Course catalogue

Who is the course for?

Personnel who require knowledge or awareness of dangerous goods within HEMS operations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

This course is part of the required trainings for HEMS operating crew, and covers classification of dangerous goods, how dangerous goods is divided into hazard classes, how it should be marked and labelled and what emergency procedures should contain.

This course must be repeated every 24 months.

How will the course benefit my company?

By ensuring you are familiar with the classification of dangerous goods, how dangerous goods is divided into hazard classes, how it should be marked and labelled and what emergency procedures should contain.

What standards are referenced in the course?

• International Civil Aviation Organization (ICAO)

• International Air Transport Association (IATA)

Ce cours est destiné à vous présenter les bonnes pratiques de l'industrie concernant le travail avec accès à des espaces confinés.

Lorsque ce cours sera terminé, vous devriez pouvoir :

• Expliquer les exigences dictées par les bonnes pratiques de l'industrie relatives au travail impliquant l'accès à des espaces confinés.

Presentation 

This training course aims at providing a general description of the different types of lifting appliances that may be found on board ships and offshore units, their main characteristics and operating principles. It provides an introduction to the applicable rules and regulations related to lifting appliances. 

Objectives

On completion of the training, students will be able to: 

Get familiar with the various types of lifting appliances installed on board ships and offshore units. 

Know the regulations, which are relevant for inspection and certification of cargo gear, including international regulations and BV Rules. 

Understand the particularities of lifting appliances and the relevant requirements for the survey of materials and equipment.

Understand the scope of intervention for Cargo Gear in various stages – design, manufacturing and operation, including an overview of control and safety design requirements.

Program

Types of lifting appliances

Definitions

Derrick systems

Cranes

Typical crane types

Applicable Rules and Regulations

International Regulations and National Requirements

Bureau Veritas Rules, additional class notations and recognized standards

Bureau Veritas services

Cargo Gear Register Book

Design, Inspection, testing and surveys at works

Design acceptance criteria

Documents to be submitted

Inspection and testing

Steel wire ropes and fibre ropes

Loose gear

Winches

Survey of fitting on board

Overall tests prior to putting into service: Mandatory tests, overload test, testing at

Manufacturer’s test bench, inspections after testing

Marking

In-service surveys

Periodicity, scope and documentation

Guidelines for a thorough annual examination

Items to be tested: slew bearing, loose gear examination, ropes, hydraulic system

Control and safety devices

Thickness measurements, wear limits and criteria for replacement

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of Cargo Gear and Lifting Appliances, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Cargo Gear and Lifting Appliances is obtained after completion of the course and passing the online test. 

This course will give you an introduction to the use of EPOXY and about procedures that ensure a safe work environment. The aim of the course is for you to be able to contribute to that your work place will continue to be a safe place to work, without injuries and accidents.

The course contains the following subjects:
-    Introduction to Epoxy products
-    Relevant health risks associated with Epoxy produkts
-    Precautions by using Epoxy products
-    Danger symptoms
-    Final test

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations offshore.

The course also provides first-aid instruction and training. CPR training must be completed separately.

In accordance with section 7 of FSE, FSE and and first-aid training must be completed at least once a year. In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course addresses a variety of issues and covers how to prevent electrical accidents, routines in the event of accidents, and theoretical first aid, and aims to help prevent harm to people, equipment, and installations.

Hensikten med opplæringen er å gi blivende riggere en god praktisk grunnopplæring i sikker bruk av riggerutstyr. Opplæringen skal gi elevene god innsikt i prinsippene for riggutstyrets konstruksjon, virkemåte, bruk og vedlikehold, slik at uhell og ulykker i forbindelse med riggoperasjoner unngås. Riggoperasjon: Bruk og sammenstilling av transportabelt løfteutstyr og/ eller manuelle/ kraftdrevne vinsjer, taljer etc. som benyttes ved horisontal og/ eller vertikal forflytning av last. Opplæringen dekker den nødvendige teoretiske og praktiske opplæringen som er nødvendig for å kunne gjennomføre selvstendige riggoperasjoner. Opplæringen avsluttes med en praktisk prøve.

Modul O-2.2: Fallsikring - Søylesvingkran / enkel traverskran - Taljer / vinsjer. (16 timer opplæring).

Modul O-3.2: Rigging (32 timer opplæring) Beviset kan utstyres med opplæringsbedriftens/virksomhetens logo.

This course is only available in Norwegian.

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates abespoke course to address these knowledge gaps.

This course covers the following learning objectives:

LO1 Explain what is meant by a Confined Space

LO2 Give examples of Confined Spaces

LO3 Describe the dangers that can be caused by confined space entry work

LO4 Identify the key pieces of legislation that help to control confined space entry work

LO5 Explain how to avoid entering confined spaces

LO6 Explain the importance of having a Safe System of Work in place

LO7 Describe individual roles and responsibilities involved in Confined Space Entry work

LO8 Explain the requirements for gas testing

LO9 Identify acceptable levels for atmospheric test results

LO10 Give examples of Confined Space Entry site safety equipment

LO11 Explain the actions to take in an emergency situation

LO12 Explain Confined Space Entry alarm procedures

The course gives you a basic understanding of the principles of intrinsically safe loops (IS) in potentially explosive areas.

