Kurskatalog

Piratvirksomhet og væpnet ran har i økende grad blitt en reell trussel for sjømenn om bord skip og flyttbare enheter. På bakgrunn av dette har det nå kommet krav om sikkerhetsopplæring for alle sjømenn om bord på skip eller flyttbare enheter som er gjeldende fra 1. januar 2014 (ifølge ISPS koden).

Opplæringen i Ship Security Awareness er godkjent av Sjøfartsdirektoratet og skjer i samarbeid mellom Mintra Trainingportal og kunde.

Selve opplæringen består av et e-læringskurs samt fullføring av elementer beskrevet i en sjekkliste som gjøres om bord. Godkjente instruktører hos kunden, skal kvittere for sjekklisten for student.

Når opplæringen er fullført utstedes et sertifikat av Sjøfartsdirektoratet.

Innhold i e-læringskurset:
- Sikringsbevissthet
- Internasjonal maritim sikringspolitikk
- Sikkerhetstiltak og prosedyrer om bord
- Sikkerhetstrusler
- Etter et angrep
- Avsluttende test

Ta kontakt med Mintra Trainingportal hvis du ønsker informasjon om hvordan opplæringen kan gjennomføres på en enklest mulig måte.

Basic knowledge of ISPS rules and regulations applicable to international ports and harbours.

The course objective is to raise awareness of possible threats to international ports and harbours. Completed course normally gives access to ISPS-areas on harbours.

Course Content
Introduction
Regulations
Roles and responsibilities
Threats
Security levels and measures

Kurset er godkjent av Sjøfartsdirektoratet.

Dette kurset er kombinert trening som består av:
- Et e-læringskurs
- Om bord-trening. Denne treningen består av en rekke øvelser og kan ta et par uker å fullføre. Når alle elementene i sjekklisten er gjennomført, er opplæringen fullført.

Gjennomføring av kurset krever at du er ansatt i et selskap som har en plan for ombordtrening av denne type aktiviteter. Kontakt Mintra for å få informasjon om hvordan du gjennomfører denne type trening.

Kurset blir ikke godkjent for privatpersoner uten tilknytning til et selskap.

Who is this course for?

Ship Officers

Is previous experience required?

Documented 12 months seaservice as an officer onboard an ISPS vessel. 

How will this course benefit me?

After successfully completing this course, you should be able to undertake the duties and responsibilities of a Ship Security Officer, as defined in section A/12.2 of the ISPS Code and in section A-VI/5 of the STCW Code. The course enables you to maintain and supervise the implementation of the Ship Security Plan, evaluate the security risk, threat and vulnerability, make regular inspections to ensure that appropriate safeguards are implemented and maintained, and ensure that the security systems are operated, tested and calibrated correctly.

How will this course benefit my company?

By ensuring you are qualified and certified as a Ship Security Officer (SSO).

What standards are referred to in this course?

STCW A-VI/5 and ISPS code section A/12.2.

The course is approved by the Norwegian maritime Authority. Approved certificate as Ship Security Officer will be issued upon course completion.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%. 

This course is a combined training consisting of: Elearning and onboard training (exercises and checklists).

To complete the course, it is required that you are employed by a company which has a plan for onboard training with these kind of activities.

The course will not be approved for any persons without a connection to a company as described above.

Hensikten med kurset er å gi personell om bord skip underlagt IGF koden en introduksjon om driften av denne type skip. Kurset fokuserer på å skape bevissthet rundt LFF som drivstoff. Kurset er utviklet og gjennomføres i samsvar med IMO model course 7:13.

1. januar 2017 ble IGF-koden obligatorisk og STCW inneholder nå nye minimumskrav til opplæring og kvalifikasjoner av personell på skip som er underlagt IGF-koden. Dette treningsprogrammet er godkjent av Sjøfartsdirektoratet. Opplæringen består av et e-læringskurs, praktiske øvelser ved et treningssenter og en eksamen. Etter fullført og bestått kurs utstedes kursbevis.

Den praktiske opplæringen gjennomføres på ulike sikkerhetssentre i Norge og i utlandet. Velg det mest hensiktsmessige treningssenteret for deg selv eller dine ansatte. Det er også mulig for våre instruktører å utføre de praktiske øvelsene hos kunde. Skulle dette være interessant, vennligst kontakt oss på: post@gassteknikk.no

IGF Advanced Webinar.

