Course catalogue

“Course on fall protection” is a course on the basics of fall protection for anyone working above ground.

This course outlines the laws and regulations related to fall protection. It contains information about active as well as passive protection gear, as well as first aid related to falls from a height. Upon completion of the course one will have information about the various aspects of fall protection. One will also learn how to carry out ones work in a safe and secure manner within the confines of the applicable laws and regulations.

Course Content

- Laws and regulations

- Active and passive fall protection

- First aid

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course provides drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

How will this course benefit my company?
By ensuring you have a basic understanding of the drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

Learning Objectives

- Explain what is meant by the term ‘Abrasive Wheel’

- Describe typical regulatory requirements for abrasive wheels

- Give examples of different types of abrasive wheels

- Explain how abrasive wheels operate

- Explain the importance of using guards during grinding operations

- Explain the requirements for portable and hand-held grinding machines

- Explain the main hazards of grinding operations

- Give examples of common problems faced when using abrasive wheels

- Explain what the PPE requirements are during grinding operations

- Identify the safety measures that must be in place during grinding operations

Who is this course for?

All employees at all levels of the organisation.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

Insufficient understanding of risk often leads to delayed projects, accidents and other unwanted incidents.

This course provides a basic understanding of what risk is, how it can be managed and how understanding risk helps us make better decisions.

How will this course benefit my company?

By ensuring you are aware and have a basic understanding of what risk is and how to manage risk. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

There is no exam upon completion of this course.

Fall protection is a course on the basics of fall protection for anyone working above ground.

This course outlines the laws and regulations related to fall protection. It contains information about active as well as passive protection gear, as well as first aid related to falls from a height. Upon completion of the course one will have information about the various aspects of fall protection. One will also learn how to carry out ones work in a safe and secure manner within the confines of the applicable laws and regulations.

This course provides an introduction to emergency first aid. After completing the course, users will feel secure enough in their knowledge to be able to take action in an accident situation by analyzing the situation and understanding the order in which to do what needs to be done.

Course Content

- Introduction

- Lifesaving first aid
- To call for help
- The important survey
- Stroke
- Cardiac Resuscitation
- Heart Disease
- Internal and external bleeding

The course is a management support and provides an introduction to Risk assessment, HSE regulations and Training requirements. The course is also helpful for everyone involved in the training of hazardous work equipment.
The course is intended to give participants an introduction to the HSE regulations, and requirements for training, especially relating to dangerous tools.

Course Goal: To increase learners’ awareness of the risks of hand-arm vibration and the effects that it can cause. The course also looks at the control measures that should be taken to reduce exposure to vibration, based on industry best practice.

Who is the course for?

All onshore and offshore personnel that use vibration-inducing equipment.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Learning objectives

LO1 Describe hand-arm vibration and the effects it can cause 

LO2 Explain what Hand-Arm Vibration Syndrome (HAVS) is and how to identify its early symptoms

LO3 Identify the types of jobs and equipment that are most likely to involve hand-arm vibration and expose workers to the risk of health effects

LO4 Explain the duties of employers under the Control of Vibration at Work Regulations

LO5 Outline the measures that employees can take to reduce the risk of HAVS

LO6 Outline the duties of equipment manufacturers and suppliers in reducing vibration risks

LO7 Describe the process of assessing the vibration risk to employees in accordance with the Exposure Action Value (EAV) and Exposure Limit Value (ELV)

LO8 Describe the control measures that should be taken to reduce exposure to vibration

LO9 Explain the importance of monitoring exposure to vibration, and health surveillance

LO10 Explain the importance of information and training in reducing the risks to health from vibration

COURSE DESCRIPTION

In a risk assessment,  potential events and consequences are considered. In this course, we focus on unwanted events such as failures and accidents. This could be, for example, a gas leak or afire at an oil platform, that equipment stops working during an operation in a hospital, or that an accident occurs during the execution of a work task. The risk analysis process consists of three phases:

1) Planning

2) Risk assessment

3) Risk management

This course shows how these phases can be planned and implemented in practice. There are many guidelines and standards on how a risk assessmentcan be carried out, and many are adapted to particular industries and professional areas. This course presents a general approach that can be used in most industries.

