Oil and Gas

Course catalogue

hits
413
Course code: MUK-115
Course type: E-learning course
Duration: 40 minutes
Language: English
Price: NOK 600,-

Who is the course for?

All personnel who work in a role that may put them at risk of a hand or body injury.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with an introduction on how to prevent hand and body injuries in the workplace.

How will the course benefit my company?

This course to ensure personnel have the knowledge of how to protect their hands and body from injury in the workplace, by following safety measures and understanding procedures.

What standards are referenced in the course?

Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-182
Course type: E-learning course
Duration: 20 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel requiring awareness or understanding of turbo expanders.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course provides an overview of the principles of turbo expansion.

 

How will this course benefit my company?

By ensuring you have an overview of the principles of turbo expansion.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-177
Course type: E-learning course
Duration: 1 hour
Language: English
Price: NOK 1000,-

Who is this course for?

Personnel requiring awareness or understanding of subsea control systems.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of subsea control systems and has the following sections:

Section 1: Evolution of Subsea Technology

Section 2: Subsea Completions Layout

Section 3: Subsea Control Systems

Section 4: Subsea Process Control

Section 5: Subsea Technology Development

 

How will this course benefit my company?

By ensuring you have an overview of industry best practice in relation to Subsea Control Systems.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-155
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 500,-

Course Goal: This course aims to provide an overview of seawater systems.

 

Who is this course for?

Trainee Oil and Gas Operations Technicians.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

 

How will this course benefit me?

This course aims to provide an overview of seawater systems.

 

How will this course benefit my company?

To ensure you have an overview of seawater systems.

 

What standards are referred to in this course?

This course is made according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: TRA-002
Course type: E-learning course
Duration: 3 hours + Workbook
Language: Norwegian
Price: NOK 1800,-

ISM-koden (International safety management code – A.741(18)) er en internasjonal sikkerhetsstyringsstandard for drift av fartøy (flyttbare installasjoner til sjøs) og hindring av forurensing. Tolv år etter at ISM koden ble obligatorisk, gjennomførte IMO den første revideringen (gjennomgang) av koden. Endringene ble gjort gjeldende fra og med juli 2010. Den siste “oppdateringen” (forandringer) av ISM koden (2014) er gjeldende fra og med 2015. I 2017 vedtok den internasjonale maritime organisasjonen (IMO) kravet om Maritime Cyber risikostyring (datasikkerhet). Datasikkerhet skal nå være en integrert del av rederiets risikostyring for å håndtere risikoen for sine skip. Fra og med 2021 er kravet at håndtering av cyberrisikoer er innarbeidet i rederiers sikkerhetsstyringssystem.

Kurset tar for seg ISM kodens oppbygning og krav satt i koden. Samt hvordan selskapet (rederi) delegerer, og hvordan de involverte ivaretar sine oppgaver og plikter.

Kursdeltagerne skal etter gjennomført kurs forstå bakgrunn og formål med ISM koden. Selskapet sitt ansvar, samt være i stand til å bidra med å gjennomføre, evaluere og kontinuerlig forbedre et selskap sitt styringssystem.


This course is only available in Norwegian.

Course code: LSI-001
Course type: E-learning course
Duration: 1 hour
Language: Norwegian
Price: NOK 650,-

The goal of this course is that all personnel who use hazardous work equipment, will gain good knowledge of HSE when using work equipment. The course deals with personnel requirements, roles and responsibilities, as well as accidents and regulations on safety.

In addition, the course requires that practical training is conducted on applicable work equipment.

The course covers the following topics:

• Work equipment in general
• Use of work equipment
• Selection of work equipment
• Training in the use of work equipment
• Workspaces and personnel requirements
• Risk assessment
• Safety, accidents and liability
• Direct and underlying causes of accidents
• Relevant laws and regulations

The course includes exercises, and final test with 30 questions.

Course code: MAE-001
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 5425,-

Focus on various phases of a drilling operation.
Upon completion of this course, participants should be able to describe the various phases of a drilling operation. They should be able to identify, state the position and give an account of how drilling equiopment is used on a platform.

