Renewables

Course catalogue

hits
20
Course code: MUK-010
Course type: E-learning course
Duration: 35 minutes
Language: English
Price: GBP 40,-

Who is the course for?

All personnel who require an awareness of the hazards involved in working at height.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By increasing your awareness of the potential hazards of working at height and the steps that can be taken to reduce your risk of injury.

How will the course benefit my company?

This course is aligned to industry best practice and aims to make personnel aware of the potential hazards of working at height and the controls that can be implemented to reduce risk.

What standards are referenced in the course?

Work at Height Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accredidation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-022
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Who is this course for?

All personnel who may be exposed to asbestos at, or above, the permissible exposure levels, and personnel who perform housekeeping or maintenance operations in areas that have asbestos-containing materials and potential asbestos-containing materials.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide learners with an understanding of the hazards associated with exposure to asbestos.

How will this course benefit my company?

This course will benefit a company by ensuring learners have the knowledge to protect themselves from exposure to asbestos.

What standards are referred to in this course?

The Asbestos Industry Regulations 1931

Asbestos (Prohibitions) Regulations 1985

Control of Asbestos Regulations

The European Union’s directive

Is there an assessment?

Yes.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.


Course code: MUK-031
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: GBP 40,-

Who is this course for?

Personnel who work at a site or location where there is a risk that objects could fall from height.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

Dropped objects can cause serious injuries as well as damage to assets and equipment. This course will give you a basic understanding of the common causes of dropped objects, their potential consequences and how they can be prevented.

How will this course benefit my company?

By ensuring that personnel are aware of the risk dropped objects present, their common causes and how they can be prevented.

What standards are referred to in this course?

Occupational Safety and Health Act (USA)

Health and Safety at Work Act (UK)

Is there an assessment?

Yes


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.


Course code: MUK-027
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Who is the course for?

All personnel who may be exposed to Naturally Occurring Radioactive Material (NORM) in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide an awareness of NORM and provide best practices for managing NORM in oil and gas producing facilities.

How will the course benefit my company?

The course will benefit companies by ensuring that all members of personnel have an awareness of NORM and how it should be managed, which will help to reduce workplace accidents.

What standards are referenced in the course?

There are no standards or regulations referenced in this course.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-007
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: GBP 40,-

Who is this course for?

Personnel who are involved in work processes that can result in hand-arm vibration exposure.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will benefit learners’ by making them aware of the risks of hand-arm vibration and the effects that it can cause.

How will this course benefit my company?

This course will benefit companies’ by ensuring that personnel have an understanding of the risks of hand-arm vibration and in turn will reduce the number of injuries that result from this.

What standards are referred to in this course?

Health and Safety Executive (HSE)

Control of Vibration at Work Regulations

Supply of Machinery (Safety) Regulations

Is there an assessment?

Yes


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.


What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.


Course code: MUK-021
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring knowledge or awareness of HAZID.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide all personnel with solid hazard identification awareness to enable them to evaluate hazards quickly and effectively so that they can carry out their duties as safely as possible. 

 

How will this course benefit my company?

By ensuring you are able to evaluate hazards quickly and effectively so that you can carry out your duties as safely as possible. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-009
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: GBP 40,-

Who is this course for?

All personnel who could potentially be exposed to noise in the workplace. 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide personnel with the knowledge required to understand the hazards and controls associated with noise in the workplace.

How will this course benefit my company?

By ensuring personnel are aware of the hazards posed by noise in the workplace and the controls that should be put in place to minimise their exposure and reduce the risk of hearing loss.

What standards are referred to in this course?

Control of Noise at Work Regulations

Is there an assessment?

Yes

 

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 


What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.


Course code: MUK-018
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Who is this course for?

This course is aimed towards all personnel who use abrasive wheels in the workplace.


Is previous experience required?

No previous experience is required to complete this course.


How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.


How will this course benefit my company?

The course will benefit companies by providing personnel with knowledge of how to avoid risks and hazards when using abrasive wheels, subsequently reducing accidents and injuries in the workplace.


What standards are referred to in this course? 

• Provision and Use of Work Equipment Regulations (PUWER) 


Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-160
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Who is this course for?

Personnel requiring an awareness or understanding of the change management process.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of management of change. The course focuses on the steps of the management of change process, the roles and responsibilities of personnel, and the risks involved in change management and their associated control measures.

 

How will this course benefit my company?

By ensuring you have an overview of the management of change process.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-008
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: GBP 40,-

Who is the course for?

All personnel who are at risk from slips, trips and falls.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

How will the course benefit my company?

This course will benefit companies’ by reducing slip, trip and fall injuries among personnel.

What standards are referenced in the course?

Health and Safety at Work Act

Management of Health and Safety at Work Regulations

Workplace (Health, Safety and Welfare) Regulations

Health and Safety Executive (HSE)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.


Course code: MUK-138
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: GBP 40,-

Who is this course for?

All personnel who work in a role within the Oil and Gas Industry that may have an impact on the environment.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course aims to provide an introduction to the issues involved with successful environmental management in the Oil and Gas Industry.

 

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of the issues involved with successful environmental management in the Oil and Gas Industry, which will help to protect the environment.

 

What standards are referred to in this course?