After completing the course, the candidate will have acquired the necessary knowledge about the design of intrinsically safe (IS), choice of equipment, inspection and maintenance in potentially explosive areas.

Our aim is to ensure that the employees are motivated to work safely and securely.

The course lasts 5 hours and the course certificate is valid for 5 years

The e-learning course can also be used as a refresher after 5 years

Themes:

• Understand the general principles for the type of specific protection and correct marking of components approved in intrinsically safe systems (IS)

• Current standard for Exi

• Construction and assessment of intrinsically safe equipment

• Assessment and concrete use of “simple apparatus app”

• Be able to choose and install the correct Exi equipment in hazardous areas according to the standards IEC 60079-14 and 60079-25

• How to work safely with IS

• Competence requirements for performing work on Exi installations

• How to verify and calculate an Exi circuit

• Know where to find and how to read relevant standards, data sheets, product sheets and other relevant literature

Who is this course for?

Personnel involved with mechanical material handling equipment and operation, crane operation, rigging, supervision and signalling related activities. 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

To provide learners with an awareness of industry best practice for working with cranes.

This course consists of 4 sections:

Section 1: Introduction to Crane Operations

Section 2: Cranes and Lifting Equipment

Section 3: Planning a Lift

Section 4: Carrying out a Lift

How will this course benefit my company?

By ensuring you are aware of industry best practice for working with cranes.

What standards are referred to in this course?

• The Lifting Operations and Lifting Equipment Regulations (LOLER) 

• The Provision and Use of Work Equipment Regulations (PUWER) 

• The Safe Use of Lifting Equipment: Approved Code of Practice (ACOP)

• Lifting Equipment at Work Guidance

• Personal Protective Equipment at Work Regulations

• Health and Safety at Work Act s.16

• Management of Health and Safety at Work Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Everyone working on high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on high voltage installations.

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Maritime personnel who may be affected by potential baggage searches.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course aims to provide an introduction to personnel and baggage searches in the Maritime Industry.

How will this course benefit my company?

By ensuring you are aware of the personnel and baggage searches which might be carried out. 

What standards are referred to in this course?

SOLAS ch. 11 - ISPS code

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

The OPITO Internal Verifier Award delivered through Blended Learning requires the following:

Computer/Laptop

Webcam

Printer/scanner

The Blended learning is delivered in Stages:

Stage 1 Online registration 1 hour to complete

Stage 2 Self study of the workbook provided

Stage 3 A live webinar 1 day of 6 hours. (sessions run once per week)

The following units will be discussed and practical exercises completed on the live webinar following a 1 hour Exam:

1. Introduction to Internal Verification

1.1 The Purpose of Internal Verification

2. The Internal Verifier’s Role

2.1 Supporting Assessors

2.2 Monitoring and Verifying the Quality of Assessments

2.3 Record Keeping and Feedback

2.4 Assuring the Competence Process

Delegates attending this Internal Verifier Blended Learning training programme will be given a series of explanations and demonstrations that will identify what they are expected to know and do. This will be followed by practical exercises allowing delegates to rehearse their skills, knowledge and understanding of the Internal Verifier role. All practical exercises conducted on the live webinar shall use, wherever possible, the actual paperwork that the delegates are expected to use in their workplace.

Stage 4- Workplace verifications to be completed within 12 months of training to become a fully qualifed OPITO Internal verifier 

OPITO Internal Verifier Award Standard 

The course provides knowledge about preparation, planning, execution and documentation of assembling the bolted connections. The course is a combination of theory and practice and concludes with a theoretical test and a practical test with sensor.

The main objective is to provide the necessary expertise, both knowledge and skills to executive responsible person to dismantle, assemble and attract bolted connections in accordance with EN 1591-4 chapter 8.

The timetable covers the following tables in EN 1591-4: 2013: 1, 2, 3, 6, 7, 8 and 9.

The course is designed for people who already know how to declare on paper and who want to learn how it is done electronically.

E-learning course material to self-study the L&D9DI requirements to meet SQA for:

1. Preparing and planning assessments 

2. Assessing candidate’s performance and knowledge 

3. Confirming candidate progression and achievement 

4. Documenting each of the above according to the requirement of the management system in the workplace 

5. How to build a portfolio of evidence that meets the L&D9DI standard 

6. How to demonstrate knowledge of the above processes and a range of knowledge related to competence assessment in the workplace

What’s included in this course:

• SQA Registration Fee

• Online Induction

• Access to all L&D9DI e-learning modules

• Full explanation of evidence requirements and access to templates and evidence guides and examples 

• Full access to Mintra ITB TrainingPortal

• Virtual classroom on request - Introduction to SQA running weekly 

• Comprehensive support from an ITB Assessor to completion

• Assessment and Internal Verification of your submitted evidence

• SQA Certification Successful delegates will receive a certificate from the Scottish Qualifications Authority (SQA)

Virtual webinar sessions running weekly with an ITB Trainer for a Q&A session. Join as many virtual sessions as needed to support to completion of the full SQA qualification. 