COURSE CONTENT

•Introduction:What is risk? What is the purpose of a risk assessments?

•Risk assessment and risk management:Description of the steps in a risk assessment, what is important to look out for in the various steps, and how the risk assessment can be applied in risk management.

•Risk analysis methods:There are numerous risk assessment methods that are suitable for looking at different issues. An introduction is given to some of these; Hazid/ course risk analysis, SJA, HAZOP, FMEA and QRA. It’s crucial to choose a method that is well adapted to the problem you are looking at.

STANDARDS REFERRED TO IN THIS COURSE

- ISO 31000:2018 Risk Management

HOW WILL THIS COURSE BENEFIT ME, AND MY COMPANY? 

After completing the course, participants should be able to understand what a risk assessment is and have knowledge of the relevant steps. Participants will also have basic knowledge of:

•Different risk analysis methods.

•Choice of risk analysis methods within the three main categories; simplified risk assessment, standard risk assessment and model-based risk assessment. 

•Typical pitfalls for planning and carrying out risk assessments.

•Understanding how risk assessments can contribute to decision support.

For more information and prices: 

http://www.hseacademy.com

learning@proactima.com

Phone: + 47 4000 1933

Who is this course for?
Newcomers to the Oil and Gas Industry

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide a brief overview of fire and safety systems

How will this course benefit my company?
By ensuring you have a brief overview of fire and safety systems.

What standards are referred to in this course?
Health and Safety at Work Act
The Management of Health and Safety at Work Regulations
The Regulatory Reform (Fire Safety) Order
The Fire (Scotland) Act

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The goal of this course is that all personnel who use hazardous work equipment, will gain good knowledge of HSE when using work equipment. The course deals with personnel requirements, roles and responsibilities, as well as accidents and regulations on safety.

In addition, the course requires that practical training is conducted on applicable work equipment.

The course covers the following topics:

• Work equipment in general

• Use of work equipment

• Selection of work equipment

• Training in the use of work equipment

• Workspaces and personnel requirements

• Risk assessment

• Safety, accidents and liability

• Direct and underlying causes of accidents

• Relevant laws and regulations

The course includes exercises, and final test with 30 questions.

The course provides knowledge about the structure, operation, applications and usage, maintenance and monitoring of the appropriate tool. The training provides knowledge about the requirements for safe use and operation stipulated in regulations and instructions.

Along with a practical review of the tools, the course meets the requirements for documented training in hazardous work equipment in Regulations concerning the Performance of Work.

The course covers the following subjects:

- Introduction to general HSE
- Angle grinder
- Hammer drills, jackhammers and combihammers
- Powder actuated gun
- Nail gun
- Saws with blade (includes table saw, crosscut and miter Saw, circular saw, jigsaw and reciprocating saw)
- Chain saw

Induction course in HSE is designed so that participants will have the first necessary expertise to ensure safety challenges in their daily work. This occurs in part through increased awareness of what is valuable and should be prioritized. The course also draws attention to the main framework governing the HSE The course is designed in order to create interest and motivation to work with HSE in the workplace.

Course contents

The course is divided into three topics:

-Care! - To take care of each other

-Terms and conditions - Laws, regulations and rules

-The challenging life - how to work without going wrong

Participants will

-Be motivated to work with safety in the workplace.

-Understand the relationship between a good safety work and preventing loss of important values such as life, health and nature in balance.

-Get an introduction to the main control elements of the HSE 

-Get advice on how they can work safely under time pressure and stress situations

Course provider: Proactima

The course covers the following topics:

- Act and Regulations
- Purpose
- Responsibility
- Participants and roles
- Internal control regulations

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

This course covers the theoretical part of the documented safety training required for slingers and signallers. The course is also suitable as a refresher for crane operators and other personnel who have previously completed training in lifting appliances and lifting gear. The course content deals with selection, control and safe use of the most common lifting gear used in construction, industry, shipping and offshore. Signalling, communication and controlling the load are key topics of the course.

In addition, the course requires that practical training is conducted on applicable work equipment.