Deltakere må ha tilgjengelig PC m/kamera, mikrofon og høyttalere i tillegg til skrivesaker for oppgaveløsing. Ved påmelding mottar deltaker egen informasjon om kurset og lenke til innlogging i TrainingPortal. Her vil det være mulig å laste ned kurskompendium. Dette benyttes for løsning av oppgaver underveis i kurset.

Før webinar mottar hver en lenke med innlogging til forelesingen. Denne gjennomføres i Microsoft Teams.

Varighet: 3 dager

Hva kreves for å løse ut IGF Advanced sertifikat?

Etter gjennomført kurs må deltaker opptjene nødvendig praksis på et IGF fartøy. Godkjent praksis teller fra de har mottatt sitt IGF Basic sertifikat. I tillegg må de kunne dokumentere minimum 3 bunkringer før de kan søke ut sitt Advanced - sertifikat.

Se ytterligere beskrivelse på vår hjemmeside: www.gassteknikk.com eller på sjøfartsdirektoratets hjemmeside: https://sdir.no

Minimum antall deltakere = 6

Presentation

This training course aims at providing a general description of the requirements for the prevention of pollution by sewage from ships as defined by the Annex IV of the MARPOL Convention.

Objectives

On completion of the training, students will be able to:

Understand the MARPOL requirements for prevention of sewage pollution from ships.

Know the various sewage treatment systems which are accepted by the MARPOL Convention.

Know the equipment required on board different ship types.

Understand the criteria defined in the convention for the control of discharge of sewage.

Understand the requirements for survey and certification of ships.

Program

Introduction

Applicability

Definitions

Equipment

Types of sewage systems

Sewage treatment plant

Holding tank

Sewage comminuting and disinfecting system

Standard discharge connection

The special case of livestock carriers

Discharge criteria

Discharge of sewage from ships other than passenger ships

Discharge of sewage from passenger ships outside special areas

Discharge of sewage from passenger ships within a special area

Survey and certification

International Sewage Pollution Prevention Certificate

Certificate entries: Number of persons the ship is certified to carry; New or existing ship; 

New or existing passenger ship for the application of Regulation 11.3

Survey requirements

Type Approval Certificate for sewage treatment plants

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of MARPOL Sewage Pollution, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of MARPOL Sewage Pollution is obtained after completion of the course and passing the online test.

Who is the course for?

This course is for personnel who require an insight into Norwegian maritime rules and regulations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide learners with an introduction to the Norwegian maritime rules and regulations and to provide details of how much of an influence Norway has over the global maritime industry.

How will the course benefit my company?

This course will benefit shipping operators and companies by ensuring that their staff have an awareness of the Norwegian Maritime Authority, Norwegian maritime rules and regulations and all other relevant legislation.

What standards are referenced in the course?

International Safety Management (ISM) Code

Freedom of Information Act

Norwegian International Ship Register Act

Ship Labour Act

Ship Safety and Security Act

Norwegian Maritime Act

International Convention for the Safety of Life at Sea (SOLAS)

International Regulations for Preventing Collisions at Sea (COLREGS)

International Convention for the Prevention of Pollution from Ships (MARPOL)

International Ship and Port Facility Security (ISPS) Code

Norwegian Maritime Code

Maritime Labour Convention (MLC)

Equality and Anti-discrimination Act

Accommodation of Crews Convention

Principles of Safe Manning

International Convention on Standards of Training, Certification and Watchkeeping for Seafarer (STCW)

Norwegian Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Presentation

This training course is about what an effective cyber security risk management should be. Its goal is not to address too many technical questions as the best technical expertise in the world won’t guarantee zero cyber risk. The course aims at providing your Company with a real battle plan: know the assets, know the enemies, organize accordingly and train the effectives. Although this will not be enough to avoid a cyber incident, the severity of the consequences of a cyber incident will depend on the company’s preparedness and ability to manage it.

Who the course is for?

