Oil and Gas

Course catalogue

hits
414
Course code: HYT-001
Course type: Classroom course
Duration: 4 days
Language: English
Price: From NOK 14500,-

Hytorc provide fundamental courses in flange work.
An important aspect of our operation is rooted in courses and training in flange work and bolted connections. We have been involved in the development of courses since OLF started their Gasslekasjeprosjekt (Gas-leakage project) in 2003, up until the updated requirements per NS-EN 1591-4 as of today.

Content:

The industries requirements in regards to training has provided improvements in the form of decrease in amounts of leakages both offshore and onshore. The executive operator gains better understanding and enhanced competence which further results in a safer work environment.

The fundamental course in flange work spans over 4 days, covering both theoretical- and practical training. Examination on both the theoretical and practical work will be conducted. Upon successful completion of the exams, a course certificate will be awarded. This certificate is valid for 5 years. To extend the validation of the certificate, a one-day refresher course must be completed before the expiration date of the certificate (within 5 years).
The refresher course prolongs the validity of the certificate for another 5 years upon completion.

The primary goal of the course is to provide necessary and required training which enables the individual to conduct independent work on flanges and bolted connections.

The course offers the attendees fundamental knowledge, inter alia:

-          Flanges

-          Clamps

-          Bolts and lubrication

-          Gaskets

-          Work Procedures

-          Understanding and safe use of hydraulic tools, torque wrench and equipment

-          Associated documents

The course is set up on request.

Course code: TES-001
Course type: Classroom course
Duration: 1 day
Language: English
Price: From NOK 2950,-

The course "Hose assembly – safe appliances" provides a basic introduction to the safe use of hoses and selection of fittings for different applications. Furthermore, the course focuses on the identification of fittings, as well as basic practical training in hose assembly.

After the course, participants will be able to use the hose assembly equipment in a way that maintains a safe and appropriate work process. The course is divided into a theoretical and a practical part and is concluded with a written certification test. The course is conducted according to the standard TR 1803 and Oil and Gas United Kingdom Standard.

Course code: STQ-009
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 9990,-

Objective: Through a combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in enclosed spaces.


The Norwegian Labor Inspection Authority has made major changes to the regulations. People who work in tanks and closed rooms are the biggest difference that the regulation "Work in tanks" has fallen away. This is replaced by section 29 of the regulations «execution of work», which states that all work in closed rooms shall be performed «without danger to life or health». A simple requirement that gives the employer a great deal of responsibility.

New SOLAS requirements: Exercises in closed rooms and rescue, as well as portable gas measuring equipment.

Applies to: All ships covered by SOLAS and all high-speed vessels, mobile offshore drilling units and dynamically positioned vessels

Our courses are in accordance with SOLAS-IMO requirements and the Norwegian Labor Inspection Authority - Execution of work

The definitions of a cramped space vary from country to country, but the usual criteria usually include:

- A room that is predominantly or completely closed
- Contains health and / or safety hazards
- Is not designed for continuous stay of employees
- Has entrances or exits that are small or difficult to access
- A room that is large enough that you can enter it completely and perform the work tasks you have been assigned
- Limited air circulation


Content:

- Review of public laws and regulations
- Know which constituents a safe breathing air contains
- How to make a gas measurement before entering
- Plan entry jobs and rescue operations in closed rooms
- Equipment knowledge
- Exercises in our training tank. We practice entry and use of fall protection equipment, rescue equipment, breathing air equipment and gas meter

Course code: STQ-013
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 9490,-

Objective: The main goal is to provide personnel who are to perform the roles of signal transmitter, signalers and deck operator with sufficient knowledge of handling and transport of dangerous goods and hazardous waste, to be able to identify hazards and risks when handling this type of cargo, in such a way that unwanted incidents are avoided.


Safe handling and transport of dangerous goods and hazardous waste requires knowledge of hazards and risks, regulations, correct execution and safe practice during treatment and transport.


Content:

The learning process leading up to a certificate of competence is carried out to contribute to safe lifting operations, as well as to document the necessary knowledge and skills in accordance with requirements laid down in national regulations and standards.

After completion, participants must be able to identify hazards, risks, causes and consequences of accidents with dangerous goods and hazardous waste.

Participants will also be familiar with restrictions, requirements, classifications, identification, packaging, marking, documentation and handling of dangerous goods and waste.

