Course catalogue

Who is this course for?
Production operators.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

How will this course benefit my company?
By ensuring you have appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

What standards are referred to in this course?
This course does not refer to specific legislation or standards.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All personnel who may be exposed to nitrogen in the workplace.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

This course aims to provide learners with an awareness of nitrogen and provide best practice for work involving nitrogen in oil and gas producing facilities.

How will the course benefit my company?

The course will benefit companies by ensuring that all relevant personnel understand the best practice when working with nitrogen in oil and gas producing facilities.

What standards are referenced in the course?

Control of Substances Hazardous to Health (COSHH) Regulations 

Health and Safety Executive (Health and Safety Executive (HSE)

The Occupational Safety and Health Administration (OSHA)

Is there an assessment?

Yes

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?
Any members of management, supervisor and shipboard management responsible for Ballast Water.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
The primary goal of this course are awareness and knowledge of Ballast Water Management in accordance with the International Convention for the Control and Management of Ships' Ballast Water and Sediments, referred to as the BWM Convention.

How will this course benefit my company?
By ensuring you are familiar with the best practices related to Ballast Water Management.

What standards are referred to in this course?
In compliance with IMOs Ballast Water Management Convention (BWMC) 2004 and industry best practice, and complying with US trade and US Coast Guard.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

This eLearning course is aimed at individuals required to work using display screen equipment, such as a computer, laptop or tablet.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will give you a basic understanding of the key health risks associated with display screen equipment and what you can do to mitigate them.

How will this course benefit my company?

By ensuring you are fully aware of how to avoid injury while working at your computer, you can help reduce the number of lost workdays and hours due to health issues.

What standards are referred to in this course?

Health and Safety (Display Screen Equipment) Regulations

Is there an assessment?

Yes

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?

All personnel within the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to increase learners’ awareness of the importance of Personal Protective Equipment (PPE), and outline the legal duties and responsibilities of employers and employees in relation to PPE.

How will this course benefit my company?

The course will benefit companies by reducing PPE related incidents and injuries. 

What standards are referred to in this course?

Control of Lead at Work Regulations 

Ionising Radiations Regulations 

Control of Asbestos at Work Regulations 

Control of Substances Hazardous to Health Regulations 

Control of Noise at Work Regulations

Personal Protective Equipment at Work Regulations

Is there an assessment?

Yes.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH). 

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All personnel who work with machinery, tools and appliances.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

This course aims to provide learners with an awareness of the requirements of the Provision and Use of Work Equipment Regulations (PUWER) and how they apply in the workplace.

How will the course benefit my company?

This course will benefit companies’ by providing personnel with an awareness of PUWER. 

What standards are referenced in the course?

Provision and Use of Work Equipment Regulations (PUWER)

Health and Safety at Work Act

Management of Health and Safety at Work Regulations

Is there an assessment?

Yes

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is this course for:
Every seafarer with designated security duties (STCW Table A-VI/6-2)

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
Piracy and armed robbery is a real threat to seafarer’s onboard ships and mobile units at sea. 1st January 2014 a requirement about seafarer’s security training was put in force for all ships to which the ISPS Code applies.
The training consists of an e-learning course and the performance of certain on board activities described in a checklist. The client’s approved instructors must sign completed checklists for each trainee. When the training is completed a certificate is issued by the Norwegian Maritime Authority.

This course will be a part of a blended learning in two stages:
The first stage is this e-learning course
The second stage will be on board training reflecting the realities on-board the vessel you are serving on. This training might take a couple of weeks or more to complete, as you will be required to participate in a number of drills.

The training will be complete when all the elements of the checklist pertaining to your designated security duties.

Completion of this course requires that you are employed in a company that has a plan in place for on board training for this kind of activities. Contact Mintra for more information about how to complete this training.

The course will not be approved for private individuals.

How will this course benefit my company?
By ensuring you have the knowledge and are certified according to the STCW regulations.

What standards are referred to in this course?
STCW - Security Awareness, table A-VI/6-2
SOLAS - Safety of Life at Sea
MARPOL - Marine Pollution
ISM Code

This training programme in Designated Security Duties is approved by the Norwegian Maritime Authority.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Any personnel who require knowledge of Legionella bacteria.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

By providing personnel with an overview of the steps that can be taken to reduce the risks posed by Legionella in the workplace.

How will this course benefit my company?

By providing personnel with an overview of how to identify the risks associated with Legionella and the control measures that can be implemented to reduce those risks.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?

Ship Officers

Is previous experience required?

Documented 12 months seaservice as an officer onboard an ISPS vessel. 

How will this course benefit me?