The course ISM Code and Cyber Risk Management is aimed at anyone interested in understanding how an effective cyber security risk management should be. This may include Top Management of Shipping Companies, Ship Managers, Technical Superintendents, Ship Masters, Officers and Seafarers; Offshore Units Operators and Technical Staff, Shipyards Technical Staff; Surveyors; P&I and/or Insurance Inspectors; etc.

Objectives

On completion of the training, students will be able to:

Know what cyber security is, the main threats and their consequences.

Understand how to consider the cyber risks in the Safety Management System and how the ISM Code translated into cyber security.

Know the 12 cybersecurity commandments that will help implementing an efficient cyber risk management system.

Presentation

This training course provides a general overview of the SOLAS requirements concerning radio communications and the Global Maritime Distress and Safety System (GMDSS).

Objectives

On completion of the training, students will be able to:

Know the requirements concerning radio communication equipment on board ships and offshore units.

Understand the GMDSS functional requirements.

Understand the means required for GMDSS tests and drills on board.

Know the requirements for EPIRB, radio lifesaving appliances and sources of energy for radio communication equipment.

Program

Safety radio surveys and certification

GMDSS functional requirements

o Land and satellite communications

o Inmarsat

o Functional requirements while at sea

o Distress urgency and safety radio communications

o Sea areas

o Maintenance of radio installation

o Maintenance of satellite EPIRB

o Maritime safety information

GMDSS equipment

o Equipment to be provided on board

o Core installation

o Inmarsat EGC

o NAVTEX

o Satellite EPIRB and VHF EPIRB

o Search and Rescue Transponder (SART)

o Digital Selective Calling (DSC)

o Two-way VHF radio-telephone

Main, emergency and reserve sources of power

Automatic battery chargers

Uninterrupted power supply (UPS)

Certificate

On completion of the training program, the student will be awarded:

A Certificate of SOLAS Safety Radio, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of SOLAS Safety Radio is obtained after completion of the course and passing the online test.

ISM-koden (International safety management code – A.741(18)) er en internasjonal sikkerhetsstyringsstandard for drift av fartøy (flyttbare installasjoner til sjøs) og hindring av forurensing. Tolv år etter at ISM koden ble obligatorisk, gjennomførte IMO den første revideringen (gjennomgang) av koden. Endringene ble gjort gjeldende fra og med juli 2010. Den siste “oppdateringen” (forandringer) av ISM koden (2014) er gjeldende fra og med 2015. I 2017 vedtok den internasjonale maritime organisasjonen (IMO) kravet om Maritime Cyber risikostyring (datasikkerhet). Datasikkerhet skal nå være en integrert del av rederiets risikostyring for å håndtere risikoen for sine skip. Fra og med 2021 er kravet at håndtering av cyberrisikoer er innarbeidet i rederiers sikkerhetsstyringssystem.

Kurset tar for seg ISM kodens oppbygning og krav satt i koden. Samt hvordan selskapet (rederi) delegerer, og hvordan de involverte ivaretar sine oppgaver og plikter.

Kursdeltagerne skal etter gjennomført kurs forstå bakgrunn og formål med ISM koden. Selskapet sitt ansvar, samt være i stand til å bidra med å gjennomføre, evaluere og kontinuerlig forbedre et selskap sitt styringssystem.

Presentation

This training course provides a general overview of the MARPOL requirements to prevent air pollution from ships and offshore units.

Objectives

On completion of the training, students will be able to:

Know the international regulations related to the prevention of air pollution from ships and offshore units.

Understand the requirements for the control of emissions of substances from ships and offshore units.

Get familiar with the requirements concerning shipboard incineration and fuel oil quality.

Understand the concept of energy efficiency and related MARPOL requirements.

Know the various surveys required and the different certificates and documents to be available on board.

Program

Application

International regulations: ozone-depleting substances (ODS), nitrogen oxides (NOx)

Control of emissions

o Ozone-depleting substances (ODS)

o Nitrogen oxides (NOx)

o Sulphur oxides (SOx) and particulate matter

o Volatile organic compounds (VOC)

Shipboard incineration

Fuel oil quality

Bunker delivery notes

Energy efficiency design index (EEDI)

Ship energy efficiency management plan (SEEMP)

Survey and certification

Certificate

On completion of the training program, the student will be awarded:

A Certificate of MARPOL Air Pollution, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of MARPOL Air Pollution is obtained after completion of the course and passing the online test.