 

Course Content

Data collection:

- Formation research

- Petroleum geology

- Drillhole logging

 

Platform types:

- Various platform types

 

Drilling technology with drilling equipment:

- Lift system

- Help equipment for drilling

- Drill column

- Bits

- Surge pipe and BOP

- Compensatory equipment

- Fishing and fishing equipment

- Directional drilling

- Drilling from a floating installation

 

General well control:

- Hydro static pressure

- Formation pressure

- Break-up pressure

- Grounds for kick

- Out-circulating of kick

- Methods for killing operation

- Concept of kick/blow-out

- Well-control equipment

 

Feed pipes and cementing:

- Types of feed pipes

- Putting in feed pipes

- Cementing

- Equipment/cement unit

 

Mud technology:

- Functions of mud

- Equipment

- Cleaning mud

 

The course can also be arranged internally and can be tailor-made for individual companies.

Course code: EBA-007
Course type: E-learning course
Duration: 8 hours
Language: English
Price: NOK 1900,-

Requirements for training related to scaffolding are regulated by law and regulations. This course is based on the requirements of Regulations concerning the Performance of Work, Chapter 17, which is about assembly, dismantling and alteration of scaffolding.

-2-5 meters: 7.5 hours theory and  7.5 hours practical training

-5-9 meters: 15 hours theory and 15 hours practical training

-Over 9 meters: 36 hours theory and 72 hours practical training

This course covers the requirements of theoretical training for scaffolding up to 9 meters, and corresponds to the requirements of the Regulations concerning the Performance of Work, Section 17-2 and 17-3, on theoretical training. There is an additional requirement of 15 hours practical training if 5-9 meters.

Course content:
-What is scaffolding
-Scaffolding and safety
-Risk assessment
-Forces and counter forces
-Structure of a scaffold
-Wind forces
-How to prevent accidents
-Mobile scaffold towers
-Haki scaffolding systems

Dersom du har gjennomført stillasopplæring (teorikurs) - og kan dokumentere nødvendig praksis i henhold til kravene i forskrift om utførelse av arbeid §§17-2, 17-3 og 17-4 - kan du bestille stillasbevis.

Klikk her for informasjon: https://www.eba.no/stillasbevis//

Course code: AST-008
Course type: E-learning course
Duration: 22 hours
Language: English
Price: GBP 350,-

Provided in association with Astutis, approved centre 1857.


IOSH Managing Safely is a basic risk management health and safety certificate which will offer managers an understanding of the practical actions needed for the health and safety of their teams.

 

It enables organizations to demonstrate a commitment to health and safety standards by ensuring managers and supervisors are aware of their responsibilities and the positive actions they can take to ensure a safe a healthy working environment.

 

On completion of the course, learners will be able to:

 

• Understand your responsibilities for safety in the workplace.

• Recognise common workplace hazards and implement appropriate control measures.

• Estimate, evaluate and reduce risk by applying a hierarchy of risk control.

• Undertake structured risk assessments and accident investigations.

• Understand the requirements of HSE legislation.

• Recognise different ways to measure and improve health and safety performance.

 

Course code: KOL-012
Course type: Classroom course
Duration: 1 day / 8 hours
Language: Norwegian
Price: From NOK 3800,-

Hensikten med kurset er å gi opplæring av riktig og sikker bruk av fallsikringsutstyr og bruk av redningsutstyr. Kurset gir kandidaten opplæring i hvordan de skal gjøre seg kjent med vedlikeholdsrutiner og produsentens bruksanvisning slik at fallsikrings- og redningsutstyr brukes på en riktig og sikker måte.

Leksjon 1 i Mod. O-2.2 og siste punkt i leksjon 2 i Mod. O-3.2


Kursinnhold
- Innledning
- Regelverk, standarder og retningslinjer
- Risikovurdering og risikohåndtering
- Konsekvenser av et fall i fallsikringsutstyr
- Kjennskap og ferdigheter til relevante typer fallsikringssystem, utstyr og metoder
- Krav til vedlikehold, oppbevaring og kontroll
- Skriftlig prøve

This course is only available in Norwegian.

Course code: MUK-119
Course type: E-learning course
Duration: 1 hour
Language: English
Price: NOK 1000,-

Who is this course for?

Personnel requiring an awareness or understanding of (Material) Safety Data Sheets ((M)SDS) for chemicals.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of the structure and information contained in Safety Data Sheets.