Course code: MAE-003
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 10485,-

Focus on production and processing. Upon completion of this course, participants should be able to give an account of the production process of oil and gas. They should be able to identify platform equipment, state the position, and, in principle, give an account of the workings of the production and process equipment involved.

 

Course Content 

Introduction:

What is produced?

- Liquids

- Gases

 

The production well:

The Christmas tree

 

The production process, main and auxiliary equipment

- Well head

- Production manifold

- Inlet separator/water separator

- De-gassing tanks

- Liquid separators

- Suction brushes

- Gas Brushes

- Compressors

- Coalescer

- Flare boom - Coolers/heat exchangers

- Pumps

- Filters

- Valves

 

The production process, main and auxiliary equipment, cont.:

- Measuring apparatus

- Water machines - electric boilers

- Gas treatment equipment

- Separators for gas/condensate

- Storage tanks and equipment

- Re-injection manifold

- Safety and surveillance systems

- Help systems

 

Production methods:

- Primary extraction

- Secondary extraction (gas/water injection)

 

Future production systems:

- Underwater/satellite system

 

The course can also be arranged internally and can be tailor-made for individual companies.

Course code: BVS-005
Course type: E-learning course
Duration: 1 hour
Language: English
Price: EUR 200,-

Presentation 

This training course describes the inclining test and lightweight measurement procedures. Inclining test is a test performed on a ship to determine her stability, lightship weight and the coordinates of her centre of gravity. The test is applied to newly constructed ships greater than 24 metres in length, and to ships altered in ways that could affect stability.

Objectives 

On completion of the training, students will be able to: 

Get familiar with the stability of vessels at sea. 

Know the forces involved in the movement of ships. 

Know the types of inclination and equilibrium. 

Understand how and when to perform an inclining test or lightweight check. 

Know the precautions to be taken to perform or witness such tests

Program

Intact stability 

o Introduction to stability and trim 

o Transverse intact stability 

o Characteristics of GM 

o Free surface effect 

o Trim and stability booklet 

Inclining experiment 

o Test description 

o The general condition of the ship 

o Inclining weights 

o Pendulums 

o Means of communication 

o Documentation 

o Inclining test procedures 

o Acceptance and exemptions 

Lightweight measurement 

o Test description 

o Lightweight measurement procedures 

Precautions to be taken to perform or witness these tests

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

o Certificate of Inclining Test and Lightweight Measurement awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Inclining Test and Lightweight Measurement, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination. 

Course code: BVS-022
Course type: E-learning course
Duration: 1,5 hours
Language: English
Price: EUR 280,-

Presentation

This training course provides an overview of the Radiographic Testing (RT) method for non-destructive examination of materials and welding, its objectives and principles.

Objectives

On completion of the training, students will be able to:

Understand the basic physical principles of radiographic testing.

Know the testing procedure and the inspection process referred to the equipment and films used.

Differentiate applications and the acceptance criteria applied.

Get familiar with the purpose of reference accessories to ensure the image quality and the quality of test performance in general.

Program

History

Basic principle

o Radiation

o Films

o Radiographic image quality

Equipment and testing materials

o Radiation sources

o Film systems

o Image quality indicators

o Film viewing equipment

Testing procedure

o Selection of testing parameters

o Test arrangements

o Film processing

o Film evaluation

Applications and acceptance criteria

o Scope

o Weld inspection

o Indications

o Acceptance criteria

o Test report

Reliability, quality of test results

o Test performance

o Film viewing

o Film examination

o NDT personnel competence

o Safety aspects

Certificate

On completion of the training program, the student will be awarded:

A Certificate of NDT – Radiographic Testing, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of NDT – Radiographic Testing is obtained after completion of the course and passing the online test.

Course code: BVS-031
Course type: E-learning course
Duration: 5 hours
Language: English
Price: EUR 580,-

Presentation

This training course covers the requirements of SOLAS Convention concerning the safety equipment of cargo ships. It includes the documentation required on board, life-saving appliances, firefighting equipment, the safety of navigation, safety equipment in general and additional requirements for tankers.

Objectives

On completion of the training, students will be able to:

Know the documentation required to be available on board and understand the requirements of the STCW Convention for safe manning crew members. 

Understand the requirements concerning personal life-saving appliances, survival crafts, rescue boats, and launching and recovery arrangements.