Presentation

This training course composed of 2 modules provides an overview of the requirements of the Ballast Water Management International Convention and the technical aspects related to the ballast water treatment equipment.

Objectives

On completion of the training, students will be able to:

Understand the background of the Ballast Water Management Convention, its structure and the most important regulations

Know the difference between the ballast water exchange and the performance standards

Understand the role of all stakeholders and actors

Be familiar with the approval, inspections, commissioning and tests of Ballast Water

Management systems

Understand the survey and certification requirements

Be familiar with the different technologies used and the installation requirements

Program

Module 1 – BWM Regulatory Aspects

Background

The Ballast Water Management Convention

Duties of the main stakeholders 

Ballast Water Management Standards

USCG Position 

Module 2 – BWM Technical Aspects

BWM Surveys

International Ballast Water Management Certificate

BWM System Approval

Sampling

Ballast water treatment systems technologies

Ballast water treatment systems installation

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Ballast Water Management, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Ballast Water Management is obtained after completion of the course and passing the online test. 

Presentation

This training course aims at providing an overview of the Port State Control background, organisation and procedures. It includes a description of the Port State Control inspection process, the criteria for selection of ships for inspection and the most common detainable deficiencies.

Objectives

On completion of the training, students will be able to:

Know the background and organisation of the various Port State Control regimes around the world

Understand the Port State Control procedures, the criteria for selection of ships for inspection and the inspection process

Know the various publications issued regularly by the different Port State Control regimes 

Get familiar with the most common deficiencies which may lead to ship’s detention

Program

PSC background and organisation

Purpose

Regulations

Regional Port State Control organisations

PSC procedures

Relevant instruments

Selection of ships for inspection

Inspection and selection scheme – Scope, priority and frequency of inspection

Paris MOU – New Inspection Regime (NIR) factors

PSC inspection process

Initial inspection

Clear grounds for more detailed inspection

More detailed inspection

Ship detention

Banning of ships

Publication of information

Detainable deficiencies

Examples of detainable deficiencies

Under SOLAS Convention

Under Load Lines Convention

Under MARPOL Convention

Under Chemical and Gas Codes

Under STCW Convention

Under ILO Conventions

Statistics from various PSCs

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of Port State Control, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Port State Control is obtained after completion of the course and passing the online test.

Presentation

This training course provides a general introduction to the most important maritime regulatory bodies: the International Maritime Organisation (IMO), the International Association of Classification Societies (IACS) and the European Maritime Safety Agency (EMSA).

Objectives

On completion of the training, students will be able to:

Understand the mission and structure of IMO, know the IMO requirements and the main International Conventions, and understand the process of acceptance, adoption and implementation of International Conventions.

Know the history of IACS and its mission, understand the IACS organization and the role of each entity, and know the main types of documents issued by IACS and how they are implemented.

Understand the European context, the role of the European Maritime Safety Agency (EMSA), and know the key points of the EU Regulation on common standards for ship inspection and survey organisations.

Program

Module 1 – IMO

IMO Mission

IMO History

IMO Organisation

IMO Regulations

Implementation of IMO Regulations

IMO Technical Assistance

Module 2 – IACS

IACS History

IACS membership evolution and current members

Membership criteria

The mission of Classification Societies and what Classification Societies do not do

IACS aims

IACS values – Leadership, technical knowledge, quality performance, transparency

IACS Organisation

Work programme and work process

IACS Panels

IACS main documents

Module 3 – EMSA

The European context

EMSA purpose and mission

EMSA structure

Regulation (EC) No 391/2009 

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Maritime Regulatory Bodies, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Maritime Regulatory Bodies is obtained after completing the course and passing the online test.

Presentation

This training course provides a general overview of the MARPOL requirements concerning the protection against oil pollution from machinery spaces.

Objectives

On completion of the training, students will be able to:

Understand the means for control of discharge of oil residues and the requirements for oil filtering equipment and 15 ppm alarm.

Get familiar with the Oil Record Book, SOPEP booklet and the required drills.

Know the details of MARPOL surveys and the certificates to be issued.

Know the most common PSC deficiencies related to MARPOL Annex I.