 

How will this course benefit my company?

By ensuring you have an overview of Safety Data Sheets and how your role may require to understand certain information contained in the sheets.

 

What standards are referred to in this course?

Chemicals (Hazard Information and Packaging for Supply) Regulations 2009

CLP Regulation

REACH Regulation

Control of Substances Hazardous to Health (CoSHH) Regulations

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Course code: WEC-003
Course type: Classroom course
Duration: 24 hours
Language: Norwegian
Price: From NOK 8615,-

Kursene omfatter opplæring i sikker bruk av redningsutstyr, planlegging, organisering og risikovurdering av redningsaksjoner, samt førstehjelp ved hengetraume. Kursene innehar realistiske øvelser i hvordan det utøves redning av personer på en mest mulig effektiv og forsvarlig måte ved bruk av redningsutstyr.

Regelverksreferanse:

NOG Kursplan taubasert fallredning

Course code: WEC-003-rep
Course type: Classroom course
Duration: 16 hours
Language: Norwegian
Price: From NOK 6615,-

Kursene omfatter opplæring i sikker bruk av redningsutstyr, planlegging, organisering og risikovurdering av redningsaksjoner, samt førstehjelp ved hengetraume. Kursene innehar realistiske øvelser i hvordan det utøves redning av personer på en mest mulig effektiv og forsvarlig måte ved bruk av redningsutstyr.

 

Regelverksreferanse:

NOG Fagplan fallredning (og repetisjon)

Course code: RVT-966
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 15,-

It has become increasingly clear that social media is not just a fad. It is instead, not only a massive change in the way we socialize with others in a personal setting, but also the biggest shift in how we conduct business since the arrival of the Internet. Social media is quickly altering every aspect of corporate operations, such as hiring practices, training, marketing, and even risk management.   The purpose of this course is to introduce you to social media, explore how we use social media personally vs. social media use in a business setting, how its use continues to evolve in the workplace, the benefits of social media, and of course the risks it can present to you personally and to companies.

Course code: KOL-003
Course type: Classroom course
Duration: 40 hours
Language: Norwegian
Price: From NOK 13000,-

Hensikten med kurset er å gi blivende kranførere god teoretisk og praktisk grunnopplæring på fastmonterte hydrauliske kraner. Kurset gir elevene god innsikt i prinsippene for kranens konstruksjon og virkemåte. Etter endt kurs med bestått teoretisk prøve vil denne sammen med bestått praktisk kjøreprøve være grunnlaget for utstedelse av kranførerbevis G20 Fastmontert hydrauliske kraner.

Opplæringen dekker kompetansekrav i NORSOK standard R003N for Kranfører G20. 

Kursinnhold
- G11 stroppekurs (se KOL-001)
- Innledning
- Konstruksjon
- Hydraulikk
- Mekanikk
- Lover / forskrifter / standarder
- Ståltau / vinsj / blokker
- Dokumentasjon
- Sikkerhetsbestemmelser
- Løfteredskap
- Øvingsoppgaver
- Eksamen

Course code: MUK-170
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Who is this course for?

Personnel in oil and gas operations or technical roles.

 

Is previous experience required?

It is recommended you have completed the principles of well control course prior to undertaking this course.

 

How will this course benefit me?

This course aims to provide an overview of snubbing.

 

How will this course benefit my company?

By ensuring your personnel have an overview of snubbing operations.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: BIKS-004
Course type: Classroom course
Duration: 3 days
Language: Norwegian
Price: From NOK 15200,-

Kursinnhold:

Modul O-2.6

- 6 timer teori

- 13 timer praksis

- 5 timer Eksamen/evaluering

 

Følgende blir bl.a gjennomgått:

Teori:

- Årsaker til uønskede hendelser

- Avviksrapportering

- Risikovurdering og risikostyring

- Barrierer

- Arbeidsmiljøloven

- Vegtrafikkloven

- Forskrift om Bruk av kjøretøy

- Norsk olje og gass - retningslinje 116

- Bruk av personlig verneutstyr

- Ulike typer lastbærere, konstruksjon, funksjon og virkemåte

- Valg av lastbærere

- Brukerkontroll av lastebærere, kriterier for bruk

- Planlegging av innlastning

- Festepunkter i lastebærere

- Krefter man sikrer lasten for

- Teoretisk eksamen

 