Understand the requirements for fire protection, fire detection and fire extinguishing systems, and get familiar with the specific requirements for the carriage of dangerous goods.

Know what are the navigational equipment and appliances required to ensure the safety of navigation and get familiar with other safety equipment required on board.

Understand the additional requirements applicable for tankers and get familiar with inert gas systems

Program

Module 1 – Documentation on Board

Module 2 – Life-Saving Appliances

Module 3 – Fire Fighting Equipment

Module 4 – Safety of Navigation

Module 5 – Safety in General

Module 6 – Additional Requirements for Tankers

Certificate

On completion of the training program, the student will be awarded:

A Certificate of SOLAS Safety Equipment, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of SOLAS Safety Equipment is obtained after completing the course and passing the online test.

Course code: GAN-011
Course type: Classroom course
Duration: 8 hours
Language: Norwegian
Price: From NOK 2275,-

Grunnleggende teoretisk og generell sikkerhetsopplæring i trykktesting iht. Forskrift om utførelse av arbeid best. 703.

 

Kursinnhold

- Trykk og testmedier

- Materiallære

- Bolter og skruer

- Kontroll og vedlikehold

- Gjenger og koblinger

- Sikkerhet

- Høytrykkspumper og boosterpumper

- Slanger

- Valg av testutstyr

- Prosedyrer

- Måleenheter/tabeller

- Arbeidsmiljø

- Avsluttende teoretisk prøve

Course code: HYT-002
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 2900,-

Standard NS-EN 1591-4 sets requirements for maintenance of competence. If there has been a stay with work on flanged connections for six months or more, a new refresher course must be completed in order to continue to have valid approval. We offer a separate course for those who do not get enough practice (within 6 months) to maintain the approval. The aim is to provide the participant with sufficient theory and practice to continue to be able to perform flange work in accordance with current requirements. The course includes: Flanges, Clamps, Bolts and lubrication, Gaskets, Working procedures, Understanding safe use of tools and equipment, Associated documents

Course code: GWO-005
Course type: Classroom course
Duration: 8 hours
Language: Norwegian
Price: From NOK 3950,-

Basic first aid for the wind industry.

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

 

- Global Wind Organization (GWO)

 - Labor Inspection (Regulations)

 

Competence for "First Aid" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

 

Norwegian only

Course code: STQ-002
Course type: Classroom course
Duration: 3 days
Language: Norwegian / English
Price: From NOK 5990,-

Objective: The purpose of the course is to provide forklift drivers with a good theoretical basic training in the safe use of forklifts, so that accidents in connection with forklift driving are avoided.


Module 1.1 - Basic theoretical module
Module 2.2 -Forklift theory
Module 3.2 - Basic practice forklift.

The course is primarily aimed at future users of forklifts. But anyone who is involved with cargo handling and forklifts in risk analysis and work management can also benefit from the course.

The course is conducted with Norwegian-language teachers and teaching materials in accordance with legislation and regulations, as well as recognized curricula for module-based training.

The forklift driver training consists of four modules:

- Module 1.1 working environment, responsibilities and consequences. *
- Module 2.2 G4 bridge and overhead crane
- Module 3.2 Basic practical training forklift 
- Module 4.2 Practical driving training forklift
- Practical Final test in each forklift type T1-T4

* Module 1.1 is common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, let us know.

Module 4.2 can be completed in a company using a sponsorship arrangement. If you do not have the opportunity to do so, you can participate in one of STQ's practice courses.


Content:

- Safety training, laws, regulations
- Forklift types
- Electric forklift - construction
- Stability
- Daily inspection and maintenance
- Material and goods handling
- HMS
- Proper use of the forklift
- The theory course ends with a theoretical exam

G5 offshorekran modul O-2.1

Course code: KOL-010
Course type: Classroom course
Duration: 5 days / 40 hours
Language: Norwegian
Price: Not set

Dette kurset vil gi fremtidige kranførere en god teoretisk grunnopplæring i sikker bruk av offshorekran. Opplæringen gir kandidatene god innsikt i prinsippene for offshorekraners konstruksjon, virkemåte, vedlikehold og bruk slik at uhell og ulykker i forbindelse med løfteoperasjoner unngås. Opplæringen dekker den teoretiske sikkerhetsopplæringen som kreves for G5 offshorekran, samt G20 fastmontert hydraulisk kran. Kurset avsluttes med en skriftlig teoretisk prøve. Når opplært person har bestått teoretisk prøve, samt eksamen for anhukere med tillegg av praktisk kjøreprøve på offshorekran, vil dette være grunnlag for utstedelse av kompetansebevis for fører av G5 offshorekran.

