Course catalogue

Who is this course for:
This course is for users of scaffolding as a work platform in accordance with § 17-5 in ‘Regulations concerning the Performance of Work’.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
By providing you with a good understanding of the principles to do with the construction, functioning, maintenance and use of scaffolding, so that incidents and accidents can be avoided.

How will this course benefit my company?

By making scaffolding users aware of responsibility, legislation, safe use of scaffolding, assembly, and the scaffolding types.

What standards are referred to in this course?
§ 17-5 in ‘Regulations concerning the performance of work’

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This HSE Chemicals training course is for personnel who require an introduction to or awareness of working with chemicals in the oil and gas industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

The course is for all those who work with or can come in contact with chemicals. The course is also intended for those who work on a general basis with workplace environment issues, purchasing, or transportation. The course will give the target group fundamental knowledge of safe use of chemicals.

How will this course benefit my company?

By ensuring you have fundamental knowledge of the safe use of chemicals.

What standards are referred to in this course?

• REACH
• The Working Environment Act
• The Product Control Act
• The Pollution Control Act
• The Chemical Labelling Regulations
• Regulations relating to Organisation, Management and Participation
• The Internal Control Regulations
• Performance of Work Regulations
• The Product Control Regulations

Is there an assessment?

Yes

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The e-learning course, “Fire Prevention during Hot Work”, has been quality controlled by the Norwegian Fire Prevention Association and designed is to satisfy the requirements set by the insurance industry.

The course aims to reduce the number of fires caused by hot work and improve knowledge about the risk of fire during hot work.

Please Note! 

Before we can inform the Norwegian Fire Prevention Association that you have completed the course, we must receive within 3 months of completing the e-learning a confirmation that you have received fire extinguishing training during the last two years. Please send the proof of the practical training to: learningcentre@mintra.com.

Mintra requires proof of practical completion prior to issuing the Norwegian Fire Protection Association certificate.

Participants who pass the course will be issued a certificate from the Norwegian Fire Prevention Association. The certificate must be renewed every 5 years.

All certificates will by default be sent in a digital app to a mobile phone number, no longer a plastic card. The digital certificate is included in the course fee.
If a plastic card is required, an extra fee at NOK 450 will be added to the course fee to cover our cost.

You will be required to confirm your identity online before starting this course. In Trainingportal, we have implemented a fully automated process to make this a quick and painless experience.

Course Contents

The course focuses on duties and responsibilities during hot work and is divided into the following topics: 

- Hot work
- Regulations
- Fire theory
- Extinguishing fires
- Dangers of hot work
- Risk identification and preventive measures
- Documentation of safety
- If a fire starts

Who is this course for?

This HSE Introduction course is for all personnel who require an introduction to or awareness of HSE roles, responsibilities and duties in Norway.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

Health, safety and environment (HSE) considerations are vital to every organisation. Moreover, HSE requirements in the workplace are laid down in a range of laws, regulations and guidelines.

The employer has the primary responsibility for providing a suitable, safe working environment – and for ensuring sufficient training. This course aims to provide you with the baseline knowledge to be able to manage HSE challenges in your daily work.

How will this course benefit my company?

By ensuring you have sufficient knowledge of relevant HSE requirements, laws, regulations, guidelines and best practice.

What standards are referred to in this course?

NA

Is there an assessment?

Yes

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.