

LO3 Describe the importance of following regulatory requirements to help reduce the risk of slips, trips and falls occurring

LO4 Explain the duties of employers in preventing slips, trips and falls in the workplace

LO5 Explain the hierarchy of controls in preventing, and reducing, the risk of slips

LO6 Explain the actions that can be taken to prevent and reduce the risk of trips

LO7 Explain the responsibilities of employees in preventing slips, trips and falls

This course aims to give personnel the knowledge required to understand the hazards and controls associated with noise in the workplace.

Course Content

LO1 Describe what noise-induced hearing loss is, and identify the early warning signs and symptoms to look out for

LO2 Explain the workings of the human ear, how noise exposure causes damage, and the effects of such damage

LO3 Explain the responsibilities and duties of employers and employees under current legislation

LO4 Explain how noise is measured and identify the noise levels above which employers should take action to reduce exposure

LO5 Explain the risk assessment requirements

LO6 Identify the control measures that should be taken to reduce exposure to noise

LO7 Explain the requirements for hearing protection; how to use the different methods of hearing protection and the importance of maintaining hearing protection

LO8 Explain the importance of healthsurveillance

Grunnleggende opplæring i arbeidsmiljø og HMS for verneombud, medlemmer av AMU (arbeidsmiljøutvalget), ledere, arbeidsledere og tillitsvalgte. Kurset tilfredsstiller kravene i AML § 6-5 til opplæring av verneombud.

Kursinnhold
- Arbeid med og innføring i Arbeidsmiljøloven
- Hovedprinsipper i helse-, miljø- og sikkerhetsarbeid
- AMU
- HMS system (internkontroll)
- Arbeidsgivers og arbeidstakers plikter
- Psykososialt arbeidsmiljø
- Fysisk arbeidsmiljø
- Sykefravær og arbeidsmiljø
- AKAN
- Inkluderende arbeidsliv
- Varsling

This course is only available in Norwegian.

Who is the course for?

All personnel who work in a role that may put them at risk of a hand or body injury.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with an introduction on how to prevent hand and body injuries in the workplace.

How will the course benefit my company?

This course to ensure personnel have the knowledge of how to protect their hands and body from injury in the workplace, by following safety measures and understanding procedures.

What standards are referenced in the course?

Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The goal of this course is that all personnel who use hazardous work equipment, will gain good knowledge of HSE when using work equipment. The course deals with personnel requirements, roles and responsibilities, as well as accidents and regulations on safety.

In addition, the course requires that practical training is conducted on applicable work equipment.

The course covers the following topics:

• Work equipment in general
• Use of work equipment
• Selection of work equipment
• Training in the use of work equipment
• Workspaces and personnel requirements
• Risk assessment
• Safety, accidents and liability
• Direct and underlying causes of accidents
• Relevant laws and regulations

The course includes exercises, and final test with 30 questions.

Provided in association with Astutis, approved centre 1857.

IOSH Managing Safely is a basic risk management health and safety certificate which will offer managers an understanding of the practical actions needed for the health and safety of their teams.

It enables organizations to demonstrate a commitment to health and safety standards by ensuring managers and supervisors are aware of their responsibilities and the positive actions they can take to ensure a safe a healthy working environment.

On completion of the course, learners will be able to:

• Understand your responsibilities for safety in the workplace.

• Recognise common workplace hazards and implement appropriate control measures.

• Estimate, evaluate and reduce risk by applying a hierarchy of risk control.

• Undertake structured risk assessments and accident investigations.

• Understand the requirements of HSE legislation.

• Recognise different ways to measure and improve health and safety performance.

Requirements for training related to scaffolding are regulated by law and regulations. This course is based on the requirements of Regulations concerning the Performance of Work, Chapter 17, which is about assembly, dismantling and alteration of scaffolding.

-2-5 meters: 7.5 hours theory and  7.5 hours practical training

-5-9 meters: 15 hours theory and 15 hours practical training

-Over 9 meters: 36 hours theory and 72 hours practical training

This course covers the requirements of theoretical training for scaffolding up to 9 meters, and corresponds to the requirements of the Regulations concerning the Performance of Work, Section 17-2 and 17-3, on theoretical training. There is an additional requirement of 15 hours practical training if 5-9 meters.

Course content:
-What is scaffolding
-Scaffolding and safety
-Risk assessment
-Forces and counter forces
-Structure of a scaffold
-Wind forces
-How to prevent accidents
-Mobile scaffold towers
-Haki scaffolding systems

Dersom du har gjennomført stillasopplæring (teorikurs) - og kan dokumentere nødvendig praksis i henhold til kravene i forskrift om utførelse av arbeid §§17-2, 17-3 og 17-4 - kan du bestille stillasbevis.

Klikk her for informasjon: https://www.eba.no/stillasbevis//

Who is this course for?

Personnel requiring an awareness or understanding of (Material) Safety Data Sheets ((M)SDS) for chemicals.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the structure and information contained in Safety Data Sheets.

How will this course benefit my company?

By ensuring you have an overview of Safety Data Sheets and how your role may require to understand certain information contained in the sheets.

What standards are referred to in this course?

Chemicals (Hazard Information and Packaging for Supply) Regulations 2009

CLP Regulation

REACH Regulation

Control of Substances Hazardous to Health (CoSHH) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Who is this course for?

All personnel involved in trenching and excavation activities.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the hazards specific to trenching and excavation activities. 

How will this course benefit my company?

By ensuring you have an overview of the hazards specific to trenching and excavation activities. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel involved in welding operations in the workplace in the US.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of OSHA safe working practices in relation to welding operations.

How will this course benefit my company?

By ensuring you have an overview of OSHA safe working practices in relation to welding operations.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims to provide an overview of management of change. The course focuses on the steps of the management of change process, the roles and responsibilities of personnel, and the risks involved in change management and their associated control measures.

Learning Objectives:

LO1 Explain why the effective management of change is an essential part of operations in the Oil and Gas Industry

LO2 Define ‘change’

LO3 Describe the key stages in the management of change process 

LO4 Identify the key roles and responsibilities involved in effective management of change 

LO5 Identify the risks associated with management of change

LO6 Explain how the risks associated with management of change can be managed

For Norwegian version of this course, please enrol to "OG1 Basic emergency management, (e-learning) (Norwegian version)" Course.

Proactive emergency response management involves identifying measures that can control the development in the desired direction and take action before circumstances force one to do it.
This course is the first step of the way to handle such situations and thus participate in 2nd or 3rd line emergency response organization onshore.

Course content:
• Introduction
• Defined hazard and accident situations
• External resourses
• The structure and use of emergency plan
• Training and exercises
• Evaluation and improvement
• Stress reaction in an emergency organisation
 

Learning methods:
E-learning. It is recommended that e-learning course is followed up with collection, training and exercises. Please contact course provider Proactima for a customized business services.