Course catalogue

Kurset gir en grunnleggende innføring i høytrykkslanger og kuplinger og er et naturlig grunnlag for drifts- og vedlikeholdspersonell som skal foreta inspeksjon og vedlikehold på høytrykksutstyr der slanger inngår som kritiske faktorer i systemet.

Kunne utføre forebyggende inspeksjoner og vedlikehold i henhold til etablerte prosedyrer og leverandørens bruksanvisninger, kunne registrere uregelmessigheter som f.eks høy temperatur, lekkasjer i slanger og kuplinger.

Hensikt:

Etter kurset skal deltagerne ha tilegnet seg kunnskap om høytrykkslanger og kuplinger for å kunne foreta visuell inspeksjon og kontroll for å ivareta sikkerheten, avdekke eventuelle lekkasjer slik at uønskede hendelser ikke oppstår.

Innhold:

Standarder og retningslinjer ( TR 1803 )

Merking og dokumentajon 

Sikkerhetskrav / HMS ved bruk av slanger og kuplinger 

Tabeller for slanger og kuplinger med oppbygning og forståelse 

Inspeksjon og kontroll av slanger

Definisjoner

Bruk av Hose, Dats Sheet

Vedlikeholdskonsept for slanger og kuplinger

Visuel inspeksjon. Gjenger, kuplinger og slanger

 Feil- og degraderingsmekanismer

 Slangelære inkl. Installasjonsgeometri

 Håndtering og oppbevaring av slanger

This course is only available in Norwegian.

Objective: The purpose of the training is to provide the prospective winch operator with a good theoretical basic training in the safe use of winches with associated equipment.

The training gives participants good insight into the principles of electric, pneumatic and hydraulically driven winches' design, operation, use and maintenance, so that accidents in connection with winch operations are avoided.

Content:

• Introduction

• Construction and operation

• Name of components

• Certification, marking

• Coil devices, safety equipment

• General safety rules and emergency procedures

• Correct and incorrect use of winches

• Restrictions on use

• Inspection, maintenance and disposal rules for winches, wire ropes, blocks, etc.

• Theoretical exam

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

- Global Wind Organization (GWO)

- Labor Inspection (Regulations)

Competence for "Working at heights" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Presentation

This training course provides a general overview of the requirements of the International Load Lines Convention and the conditions of assignment of load lines.

Objectives

On completion of the training, students will be able to:

Know the general requirements of the International Load Lines Convention and understand the conditions of assignment of load lines.

Know the different types of surveys; understand the scope of each survey and the certificates, records and documents associated with the Load Lines Convention.

Know the most common deficiencies and PSC detainable items in connection with the Load Lines Convention.

Program

History of Load Lines Convention

Purpose of the Convention

Definitions

Freeboard calculation

Load line marks

Conditions of assignment

o Information to be supplied to the Master

o Doors

o Cargo and other hatchways

o Machinery space openings and miscellaneous openings

o Ventilators and air pipes

o Scuppers, inlets and discharges

o Scuttles and windows

o Freeing ports

o Protection of crew

o Special conditions of assignment for Type A ships

Special requirements for ships assigned with timber freeboards

Certificates, records and other documents

Scope of Load Line surveys

o Initial survey

o Annual survey

o Renewal survey

Common PSC deficiencies related to Load Lines

o PSC statistics

o Detainable deficiencies

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Load Lines, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Load Lines is obtained after completion of the course and passing the online test.

Presentation

This training course provides a general overview of the MARPOL requirements concerning the protection against oil pollution from cargo spaces of oil tankers.

Objectives

On completion of the training, students will be able to:

Understand the MARPOL requirements for the prevention of oil pollution from cargo spaces of oil tankers.

Get familiar with the pollution prevention equipment required by the MARPOL Convention.

Know the requirements for survey and certification of oil tankers.

Program

Segregated ballast tanks

Double hull and double bottom

Pump-room bottom protection

Subdivision and stability

Slop tanks

Pumping, piping and discharge arrangements

Oil discharge monitoring and control system

Oil/water interface detector

Crude oil washing system

Control of discharge of oil

Oil record book part II

Ship-to-ship transfer

Survey and certification, type-approval certificates

Different survey types

Certificate

On completion of the training program, the student will be awarded:

A Certificate of MARPOL Oil Pollution from Cargo Spaces, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of MARPOL Oil Pollution from Cargo Spaces is obtained after completion of the course and passing the online test.

Presentation

This training course composed of 4 modules provides an overview of the Polar Code. It includes a general presentation of the Polar Code, the certification process, the safety requirements and the environmental protection requirements.

