Oil and Gas

Course catalogue

Category

Course type

Course provider

hits
628
Course code: MTP-063-FT
Course type: E-learning course
Duration: 150 minutes
Language: English, Norwegian
Price: GBP 100,-

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

 

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

 

What standards are referred to in this course?

• Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE
• Standards of Training, Certification and Watchkeeping

 

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MUK-027
Course type: E-learning course
Duration: 20 minutes
Language: English
Price: NOK 500,-

Who is the course for?

All personnel who may be exposed to naturally occurring radioactive material (NORM) in the workplace.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will the course benefit me?

This course aims to provide an awareness of NORM and provide best practices for managing NORM in oil and gas producing facilities.

 

How will the course benefit my company?

The course will benefit companies by ensuring that all members of personnel have an awareness of NORM and how it should be managed, which will help to reduce workplace accidents.

 

What standards are referenced in the course?

There are no standards or regulations referenced in this course.

 

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80% with 2 attempts.


Accreditation:

CPD, IOSH. 

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Course code: MUK-002
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

Who is this course for?

All personnel who works in a role within the Oil and Gas Industry that may have a direct impact on the environment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to increase learners’ awareness of the environmental aspects and impacts related to the Oil and Gas Industry and the actions that can be taken to minimise environmental damage.

How will this course benefit my company?

This course will benefit a company by helping personnel become aware of actions that can be taken to reduce environmental damage.

What standards are referred to in this course?

BEIS (formally DECC))

Oil Spill Prevention and Response Advisory Group

Health and Safety Executive (HSE) 

ISO 14001 Environmental Management Systems

Is there an assessment?

Yes


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-021
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring knowledge or awareness of HAZID.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide all personnel with solid hazard identification awareness to enable them to evaluate hazards quickly and effectively so that they can carry out their duties as safely as possible.

 

How will this course benefit my company?

By ensuring you are able to evaluate hazards quickly and effectively so that you can carry out your duties as safely as possible.

 

What standards are referred to in this course?

• Offshore Installations (Offshore Safety Directive) Regulations

• Control of Major Accident Hazards Regulations

• Directive 2013/30/EU on Safety of Offshore Oil and Gas Operations

• Title 30 of the Code of Federal Regulations (30 CFR) on Mineral Resources

 

Is there an assessment?

Once you have completed the course, there is an assessment with a pass mark of 80% and 2 attempts.

Course code: MUK-029
Course type: E-learning course
Duration: 20 minutes
Language: English
Price: NOK 500,-

Who is the course for?

This is course is for those who work with and have an exposure risk to benzene. 

 

Is previous experience required?

No previous experience is required to complete this course. 

 

How will the course benefit me?

This course will benefit learners by providing them with an awareness of benzene and providing best practices for working with benzene in oil and gas producing facilities.

 

How will the course benefit my company?

The course will benefit companies by ensuring that all possible precautions are taken to reduce accidents or injuries resulting from benzene exposure.  

 

What standards are referenced in the course?

Control of Substances Hazardous to Health (COSHH) Regulations

OSHA, the Occupational Safety and Health Administration

 

Is there an assessment?

Yes 

 

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MTP-004
Course type: E-learning course
Duration: 90 minutes
Language: English, Norwegian
Price: GBP 120,-

Who is this course for?

This HSE Chemicals training course is for personnel who require an introduction to or awareness of working with chemicals in the oil and gas industry.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

The course is for all those who work with or can come in contact with chemicals. The course is also intended for those who work on a general basis with workplace environment issues, purchasing, or transportation. The course will give the target group fundamental knowledge of safe use of chemicals.

 

How will this course benefit my company?

By ensuring you have fundamental knowledge of the safe use of chemicals.

 

What standards are referred to in this course?

• REACH

• The Working Environment Act 

• The Product Control Act 

• The Pollution Control Act

• The Chemical Labelling Regulations

• Regulations relating to Organisation, Management and Participation

• The Internal Control Regulations

• Performance of Work Regulations

 

• The Product Control Regulations

 

Is there an assessment?

Yes

Course code: MTP-058
Course type: E-learning course
Duration: 8 hours
Language: English
Price: NOK 2100,-

Before enrolling, candidates must confirm access to a qualified Onboard Assessor holding:

  • STCW A-I/6 Onboard Assessor or Train the Trainer certificate
  • STCW A-VI/5 Ship Security Officer certificate 

Failure to meet the above requirements will result in the training not approved. 
STCW Training for courses approved by the NMA. 
Training includes:

  • eLearning (45 min)
  • Onboard practical training (7 hrs)
  • Final exam (15 min) 

Read through the Evaluation Procedure for information prior to the training programme.

Please note: The checklist must not be printed or stored as hard copies as the document may be updated at any time. You must use the checklist provided within the Onboard Exercises Module or your submission will be rejected.

Who is this course for:

This course is for those who are appointed to fulfil security duties, including anti-piracy and anti-armed robbery related activities on board a ship in accordance with the ship security plan.

Is previous experience required?

No previous experience.

How will this course benefit me?

This course will ensure that you are certified according to STCW A-VI/6-2.

How will this course benefit my company?

This course will ensure crew are certified according to STCW A-VI/6-2.

What standards are referred to in this course?

  • The International Convention for the Safety of Life at Sea (SOLAS)
  • The International Ship and Port Facility Security (ISPS) code
  • The International Safety Management Code (ISM)
  • The International Convention on Standards of Training Certification and Watchkeeping for Seafarers (STCW)
  • The International Maritime Organization (IMO)

Is there an assessment? 

Final exam (15 min)

Certificate:

Issued by The NMA which charge an additional fee.

Course code: MTP-015
Course type: E-learning course
Duration: 15 minutes
Language: English, Norwegian
Price: GBP 70,-

Who is this course for?

All relevant personnel.

 

Is previous experience required?

No experience is required to complete this course.

 

How will the course benefit me? 

Learners will gain knowledge about ergonomic principles that can help prevent musculoskeletal disorders, reduce the risk of injuries, and promote overall physical well-being.

 

How will the course benefit my company? 

Learners will be able to describe ergonomic principles that will help in creating safer work environments, reducing the risk of workplace injuries.

 

What standards are referenced in the course? 

• The Norwegian Working Environment Act

• The Regulations on Organisation, Management, and Participation

 

Is there an assessment? 

Yes

 

Learning Objectives:

• Explain what ergonomics is and its significance in the workplace

• Identify the correct ergonomic working techniques 

• Explain the importance of the environment in improving ergonomics

• Identify additional measures to improve ergonomics

• Recognise who is responsible for reducing workplace injuries

Course code: MUK-007
Course type: E-learning course
Duration: 25 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel who are involved in work processes that can result in hand-arm vibration exposure.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will benefit learners by making them aware of the risks of hand-arm vibration and the effects that it can cause.

How will this course benefit my company?

This course will benefit companies by ensuring that personnel have an understanding of the risks of hand-arm vibration and in turn will reduce the number of injuries that result from this.

Is there an assessment? 

Yes

Course code: MGM-030
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian
Price: NOK 1000,-

Who is this course for?
All personnel who are at risk for being exposed to benzene.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide learners with an awareness of benzene and provide best practice for work with benzene in oil and gas producing facilities.

How will this course benefit my company?
By ensuring you are aware of the impacts of benzene and familiar with best practice for work with benzene.

What standards are referred to in this course?
Norwegian Oil&Gas circulars NOG 130, 131&133
SOLAS - II/2/16.3.2
IMO circulars 1095 and 1220

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hits per page
| 4 ... |