The course contains 9 modules:

• Lifting equipment, expressions and acronyms
• Slinging, center of gravity, working angles and lifting tables
• Fibre slings
• Lifting gears of chain
• Wire rope slings
• Shackles
• Eye bolts, nuts and lifting lugs
• Signals and signs, and control of load
• Safety regulations for lifting operations

Induction course in HSE is designed so that participants will have the first necessary expertise to ensure safety challenges in their daily work. This occurs in part through increased awareness of what is valuable and should be prioritized. The course also draws attention to the main framework governing the HSE The course is designed in order to create interest and motivation to work with HSE in the workplace.

Course contents

The course is divided into three topics:

-Care! - To take care of each other

-Terms and conditions - Laws, regulations and rules

-The challenging life - how to work without going wrong

Participants will

-Be motivated to work with safety in the workplace.

-Understand the relationship between a good safety work and preventing loss of important values such as life, health and nature in balance.

-Get an introduction to the main control elements of the HSE 

-Get advice on how they can work safely under time pressure and stress situations

Course provider: Proactima

Who is the course for?

This course aims to provide an overview of the requirements for the safe handling of radioactive materials for personnel who work closely with it.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course provides learners with an awareness of the risks involved in working with radioactive materials.

How will the course benefit my company?

The course will benefit companies by ensuring that personnel understand the risks of working with radioactive materials and how to mitigate these risks.

What standards are referenced in the course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Du må ha gjennomført stillaskurs del 1 før dette kurset. 

Dette kurset er bygget på krav i Forskrift om utførelse av arbeid, kapittel 17, som omhandler montering, demontering og endring av stillas.
Forskriften krever opplæring for ulike stillashøyder:
-2-5 meter: 7,5 timer teori og 7,5 timer praksis
-5-9 meter: 15 timer teori og 15 timer praksis
-Over 9 meter: 36 timer teori og 72 timer praksis.

Dette kurset forutsetter at du har gjennomført stillaskurs del1. Til sammen dekker disse kursene kravene til teoretisk opplæring for stillas over til 9 meter, og tilsvarer kravene i Forskrift om utførelse av arbeid § 17-2 -17-4 om teoretisk opplæring.
I tillegg er det krav om 72 timer praktisk opplæring under tilsyn av kvalifisert person, ref Forskrift om utførelse av arbeid § 17-2 - 17-4.

Kursinnhold:
-Innledning
-Risiko ved arbeid i høyden
-Montering, endring og demontering
-Rør og kobling
-Vindkrefter, beregning for vindkrefter og forankring
-Sikkert arbeid i høyden, risikovurdering og fallsikring
-Diverse stillaskonstruksjoner
-Beregninger

Dersom du har gjennomført stillasopplæring (teorikurs) - og kan dokumentere nødvendig praksis i henhold til kravene i forskrift om utførelse av arbeid §§17-2, 17-3 og 17-4 - kan du bestille stillasbevis.

Klikk her for informasjon: https://www.eba.no/stillasbevis/

Requirements for training related to scaffolding are regulated by law and regulations. This course is based on the requirements of Regulations concerning the Performance of Work, Chapter 17, which is about assembly, dismantling and alteration of scaffolding.

-2-5 meters: 7.5 hours theory and  7.5 hours practical training
-5-9 meters: 15 hours theory and 15 hours practical training
-Over 9 meters: 36 hours theory and 72 hours practical training

This course covers the requirements of theoretical training for scaffolding up to 9 meters, and corresponds to the requirements of the Regulations concerning the Performance of Work, Section 17-2 and 17-3, on theoretical training. There is an additional requirement of 15 hours practical training if 5-9 meters. 

Course content:
-What is scaffolding
-Scaffolding and safety
-Risk assessment
-Forces and counter forces
-Structure of a scaffold
-Wind forces
-How to prevent accidents
-Mobile scaffold towers
-Haki scaffolding systems

Dersom du har gjennomført stillasopplæring (teorikurs) - og kan dokumentere nødvendig praksis i henhold til kravene i forskrift om utførelse av arbeid §§17-2, 17-3 og 17-4 - kan du bestille stillasbevis.

Klikk her for informasjon: https://www.eba.no/stillasbevis/

The course covers the following topics:

- Which companies should have a Working Environment Committee (AMU)?
- How to organize the a Working Environment Committee (AMU)?
- What is a Working Environment Committee (AMU)?

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.