• Department of Energy and Climate Change (BEIS (formally DECC))

• The Scottish Environment Protection Agency (SEPA) in Scotland

• The Environment Agency (EA) in England, Wales and Northern Ireland

• ISO 14001 Environmental Management Systems (EMS)

• British Standard Institute's BS7750 - Specification for Environmental Management Systems (BS11994)

• Integrated Pollution Prevention and Control (IPPC) Directive

• Control of Major Accident Hazards (COMAH) Regulations

 

Is there an assessment?

No

Course code: MUK-007N
Course type: E-learning course
Duration: 45 minutes
Language: Norwegian
Price: NOK 500,-

Course Goal: To increase learners’ awareness of the risks of hand-arm vibration and the effects that it can cause. The course also looks at the control measures that should be taken to reduce exposure to vibration, based on industry best practice.

 

Who is the course for?

All onshore and offshore personnel that use vibration-inducing equipment.


Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Learning objectives

LO1 Describe hand-arm vibration and the effects it can cause 

LO2 Explain what Hand-Arm Vibration Syndrome (HAVS) is and how to identify its early symptoms

LO3 Identify the types of jobs and equipment that are most likely to involve hand-arm vibration and expose workers to the risk of health effects

LO4 Explain the duties of employers under the Control of Vibration at Work Regulations

LO5 Outline the measures that employees can take to reduce the risk of HAVS

LO6 Outline the duties of equipment manufacturers and suppliers in reducing vibration risks

LO7 Describe the process of assessing the vibration risk to employees in accordance with the Exposure Action Value (EAV) and Exposure Limit Value (ELV)

LO8 Describe the control measures that should be taken to reduce exposure to vibration

LO9 Explain the importance of monitoring exposure to vibration, and health surveillance

LO10 Explain the importance of information and training in reducing the risks to health from vibration

Course code: MUK-030
Course type: E-learning course
Duration: 35 minutes
Language: English
Price: GBP 40,-

Who is this course for?

Any personnel who require an awareness of human factors.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course aims to introduce learners to the concept of human factors and how they impact situational awareness.

 

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel have an understanding of the human factors that can affect their situational awareness, resulting in reduced accidents and injuries.

 

What standards are referred to in this course?

No standards or regulations are referenced in this course.

 

Is there an assessment?

No

Course code: MUK-142
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: GBP 40,-

Who is this course for?

Personnel requiring an awareness or understanding of flare systems.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course provides an overview of flare systems.

 

How will this course benefit my company?

By ensuring you have an overview of flare systems.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-141
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: GBP 40,-

Who is this course for?
Newcomers to the Oil and Gas Industry

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide a brief overview of fire and safety systems

How will this course benefit my company?
By ensuring you have a brief overview of fire and safety systems.

What standards are referred to in this course?
Health and Safety at Work Act
The Management of Health and Safety at Work Regulations
The Regulatory Reform (Fire Safety) Order
The Fire (Scotland) Act

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-136
Course type: E-learning course
Duration: 15 Minutes
Language: English
Price: GBP 40,-

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide all relevant personnel with an overview of the safety precautions to be taken when working on electrical equipment

 

How will this course benefit my company?

By ensuring you have an overview of the safety precautions to be taken when working on electrical equipment

 

What standards are referred to in this course?

Health and Safety at Work Act (1974)

Electricity at Work Regulations (1989)

Management of Health and Safety at Work Regulations (1999)

Electricity at Work Safe Working Practices (2003)

Offshore Electricity and Noise Regulations (1997) 

Provision and Use of Work Equipment Regulations (1998)

BS 7671: 2008 Requirements for Electrical Installations

Offshore Installations (Safety Case) Regulations 2005 

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%

Course code: MUK-123
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: GBP 40,-

Who is the course for?

This course aims to provide an overview of the requirements for the safe handling of radioactive materials for personnel who work closely with it.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course provides learners with an awareness of the risks involved in working with radioactive materials.

How will the course benefit my company?

The course will benefit companies by ensuring that personnel understand the risks of working with radioactive materials and how to mitigate these risks.

What standards are referenced in the course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-143
Course type: E-learning course
Duration: 30 Minutes
Language: English
Price: GBP 40,-

"Who is this course for?

Personnel requiring awareness or understanding of gas detection and measurement methods.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide information about the types of gases found in the oil and gas industry and how these gases are detected and measured

 

How will this course benefit my company?

By ensuring you have  information about the types of gases found in the oil and gas industry and how these gases are detected and measured

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. "

Course code: MUK-065
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: GBP 40,-

Who is this course for?

Trainee Oil and Gas Operations Technicians and Maintenance Personnel

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of the Heating, Ventilation and Air Conditioning (HVAC) system

 

How will this course benefit my company?

By ensuring you have an overview of the Heating, Ventilation and Air Conditioning (HVAC) system

 

What standards are referred to in this course?

Minimum Efficiency Reporting Value (MERV)

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-119
Course type: E-learning course
Duration: 1 hour
Language: English
Price: GBP 80,-

Who is this course for?

Personnel requiring an awareness or understanding of (Material) Safety Data Sheets ((M)SDS) for chemicals.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of the structure and information contained in Safety Data Sheets.

 

How will this course benefit my company?

By ensuring you have an overview of Safety Data Sheets and how your role may require to understand certain information contained in the sheets.

 

What standards are referred to in this course?

Chemicals (Hazard Information and Packaging for Supply) Regulations 2009

CLP Regulation

REACH Regulation

Control of Substances Hazardous to Health (CoSHH) Regulations

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Hits per page