After successfully completing this course, you should be able to undertake the duties and responsibilities of a Ship Security Officer, as defined in section A/12.2 of the ISPS Code and in section A-VI/5 of the STCW Code. The course enables you to maintain and supervise the implementation of the Ship Security Plan, evaluate the security risk, threat and vulnerability, make regular inspections to ensure that appropriate safeguards are implemented and maintained, and ensure that the security systems are operated, tested and calibrated correctly.

How will this course benefit my company?

By ensuring you are qualified and certified as a Ship Security Officer (SSO).

What standards are referred to in this course?

STCW A-VI/5 and ISPS code section A/12.2.

The course is approved by the Norwegian maritime Authority. Approved certificate as Ship Security Officer will be issued upon course completion.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%. 

This course is a combined training consisting of: Elearning and onboard training (exercises and checklists).

To complete the course, it is required that you are employed by a company which has a plan for onboard training with these kind of activities.

The course will not be approved for any persons without a connection to a company as described above.

Who is this course for?
This course is aimed at all personnel involved in mechanical isolations.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide all relevant personnel with an overview of best practices in mechanical isolations.

How will this course benefit my company?
The course will benefit companies by ensuring that all relevant personnel have an understanding of mechanical isolation best practices, which will reduce accidents and injuries at work.

What standards are referred to in this course?
No standards or regulations are referenced in this course.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
Key employees (IT and HR staff, board members)

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course is designed to raise the awareness how organisations, and all employees in contact with personal data are affected by GDPR Legislation (2018).

The course gives an overview of definitions, roles and responsibilities, the rights of individuals and the obligations of businesses with respect to the regulation.

We examine the territorial scope and outline the general requirements, technical solutions and administrative routines required for GDPR compliance, whilst also examining how to handle the issues sourrounding a data breach, should it occur.

The course content is developed in cooperation with Advokatfirmaet Schjødt AS.

How will this course benefit my company?
By ensuring you have the awareness of how organisations, and all employees in contact with personal data are affected by GDPR Legislation (2018).

What standards are referred to in this course?
EU's General Data Protection Regulation - GDPR (2018)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel who are involved in the preparation of dangerous goods for transportation by sea.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

This course aims to provide learners with industry best practice in relation to the transportation of dangerous goods by sea. The course should enable personnel to recognise the classes of dangerous goods and to pack, mark, label and document articles and items correctly.

How will the course benefit my company?

By ensuring you are familiar with industry best practice in relation to the transportation of dangerous goods by sea.

What standards are referenced in the course?

• International Convention for the Safety of Life at Sea (SOLAS)

• International Maritime Dangerous Goods (IMDG) Code

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with a broad overview of common Electrical Safety Rules, and outlines best practice when working with electricity.

How will this course benefit my company?

By ensuring you have the knowledge of common Electrical Safety Rules, and the best practice when working with electricity, to reduce risk and injury at work.

What standards are referred to in this course?

• Health and Safety at Work Act

• Electricity at Work Regulations

• Management of Health and Safety at Work Regulations

• Electricity at Work Safe Working Practices

• Offshore Electricity and Noise Regulations

• Provision and Use of Work Equipment Regulations

• BS 7671: 2018 Requirements for Electrical Installations

• Offshore Installations (Safety Case) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who work with pressurised cylinders, compressed gas or associated equipment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an overview of the use of pressurised cylinders, the risks involved and storage requirements.

How will this course benefit my company?

By ensuring you have an overview of the use of pressurised cylinders, the risks involved and storage requirements.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All personnel who are at risk from slips, trips and falls.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

How will the course benefit my company?

This course will benefit companies’ by reducing slip, trip and fall injuries among personnel.

What standards are referenced in the course?

Health and Safety at Work Act

Management of Health and Safety at Work Regulations

Workplace (Health, Safety and Welfare) Regulations

Health and Safety Executive (HSE)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

This course aims to enhance the capabilities of shipboard personnel who sail on ships using LFF (low flashpoint fuel) as propulsion energy. It focuses on the responsibilities of all personnel serving on these kinds of ships. The course is developed in accordance with IMO model course 7:13.

1st January 2017 the IGF Code was made mandatory and STCW now includes new minimum requirements for the training and qualifications of personnel on ships subject to the IGF Code. This training program has been approved by the Norwegian Maritime Authority. The training consists of an e-learning course, practical assessment at a facility center and a classroom exam. When the training is completed a course diploma is issued. 

The practical training takes place at facilities located in various parts of Norway and abroad. Please choose the most convenient training for yourself or your employees. It is possible for our instructors to perform the practical assessment on the premises of a client. Should this be of interest please contact us on: post@gassteknikk.no

IGF Advanced Webinar

Lectures will be presented remotely. Participants need a PC/tablet with camera, mic, speaker, pen and paper for the lectures. After enrolment, participant will receive a personal information about the course and code for "log in" to Mintra TrainingPortal. Compendiums for use in the course can be downloaded from TrainingPortal. A personal code for joining the webinar will be sent by Mail.                            