Those who assess in the workplace using direct and indirect methods of assessment using examples: observation, questioning, work product, professional discussions, simulations, written evidence such as witness statements and candidate statements and RPL.

Assessment Requirements

Delegates will be required to submit a portfolio of evidence covering all of the Performance and Knowledge Criteria for the L&D9DI Unit. They must submit, as a minimum, assessment-related documentation that provides evidence for the elements listed below, for two candidates, covering two assessments per candidate: 

• Preparing to assess 

• Planning assessments 

• Assessing candidate’s performance and knowledge 

• Confirming progression and achievement

Delegates must use a range of assessment methods, including observation, questioning and work product. 

Delegates will also need to be observed carrying out part of the assessment process by an ITB (or NVQ-level) assessor and participate, with other assessors in their workplace, in standardisation practice.

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations.

Who is this course for?

Maritime personnel who require an introduction to or awareness of maritime Protection and Indemnity insurance.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course aims to provide personnel with an awareness of the principles of maritime Protection and Indemnity Insurance.

How will this course benefit my company?

By ensuring you have an understanding of the maritime Protection and Indemnity Insurance. 

What standards are referred to in this course?

The Marine Insurance Act.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Hensikten med kurset er å gi blivende kranførere god teoretisk og praktisk grunnopplæring på fastmonterte hydrauliske kraner. Kurset gir elevene god innsikt i prinsippene for kranens konstruksjon og virkemåte. Etter endt kurs med bestått teoretisk prøve vil denne sammen med bestått praktisk kjøreprøve være grunnlaget for utstedelse av kranførerbevis G20 Fastmontert hydrauliske kraner.

Opplæringen dekker kompetansekrav i NORSOK standard R003N for Kranfører G20. 

Kursinnhold
- Innledning
- Konstruksjon
- Hydraulikk
- Mekanikk
- Lover / forskrifter / standarder
- Ståltau / vinsj / blokker
- Dokumentasjon
- Sikkerhetsbestemmelser
- Løfteredskap
- Øvingsoppgaver
- Eksamen

This course is only available in Norwegian.

An important part of Hytorc Norway's overall concept is courses and training in working on flanges and bolted connections. We have been involved in the development of courses since OLF started its Gas Leakage Project in 2003 and up to today's requirements which are in accordance with NS-EN 1591-4.

The timetable covers the following tables in
NS EN 1591-4: 2013: 1, 2, 3, 6, 7 and 8.

Dette kurset tilfredsstiller krav i Norsok R-003 tillegg B.8 og B.9 vedlikehold og verifikasjon av kompetanse. Simulator trening bør gjennomføres minst hvert tredje år for kranoperatører G5 offshorekran, dekksoperatører kan delta for å øke risikoforståelse, holde seg oppdatert på regelverk.

Målsetningen med kurset er at kranoperatør skal tilegne seg tilstrekkelig kunnskap om sikker bruk av G5 offshorekraner til å håndtere last internt på innretning, til og fra fartøy mellom faste eller flytende innretninger og undervannsløft på en sikker måte. Risikoforståelse, riktig adferd, teknisk systemforståelse og krav i NORSOK R-003 er hovedfokus under gjennomføring.

Kursinnhold: 
- Kartlegging av kompetanse
- Kjennskap til ulykker innen kran- og løfteoperasjoner
- Lover, forskrifter, standarder og brukermanual
- NORSOK R-003 sikker bruk av løfteutstyr
- Løfteinnretningens tekniske oppbygning og virkemåte
- Løfteinnretningens sikkerhetssystemer
- Vedlikehold og sakkyndig kontroll
- Planlegging av løfteoperasjoner
- Simulatortrening: kritiske løfteoperasjoner, personalløft med MOB-båt/personalbasket og løft under marginale værforhold
- Simulatortrening: Bruk av sikkerhetssystemer, AOPS, MOPS, nødlåring og nødkjøring
- Simulatortrening: fokus på personlig faktor og reaksjonsmøter
- Evaluering etter hver øvelse i simulator
- Teoretisk eksamen

Påmelding
- Påmeldingsskjema skal fylles ut og returneres sammen med en PO eller akseptert betalingsmetode.
- PO eller akseptert betalingsmetode kan sendes til RA-NOR-AMAdminSupport@nov.com. 
- Ordrebekreftelse og Joining Instruction vil bli sendt så snart deltakeren har fått plass.

Kansellering
- Hvis kjøper kansellerer mindre enn tretti (30) dager før oppstartsdato, vil kjøper bli belastet 100% av beløpet for opplæringen.
- Selger forbeholder seg retten til å kansellere og / eller planlegge ny dato på kurs med lav påmelding opptil to (2) uker før startdato for kurset.

No show
Ved manglende oppmøte, forbeholder selger seg retten til å fakturere kjøper for "no show" 100 % av beløpet for opplæringen.

NATIONAL OILWELL VARCO, L.P. OG DETS AFFILIATER VILKÅR OG BETINGELSER gjelder for alle kurs.