Kursinnhold:

- Innledning med definisjon på offshorekran

- Bruksområder for offshorekraner, fastmonterte hydrauliske kraner

- Ulykker med offshorekraner

- Lover og forskrifter vedr. offshorekraner 

- Krav til kranfører

- Oppbygging, konstruksjon og montering av forskjellige typer offshorekraner

- Fundament / pidestall

- Bomkonstruksjoner

- Elektrisk anlegg

- Hydraulikk / elektronikk

- Mekanikk

- Lastdiagram

- Sikkerhets- / overlastutstyr

- Vinsj / Ståltau / blokk 

- Kontroll og vedlikehold

- Sertifisering / dokumentasjon

- Sikker bruk av offshorekraner

- Øvingsoppgaver og eksamen




This course is only available in Norwegian.

Course code: KOL-011
Course type: Classroom course
Duration: 40 hours
Language: Norwegian
Price: From NOK 13000,-

Kurset vil gi kranoperatører en god teoretisk grunnopplæring på bro og traverskraner slik at uhell og ulykker i forbindelse med løfteoparsjoner unngås. Opplæringen gir kandidatene god innsikt i prinsippene for traverskraners konstruksjon,virkemåte, vedlikehold og bruk. Ved bestått teoretisk og praktisk prøve, vil det gi grunnlag for utstedelse av kompetansebevis G4 Bro-og traverskraner.

Kursinnhold
- G11 Stropp og anhuker opplæring (se KOL-001)
- Innledning med krav til kranførerer
- Bruksområder for traverskraner
- Ulykker med bro- og traverskraner
- Oppbygging av forskjellige typer bro- og traverskraner
- Elektrisk anlegg på bro- og traverskraner
- Sikkerhetsbrytere
- Ståltau / blokk
- Sertifisering / dokumentasjon
- Kontroll og vedlikehold, sikkerhetsregler ved bruk

- Øvingsoppgaver 

- Eksamen

 

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser

Modul 2.3 (16 timer) G11- Løfteredskap 

Modul 2.7 (16 timer) G4- Bro- og Traverskran 

Modul 3.7 - G4 (8 timer) Praktisk bruk

 

This course is only available in Norwegian.

Course code: STQ-004
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 7300,-

Objective: The training is intended to provide personnel with good theoretical and practical basic training in the use and maintenance of steel ropes.


The course provides a thorough introduction to knowledge about steel ropes, the correct use / choice of steel ropes and what requirements are set for those who use and control steel ropes.

Regulations on the performance of work, use of work equipment and associated technical requirements (regulations on the performance of work) §10-1. Requirement for documented safety training for work equipment that requires special care during use 

When an employer after a risk assessment finds that the work equipment requires special care during use, only employees who have documented safety training according to §10-2 §10-2 can be used. Requirements for documented safety training when using work equipment

Anyone who is to use work equipment as mentioned in §10-1 and §10-3, must have practical and theoretical training that provides knowledge of construction, operation, use properties and area of use, as well as maintenance and control.


Content:

- Basic theory of steel ropes
- Construction
- Properties
- End parties
- Cast blocks / Wire discs
- The right choice of wire rope
- Proper use of wire ropes
- Proper winding and running in of steel ropes
- Maintenance of steel ropes
- Lubrication of steel ropes
- Damage to steel ropes
- Disposal rules
- Checking of wire ropes in accordance with standard ISO-4309
- Exam

Course code: EXT-009
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 6000,-

This is a course for electrical installations in potentially explosive areas.

Our goal is to make sure that employees are motivated to work safely and securely.   


Topics:

• General principles for explosion protection

• Area classification and zone division

• Gas groups and the connection between area and equipment

• Temperature classes and the connection between area and equipment

• The general principles for type of protection and labeling

 

Standards:

• NEK 420

• IEC / NEK EN 60079-10-1

• IEC / NEK EN 60079-14

 

This course is only available in Norwegian.

Course code: BVS-008
Course type: E-learning course
Duration: 18 hours
Language: English
Price: EUR 900,-

Presentation 

This training course provides a general introduction to Naval Architecture, the art and science of building ships. 