Mandatory requirements for personal COP IGF Advanced:

After fulfilling the lectures (Remotely), participants will need sailing experience (PA) on an IGF vessel and documentation of 3 bunkering’s. They will need to collect the sailing experience after they have recived their IGF Basic certificate. See more info at our homepage: www.gassteknikk.com / IGF COP or NMA's hompage: https://sdir.no 

The aim of this training programme is to impart the initial training to enable trainee competence assessors, now referred to as learners, to acquire the necessary knowledge and skills which underpin the tasks to be performed as a Competence Assessor.

The objectives of this training are that learners will be able to:

(a) Understand the principals and corresponding roles and responsibilities involved in competence assessment

(b) Plan and carry out an assessment

(c) Monitor and verify assessment records

(d) Objectively review and assess different types of evidence

(e) Understand the importance of robust record keeping

(f) Deliver assessment feedback

The OPITO Competence Assessor Award delivered through Blended Learning requires the following:

Computer/Laptop

Webcam

Printer/scanner

The Blended Learning is delivered in Stages. Access to the e-learning modules are in My Training tab in the Training portal. Stage 1 & 2 are found in the OPITO Competence Assessor Award e-learning module 1. 

Stage 1 - Online registration 1 hour to complete

Stage 2- E-learning modules Self-study 5/6 hours recommended

Stage 3- Live instructor webinar and online test 1 full day (sessions run twice weekly)

Stage 4- Upon successful completion of the training, and with evidence that the skills and knowledge have been successfully applied in the workplace, the learner would be eligible to conduct workplace assessments, providing they themselves are technically competent in the discipline being assessed. Following this training, it will be the responsibility of the employing organisation to allow each assessor to gain further experience. 

Presentation 

This training course aims at providing a general description of the different types of lifting appliances that may be found on board ships and offshore units, their main characteristics and operating principles. It provides an introduction to the applicable rules and regulations related to lifting appliances. 

Objectives

On completion of the training, students will be able to: 

Get familiar with the various types of lifting appliances installed on board ships and offshore units. 

Know the regulations, which are relevant for inspection and certification of cargo gear, including international regulations and BV Rules. 

Understand the particularities of lifting appliances and the relevant requirements for the survey of materials and equipment.

Understand the scope of intervention for Cargo Gear in various stages – design, manufacturing and operation, including an overview of control and safety design requirements.

Program

Types of lifting appliances

Definitions

Derrick systems

Cranes

Typical crane types

Applicable Rules and Regulations

International Regulations and National Requirements

Bureau Veritas Rules, additional class notations and recognized standards

Bureau Veritas services

Cargo Gear Register Book

Design, Inspection, testing and surveys at works

Design acceptance criteria

Documents to be submitted

Inspection and testing

Steel wire ropes and fibre ropes

Loose gear

Winches

Survey of fitting on board

Overall tests prior to putting into service: Mandatory tests, overload test, testing at

Manufacturer’s test bench, inspections after testing

Marking

In-service surveys

Periodicity, scope and documentation

Guidelines for a thorough annual examination

Items to be tested: slew bearing, loose gear examination, ropes, hydraulic system

Control and safety devices

Thickness measurements, wear limits and criteria for replacement

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of Cargo Gear and Lifting Appliances, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Cargo Gear and Lifting Appliances is obtained after completion of the course and passing the online test. 

Presentation

This training course aims at providing a general description of the requirements for the prevention of pollution by sewage from ships as defined by the Annex IV of the MARPOL Convention.

Objectives

On completion of the training, students will be able to:

Understand the MARPOL requirements for prevention of sewage pollution from ships.

Know the various sewage treatment systems which are accepted by the MARPOL Convention.

Know the equipment required on board different ship types.

Understand the criteria defined in the convention for the control of discharge of sewage.

Understand the requirements for survey and certification of ships.

Program

Introduction

Applicability

Definitions

Equipment

Types of sewage systems

Sewage treatment plant

Holding tank

Sewage comminuting and disinfecting system

Standard discharge connection

The special case of livestock carriers

Discharge criteria

Discharge of sewage from ships other than passenger ships

Discharge of sewage from passenger ships outside special areas

Discharge of sewage from passenger ships within a special area

Survey and certification

International Sewage Pollution Prevention Certificate

Certificate entries: Number of persons the ship is certified to carry; New or existing ship; 

New or existing passenger ship for the application of Regulation 11.3

Survey requirements

Type Approval Certificate for sewage treatment plants

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of MARPOL Sewage Pollution, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of MARPOL Sewage Pollution is obtained after completion of the course and passing the online test.