Objectives

On completion of the training, students will be able to:

Understand the main sources of hazards associated with the operations in polar waters and be familiar with the general principles, structure and philosophy of the Polar Code.

Know the main steps of the certification process, the operational assessment methodologies used to establish the operational limitations in ice operations, the requirements and contents of the Polar Water Operational Manual, and the survey and certification requirements.

Have a general understanding of the safety requirements concerning ship’s design and construction, machinery installations, safety equipment and fire protection, safety of navigation and communication equipment.

Get familiar with the requirements for operations in polar waters and training of crew.

Understand the Polar Code requirements for protection against oil pollution, NLS pollution, sewage pollution and garbage disposal.

Program

Module 1 – The Code

Introduction

Regulatory framework

The Polar Code

Module 2 – Certification Process

Certification overview

Operational assessment

Polar Water Operational Manual

Surveys and Certification

Polaris

BV Rules 

Module 3 – Safety Requirements

What does the Polar Code mean for safety?

Design and Construction

Equipment

Fire protection

Life-saving appliances

Operations and manning 

Module 4 – Environmental protection

How the Polar Code protects the environment?

Pollution prevention

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of Polar Code, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Polar Code is obtained after completion of the course and passing the online test.

Kurset starter med fellesteori som er en grunnleggende innføring i aktuelle lover og forskrifter og en grunnleggende innføring i sikker bruk av arbeidsutstyr. Fagdelen vil gi eleven en god teoretisk grunnopplæring i sikker bruk av masseforflyttingsmaskiner samt en god innsikt i oppbygging, virkemåte, vedlikehold og bruk.

Eleven skal gjennomføre teorimodul 1.1 (8 timer), modul 2.1 (24 timer) og  3.1 (8 timer). Dette skal gi førerne en god generell grunnopplæring i sikker bruk og praktisk forståelse for prinsippene for masseforflytningsmaskiner.

Kurset gjennomføres over 5 dager, og avsluttes med en teoretisk prøve.

Etter bestått teoretisk prøve og gjennomført grunnleggende praktisk bruk modul 3.1 + praksiskjøring 32 timer, kan praktisk prøve gjennomføres. Bestått praktisk prøve vil være grunnlag for utstedelse av kompetansebevis for fører av masseforflyttingsmaskin i valgt klasse.

Kursinnhold

- Konstruksjon

- Oppbygging

- Betjening

- Bruksegenskaper

- Bruksområder

- Sikkerhetsutstyr

- Viktige kontrollpunkter

- Vedlikehold


This course in only available in Norwegian.

Hovedmålet med kurset er at den som gis opplæring tilegner seg tilstrekkelige kunnskaper om sikker bruk av personløftere, slik at ulykker ved bruk unngås.

Regelverksreferanse:

F-2699 Statoil rev.

The course is in accordance with NS-EN 1591-4 and undergoes the same course content as an ordinary four-day course but without the use of hydraulic torque tool and tensioning tools.

The use of a mechanical torque wrench is the main focus but also a review of procedures, flanges, gaskets, practical tasks and more.

The course ends with a theoretical and practical exam. If passed, the approval is valid for 5 years.

Courses are conducted in Stavanger or Bergen
and is carried out on request.

Course price NOK 5300, - pr. participant.

Hensikt: Grunnleggende overlevelsestrening for offshore vindindustri. 

Ved gjennomføring av Global Wind Organization (GWO) Basic Safety Training (BST) vil delegatene ha en bevissthet om farene som oppstår når de arbeider i vind-industrien og hvordan man kontrollerer og reduserer disse farene.

Kursdeltakerne vil få (repetert) kunnskap og ferdigheter til å anerkjenne fordeler og begrensninger knyttet til livreddende utstyr og PVU samt korrekt bruk av dette i forbindelse med offshore vind. 

Hensikten med kurset er å gi deltakerne kunnskaper/oppfriskning om livreddende utstyr, GMDSS og SAR utstyr, hvordan en kollektivt kan øke sjansen til overlevelse i en nødsituasjon, hvordan entre og forlate vindturbiner, samt evakuering i nødsituasjoner. 

Kurset dekker krav til opplæring av personell og repetisjonskurs både land- og havvind iht:

- Global Wind Organization (GWO)

- Arbeidstilsynet (Forskrifter)


Kompetanse for «Sea Survival» skal vedlikeholdes iht. retningslinje i GWO standarden. Det skal gjennomføres repetisjonskurs hvert 2. år.

This course is only available in Norwegian.

Objective: The purpose of the training is to provide users of work equipment mentioned in § 10-1 and 10-3 in «Regulations on the performance of work» (no. 1357), a good general basic training in the safe use of work equipment, so that accidents and accidents in connection with use is avoided.