Objectives

On completion of the training, students will be able to: 

Understand the ship design process and the main terms and definitions used, including the lines plan, the form coefficients used in ship design, and the area and volume properties. 

Know the basic concepts of intact and damage stability. 

Get familiar with the main aspects of marine hydrodynamics acting on ship resistance, propulsion and seakeeping. 

Understand the basic principles of ship structures, structural design, scantling determination and typical structural arrangements of different ship types. 

Know the most common failure modes and structural defects. 

Get familiar with shipbuilding technology processes, materials used and shipyard layout 

Program 

Module 1 – Ship Geometry

Module 2 – Ship Stability and Trim

Module 3 – Damage Stability

Module 4 - Load Lines

Module 5 – Ship Resistance, Propulsion and Seakeeping

Module 6 – Introduction to Ship Structures

Module 7 – Structural Arrangement of Different Ship Types

Module 8 – Structural Design, Analysis and Classification Rules

Module 9 – Failure Modes and Structural Defects

Module 10 – Introduction to Shipbuilding

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Introduction to Naval Architecture awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Introduction to Naval Architecture, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

Course code: BVS-018
Course type: E-learning course
Duration: 4 hours
Language: English
Price: EUR 380,-

Presentation

This training course provides a general introduction to materials and their basic properties. It includes an overview of metallic and non-metallic materials used in modern shipbuilding.

Objectives

On completion of the training, students will be able to:

Understand the importance of materials’ properties for shipbuilding, know the basic mechanical properties of materials and the testing procedures, be familiar with the concept of tribology, and know the two most common types of wear.

Know the main groups of steels used in shipbuilding, their main properties and places of application, and understand the difference between steel and cast iron.

Know the composition, properties and places of application of aluminium and copper alloys in shipbuilding.

Get familiar with the synthesis, structure and properties of polymers; know the most common types of polymers used and their place of application.

Understand the role of matrix and reinforcement phase in the structure of composites and know the fabrication methods of composite parts.

Program

Module 1 - Basic Material Properties

History

Structural components and materials of modern vessels

Basic material properties

Mechanical properties of materials
o Tensile test
o Toughness
o Fatigue
o Creep
o Hardness

Tribological properties of materials
o Friction
o Wear

Module 2 - Metallic Materials used in Shipbuilding

Classification of metallic materials

Steels
o Normal strength steels
o Higher-strength steels
o Steels for boilers and pressure vessels
o Ferritic steels for low-temperature service
o Stainless steels
o Steel forgings
o Steel castings

Cast iron

Aluminium and its alloys
o Classification
o Heat treatment
o Wrought aluminium alloys
o Cast aluminium alloys

Copper and its alloys
o Classification
o Brass (Copper-Zinc alloys)
o Bronzes
o Copper-Nickel alloys

Module 3 - Plastic and Composites used in Shipbuilding

Polymers (plastics)
o Classification
o Application in marine engineering

Composites
o Composition
o Classification
o Polymer matrix composites
o Processing of fibre-reinforced composites
o Structural composites

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Materials in Shipbuilding, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Materials in Shipbuilding is obtained after completion of the course and passing the online test.

Course code: GWO-004
Course type: Classroom course
Duration: 4 hours
Language: Norwegian
Price: From NOK 2250,-

Basic Fire Awareness for the wind industry.

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

 

- Global Wind Organization (GWO)

- Labor Inspection (Regulations)

 

Competence for "Fire Awareness" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Norwegian only

Course code: LSI-002
Course type: E-learning course
Duration: 4 hours 30 minutes
Language: Polish
Price: NOK 1190,-

This course covers the theoretical part of the documented safety training required for slingers and signallers. The course is also suitable as a refresher for crane operators and other personnel who have previously completed training in lifting appliances and lifting gear. The course content deals with selection, control and safe use of the most common lifting gear used in construction, industry, shipping and offshore. Signalling, communication and controlling the load are key topics of the course.

In addition, the course requires that practical training is conducted on applicable work equipment.

 

The course contains 9 modules:

• Lifting equipment, expressions and acronyms

• Slinging, center of gravity, working angles and lifting tables

• Fibre slings

• Lifting gears of chain

• Wire rope slings

• Shackles

• Eye bolts, nuts and lifting lugs

• Signals and signs, and control of load

• Safety regulations for lifting operations

Hits per page