Praksis:

- Korrekt bruk av personlig verneutstyr

- Egen og andres sikkerhet

- Typeopplæring på truck, inkl. relevant tilleggsutstyr

- Gjennomføre brukerkontroll av lastebærere

- Sikring av last til paller

- Planlegge innlasting og sikring av ulike typer last i ulike typer lastbærere,

   inkl. bil/transportflak/tralle

- Funksjon av lastsikringsutstyr, som fiber og kjetting

- Bruk av lastsikringsutstyr, barriere og avstemplingsmateriell

- Kontroll av lastsikringsutstyr

- Gjennomføre innlasting og lastsikring av ulike typer last i forskjellige        lastbærere

- Bruk av ulike hjelpeverktøy

- Praktisk eksamen

 

Eksamen/Evaluering:

- Avsluttende prøver gjennomføres selvstendig og uten hjelpemidler.

Course code: LSI-003
Course type: E-learning course
Duration: 3 hours
Language: Norwegian
Price: NOK 990,-

G4 Traverskran med praksis Modul 2.7, 3.7 + 4.7

Course code: KOL-015
Course type: Classroom course
Duration: 5 days / 40 hours
Language: Norwegian
Price: Not set

Kurset vil gi kranoperatører en god teoretisk grunnopplæring på bro og traverskraner slik at uhell og ulykker i forbindelse med løfteoparsjoner unngås. Opplæringen gir kandidatene god innsikt i prinsippene for traverskraners konstruksjon,virkemåte, vedlikehold og bruk. Ved bestått teoretisk og praktisk prøve, vil det gi grunnlag for utstedelse av kompetansebevis G4 Bro-og traverskraner.

Kursinnhold
- Innledning med krav til kranførerer
- Bruksområder for traverskraner
- Ulykker med bro- og traverskraner
- Oppbygging av forskjellige typer bro- og traverskraner
- Elektrisk anlegg på bro- og traverskraner
- Sikkerhetsbrytere 
- Ståltau / blokk 
- Sertifisering / dokumentasjon
- Kontroll og vedlikehold, sikkerhetsregler ved bruk

- Øvingsoppgaver 

- Eksamen

 

Modul 2.7 (16 timer) G4- Bro- og Traverskran 

Modul 3.7 - G4 (8 timer) Praktisk bruk

Modul 4.7 - G4 Bedriftsoppl. - 32 timer Oppl.virksomhet-16 timer

 

This course is only available in Norwegian.

Course code: KOL-028
Course type: Classroom course
Duration: 16 timer
Language: Norsk
Price: From NOK 10200,-

Kraner - Ståltau - Håndtering og vedlikehold, inspeksjon og kassasjon
Norsok Standard R-003N og R-005N - Sikker bruk av løfteutstyr.

Kursets målsetning:

Kraner - Ståltau - Håndtering og vedlikehold, inspeksjon og kassasjon.
Dokumentasjon av kontroll i samsvar med standard ISO-4309

Ståltau har røket ved flere anledninger. Dette kan føre til alvorlige hendelser og i verste fall kan liv gå tapt. Kurset skal gi elevene god innsikt i prinsippene for ståltauets oppbygning, konstruksjon og virkemåte. Ståltau beregnet til løfteredskap, kraner og winch. Montering, lagring, smøring, vedlikehold, terminering, endefester og brukskontroll.

Ståltau -Teori og praksis:
Dokumentasjon av kontroll i samsvar med standard ISO-4309

Introduksjon
Oppbygning av ståltau
Standarder for ståltau
Ståltau til kraner og maskiner
Bestilling av ståltau
Definering av bruddlaster
Håndtering, installasjon, vedlikehold og lagring
Smøring og vedlikehold
Ståltau skiver
Vinsjer og tromler
Termineringer og endefester
Typiske feil og skader
Kontroll av ståltau etter ISO 4309
Teoretisk og praktisk kontroll
Utfylling av kontroll/evalueringsskjema
Eksamen/test

Læremateriell, kursbevis, kaffe og lunsj er inkludert i kursavgiften.

This course is only available in Norwegian.

Hits per page
| 1 ... 15 ... |