The authorities set requirements for basic safety certification of persons who are to drive forklifts, mass transfer machines and cranes. The requirements include both theoretical and practical training. To complete the common theory, one must take and pass a theoretical exam.

Module 1.1 Working environment, responsibilities and consequences are common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, you can start right on module 2.3.

Content:

- Laws and regulations
- Working environment, responsibilities, and consequences
- Environmental
- Safety regulations
- Dangerous goods, marking and handling

Hensikt:

Målsetting med opplæring er at den som gis opplæring tilegner seg tilstrekkelig kunnskap om metoder for å lede og veilede løfteoperasjoner slik at de blir forskriftmessig utført.

Opplæringen gir også kunnskap om farer forbundet med løfteoperasjoner samt bruk av risikokartlegging.

Kurset gir deltakere kunnskap til å kunne utøve overordnet operasjonell ledelse av løfteoperasjoner. Med det menes å kunne planlegge, risikokartlegge og evaluere, samt forebygge ulykker. Videre vil deltaker også tilegne seg kunnskaper om å gjøre rede for materialhåndteringsplan, oppbevaring og bruk av utstyr.

Målsetting med opplæring er at den som gis opplæring tilegner seg tilstrekkelig kunnskap om metoder for å lede og veilede løfteoperasjoner slik at de blir forskriftmessig utført.

Innhold:

• Krav og ansvar til rollen operasjonelt ansvarlig

• Lover, forskrifter, standarder og retningslinjer som gjelder vedr. bruk av løfteutstyr

• Overordnet operasjonell ledelse av løfteoperasjoner

• Helhetlig planlegging av løfteoperasjoner

• Risikokartlegging

• Identifisering av og etablering av barrierer. Gjennomføring og evaluering av en løfteoperasjon

• Informasjonsutveksling

• Krav for oppbevaring av løst løfteutstyr

• Krav for ulike typer løfteutstyr

• Krav til fadder, praksis og sensor

• Avsluttende prøve

This course is made for personell envolved in design, planning, projecting, installation and maintenance on electrical installations and equipment offshore. 

The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.

Objective: The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.

Content:

- An easy to understand overview and explanation of the committees/regulations/standards and how they are intertwined. 

- Presentation of the regulations and norms: PTIL 5 HMS, Nek 410 (IEC 60092), Nek 420 (IEC 60079), ATEX directives including standards and the Norsok series. 

- The structure and history of the IEC 61892 series, and the scope and application. 

- By using a fictive, illustrated installation, we will focus on the practical elements covered in the following standards: 

o IEC 61892-1 - General requirements and conditions 

o IEC 61892-2 - System Design 

o IEC 61892-3 – Equipment 

o IEC 61892-4 – Cables 

o IEC 61892-6 – Installation 

o IEC 61892-7 – Hazardous areas

This course is only available in Norwegian.

Objective: The aim of the training is that those who are given training are given the opportunity to acquire theoretical and practical knowledge about fall protection and the correct use of rescue equipment, rescue of free-hanging persons, rescue of personnel over open sea, tank, stretcher transport, descent and treatment of personnel after fall accident.

The training is adapted for personnel who are part of fall protection / rescue teams on board an installation, but also for personnel who want a basic understanding of a rescue operation, evacuation equipment after a fall accident when using fall protection / rescue equipment.

The course runs over 3 days (24 hours)

Repetition 2 every year in accordance with NOG 113 and SFS.

Content:

- Introduction
- Regulations, guidelines
- Best practice
- Risk assessment
- Fall protection equipment
- Use of personal protective equipment
- Knowledge of different equipment and methods
- The equipment's limitations and possibilities
- Requirements for maintenance, storage and control
- Consequences of falls

Practical and theoretical review of rescue exercises

- Planning and risk assessment of rescue
- Basic first aid
- Rescue operation w / fresh air equipment
- Rescue of a hanging person
- Rescue from tanks / cramped spaces
- Rescue over open sea
- Descent / hoisting of person
- Stabilization of person
- Knowledge of hanging trauma

Objective: The aim of the training is that theoretical and practical knowledge about fall protection and the correct use of rescue equipment, rescue of free-hanging persons, rescue of personnel over open sea, tank, stretcher transport, descent and treatment of personnel after fall accident is refreshed and repeated.

The training is adapted for personnel who are part of fall protection / rescue teams on board an installation. Participants must gain expertise in risk assessment, rescue (equipment and methods) and first aid.

Covers repetition requirements every 2nd year in accordance with NOG 113 and SFS.

