Oil and Gas

Course catalogue

Category

Course type

Course provider

hits
631
Course code: MGM-030
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian
Price: NOK 1000,-

Who is this course for?
All personnel who are at risk for being exposed to benzene.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide learners with an awareness of benzene and provide best practice for work with benzene in oil and gas producing facilities.

How will this course benefit my company?
By ensuring you are aware of the impacts of benzene and familiar with best practice for work with benzene.

What standards are referred to in this course?
Norwegian Oil&Gas circulars NOG 130, 131&133
SOLAS - II/2/16.3.2
IMO circulars 1095 and 1220

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-035
Course type: E-learning course
Duration: 4 hours
Language: English
Price: NOK 2100,-

STCW Training programme for courses approved by the Norwegian Maritime Authority (NMA).

This training programme consists of three elements:

• This eLearning module (ETC: 45 minutes)

• Practical training onboard (ETC: 3 hours), and

• The final exam (ETC: 15 minutes) 

Please read through the Evaluation Procedure  for more information prior to starting the training programme

 

 

Who is this course for:
Any crew onboard without designated security duties.


Is previous experience required?
No previous experience is required to complete this course.


How will this course benefit me?
By ensuring that you have achieved the training requirements set out by the STCW Code.  This course will ensure that you are certified according to STCW A-VI/6-1.

How will this course benefit my company?
By ensuring you have the knowledge and are certified according to the STCW regulations.


What standards are referred to in this course?
STCW - Security Awareness, table A-VI/6-1

Is there an assessment?
The exam includes questions on the theory aspects covered during the initial eLearning AND the activities completed during the onboard assessment. You should not attempt the exam until you have completed both aspects of the training.

 

Certificate:

When the training is completed a certificate is issued by the Norwegian Maritime Authority.

The Norwegian Maritime Authority charge an additional fee to issue the formal STCW Certificate.

Course code: MGM-042
Course type: E-learning course
Duration: 40 minutes
Language: English
Price: NOK 600,-

Who is this course for?
Deck Officers and Deck Crew who are involved in using the Emergency Towing Systems (ETS)

Is previous experience required?
No previous experience is required to complete this course. 

How will this course benefit me?
This course aims to provide learners with an introduction to Emergency Towing Systems (ETS) in the Maritime Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all possible precautions are taken to reduce injury to personnel whilst using the ETS.


What standards are referred to in this course?

• The International Convention for the Safety of Life at Sea

• IMO resolution MSC. 35(63) 

• IMO Resolution MSC. 132(75)


Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: MUK-074
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

All personnel who work in the Oil & Gas industry in roles that are involved in oily discharges to sea.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

To provide learners with an awareness of the potential environmental impacts associated with oily discharges to sea, as well as the legislation and control measures that are in place to minimise these impacts.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel are aware of ways to safely remove oily discharges which will help to take care of the environment.

What standards are referred to in this course?

• Offshore Petroleum Activities (Oil Pollution Prevention and Control) OPPC Regulations 2005

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-063
Course type: E-learning course
Duration: 150 minutes
Language: English, Norwegian
Price: GBP 100,-

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

 

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MGM-033
Course type: E-learning course
Duration: 20 minutes
Language: English
Price: NOK 500,-

Course Goal: This course aims to provide an understanding of the duties and responsibility of a Ship Safety Officer and should be able to undertake the duties as a Ship’s Safety Officer or Safety Representative.

Who is the course for?

Any personnel taking on the duties of a Ship Safety Officer or Safety Representative including Ship Officers / HQSE Managers / Training Managers, and Engine and Deck Department Supervisors.

Is previous experience required?

Those eligible to perform duties as “Ship Safety Officer” or a “Safety Representative”, are limited to crew members who have no less than 2 years consecutive sea service since attaining the age of 18, which in the case of a safety representative on board a tanker shall include at least 6 months service on such a ship.

How will the course benefit me?

After successfully completing this course, and have the “Safety Officer – Checklist” completed and approved, you should be able to undertake the duties and responsibilities as Safety Officer, as defined in STCW Code 2010 Table A-II/2 and A-III/2. You will be a certified Safety Officer.

How will the course benefit my company?

Ensuring you are qualified and certified as a “Safety Officer”.

What standards are referenced in the course?

• MCA Code of Safe Working Practices for Merchant Seamen

• This Safety Officer course also covers relevant parts of STCW Code Tables A-II/2 and A-III/2 

• IMO Model Course 3.11.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: TQ_007
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: GBP 15,-

Written communications are a necessary part of a manager’s daily work. Whether responding to emails, composing performance reviews for team members, editing an industry report, or crafting a letter to a client, you probably spend a lot of time on writing. For some people, this work comes naturally, but for others, it can be a chore. Becoming a strong writer takes time and practice. But the benefits are worth the effort. As you improve, you’ll be able to structure and “sell” your ideas more easily and your messages will be better received. Let’s look at some fundamental guidelines you can use to make your writing more powerful and effective.

 

• Learn the importance of thinking before writing   

• Write conversationally     

• Use active voice in your sentences

 

Course code: MUK-112
Course type: E-learning course
Duration: 140 minutes
Language: English
Price: NOK 1500,-

Who is this course for?

All personnel who work with chemicals in the Oil and Gas Industry.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course provides learners with an in depth few on the use, management and control of chemicals in the Oil and Gas Industry and how to react in an emergency situation that has resulted from a chemical hazard.

 

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel have an in depth view of industry best practice for working with chemicals, which will in turn, help keep those working with chemicals safe.

 

What standards are referred to in this course?

• Offshore Petroleum (Oil Pollution Prevention and Control) Regulations

• The Control of Substances Hazardous to Health (COSHH)

• Regulation, Evaluation, Authorisation and Restriction of Chemicals (REACH)

• United Nations Globally Harmonized System of Classification and Labelling of Chemicals (GHS)

• EU Classification, Labelling and Packaging (CLP) Regulation

• The GB CLP Regulation

• The Norwegian CLP Regulation, or

• The Hazard Communication Standard (HCS 2012)

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-118
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is the course for?

All personnel who work in the maritime industry and would benefit from an awareness of the International Ship and Port Facility Security (ISPS) Code.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide an overview of the International Ship and Port Facility Security (ISPS) Code.

How will the course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of the International Ship and Port Facility Security (ISPS) Code, the security attacks that can occur at sea and how to act in an emergency situation.

What standards are referenced in the course?

International Convention for the Safety of Life at Sea (SOLAS)

The International Ship and Port Facility Security (ISPS) Code

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MUK-019
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 1000,-

Who is this course for?
Production operators.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

How will this course benefit my company?

By ensuring you have appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

What standards are referred to in this course?
This course does not refer to specific legislation or standards.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Hits per page
| 5 ... |