Content:

Introduction
Regulations
Review of accidents and incidents
The rescue service
Equipment
Routines when working at height
Risk assessment
Management, site of injury
Stress and stress management
Hanging trauma, CPR
Rescue drills
Evaluation

The Norwegian authorities require that employees who use lifts (personnel lifts) must be able to document practical and theoretical training in their use. The employer is responsible for ensuring that employees receive the necessary training. (“Regulations regarding the execution of work” no. 1357, section 10-2 Requirements regarding documented safety training in the use of work equipment.) The course provides a basic theoretical and practical introduction to the safe use of lifts (personnel lifts). A certificate of competence is issued to participants in order to fulfil the legislation’s documentation requirements.
Objective: To provide course participants with increased knowledge and awareness of safety measures in order to avoid injuries and accidents at the workplace. 

The following topics are covered:
– Assembly
– Operation
– User qualities
– Areas of use
– Maintenance and control
– Safe use and servicing
– Classes A, B and C
– Accidents
– Legislation and regulations

Hytorc provide fundamental courses in flange work.
An important aspect of our operation is rooted in courses and training in flange work and bolted connections. We have been involved in the development of courses since OLF started their Gasslekasjeprosjekt (Gas-leakage project) in 2003, up until the updated requirements per NS-EN 1591-4 as of today.

Content:

The industries requirements in regards to training has provided improvements in the form of decrease in amounts of leakages both offshore and onshore. The executive operator gains better understanding and enhanced competence which further results in a safer work environment.

The fundamental course in flange work spans over 4 days, covering both theoretical- and practical training. Examination on both the theoretical and practical work will be conducted. Upon successful completion of the exams, a course certificate will be awarded. This certificate is valid for 5 years. To extend the validation of the certificate, a one-day refresher course must be completed before the expiration date of the certificate (within 5 years).
The refresher course prolongs the validity of the certificate for another 5 years upon completion.

The primary goal of the course is to provide necessary and required training which enables the individual to conduct independent work on flanges and bolted connections.

The course offers the attendees fundamental knowledge, inter alia:

-          Flanges

-          Clamps

-          Bolts and lubrication

-          Gaskets

-          Work Procedures

-          Understanding and safe use of hydraulic tools, torque wrench and equipment

-          Associated documents

The course is set up on request.

Grunnleggende teoretisk og generell sikkerhetsopplæring i trykktesting iht. Forskrift om utførelse av arbeid best. 703.

Kursinnhold

- Trykk og testmedier

- Materiallære

- Bolter og skruer

- Kontroll og vedlikehold

- Gjenger og koblinger

- Sikkerhet

- Høytrykkspumper og boosterpumper

- Slanger

- Valg av testutstyr

- Prosedyrer

- Måleenheter/tabeller

- Arbeidsmiljø

- Avsluttende teoretisk prøve

The course "Hose assembly – safe appliances" provides a basic introduction to the safe use of hoses and selection of fittings for different applications. Furthermore, the course focuses on the identification of fittings, as well as basic practical training in hose assembly.

After the course, participants will be able to use the hose assembly equipment in a way that maintains a safe and appropriate work process. The course is divided into a theoretical and a practical part and is concluded with a written certification test. The course is conducted according to the standard TR 1803 and Oil and Gas United Kingdom Standard.

Objective: Through a combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in enclosed spaces.

The Norwegian Labor Inspection Authority has made major changes to the regulations. People who work in tanks and closed rooms are the biggest difference that the regulation "Work in tanks" has fallen away. This is replaced by section 29 of the regulations «execution of work», which states that all work in closed rooms shall be performed «without danger to life or health». A simple requirement that gives the employer a great deal of responsibility.

New SOLAS requirements: Exercises in closed rooms and rescue, as well as portable gas measuring equipment.

Applies to: All ships covered by SOLAS and all high-speed vessels, mobile offshore drilling units and dynamically positioned vessels

Our courses are in accordance with SOLAS-IMO requirements and the Norwegian Labor Inspection Authority - Execution of work

The definitions of a cramped space vary from country to country, but the usual criteria usually include:

- A room that is predominantly or completely closed
- Contains health and / or safety hazards
- Is not designed for continuous stay of employees
- Has entrances or exits that are small or difficult to access
- A room that is large enough that you can enter it completely and perform the work tasks you have been assigned
- Limited air circulation

Content:

- Review of public laws and regulations
- Know which constituents a safe breathing air contains
- How to make a gas measurement before entering
- Plan entry jobs and rescue operations in closed rooms
- Equipment knowledge
- Exercises in our training tank. We practice entry and use of fall protection equipment, rescue equipment, breathing air equipment and gas meter