Program

History of MARPOL Convention

Survey and certification

Sludge tanks

Oil fuel tank protection

Standard discharge connection

Oil filtering equipment: 

o Bilge water waste system

o Oily water separator

o Piping system

o Documentation

Control of discharge of oil

Oil record book

Shipboard oil pollution emergency plan

Scope of the different surveys required

PSC inspection and most common deficiencies

Certificate

On completion of the training program, the student will be awarded:

A Certificate of MARPOL Oil Pollution from Machinery Spaces, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of MARPOL Oil Pollution from Machinery Spaces is obtained after completion of the course and passing the online test.

Presentation

This training course provides a general overview of the MARPOL requirements concerning the protection against oil pollution from cargo spaces of oil tankers.

Objectives

On completion of the training, students will be able to:

Understand the MARPOL requirements for the prevention of oil pollution from cargo spaces of oil tankers.

Get familiar with the pollution prevention equipment required by the MARPOL Convention.

Know the requirements for survey and certification of oil tankers.

Program

Segregated ballast tanks

Double hull and double bottom

Pump-room bottom protection

Subdivision and stability

Slop tanks

Pumping, piping and discharge arrangements

Oil discharge monitoring and control system

Oil/water interface detector

Crude oil washing system

Control of discharge of oil

Oil record book part II

Ship-to-ship transfer

Survey and certification, type-approval certificates

Different survey types

Certificate

On completion of the training program, the student will be awarded:

A Certificate of MARPOL Oil Pollution from Cargo Spaces, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of MARPOL Oil Pollution from Cargo Spaces is obtained after completion of the course and passing the online test.

Presentation

This training course composed of 4 modules provides an overview of the Polar Code. It includes a general presentation of the Polar Code, the certification process, the safety requirements and the environmental protection requirements.

Objectives

On completion of the training, students will be able to:

Understand the main sources of hazards associated with the operations in polar waters and be familiar with the general principles, structure and philosophy of the Polar Code.

Know the main steps of the certification process, the operational assessment methodologies used to establish the operational limitations in ice operations, the requirements and contents of the Polar Water Operational Manual, and the survey and certification requirements.

Have a general understanding of the safety requirements concerning ship’s design and construction, machinery installations, safety equipment and fire protection, safety of navigation and communication equipment.

Get familiar with the requirements for operations in polar waters and training of crew.

Understand the Polar Code requirements for protection against oil pollution, NLS pollution, sewage pollution and garbage disposal.

Program

Module 1 – The Code

Introduction

Regulatory framework

The Polar Code

Module 2 – Certification Process

Certification overview

Operational assessment

Polar Water Operational Manual

Surveys and Certification

Polaris

BV Rules 

Module 3 – Safety Requirements

What does the Polar Code mean for safety?

Design and Construction

Equipment

Fire protection

Life-saving appliances

Operations and manning 

Module 4 – Environmental protection

How the Polar Code protects the environment?

Pollution prevention

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of Polar Code, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Polar Code is obtained after completion of the course and passing the online test.

Presentation

This training course covers the requirements of SOLAS Convention concerning the safety equipment of cargo ships. It includes the documentation required on board, life-saving appliances, firefighting equipment, the safety of navigation, safety equipment in general and additional requirements for tankers.

Objectives

On completion of the training, students will be able to:

Know the documentation required to be available on board and understand the requirements of the STCW Convention for safe manning crew members. 

Understand the requirements concerning personal life-saving appliances, survival crafts, rescue boats, and launching and recovery arrangements.

Understand the requirements for fire protection, fire detection and fire extinguishing systems, and get familiar with the specific requirements for the carriage of dangerous goods.

Know what are the navigational equipment and appliances required to ensure the safety of navigation and get familiar with other safety equipment required on board.

Understand the additional requirements applicable for tankers and get familiar with inert gas systems

Program

Module 1 – Documentation on Board

Module 2 – Life-Saving Appliances

Module 3 – Fire Fighting Equipment

Module 4 – Safety of Navigation

Module 5 – Safety in General

Module 6 – Additional Requirements for Tankers

Certificate

On completion of the training program, the student will be awarded:

A Certificate of SOLAS Safety Equipment, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of SOLAS Safety Equipment is obtained after completing the course and passing the online test.

Presentation

This training course aims at providing an overview of the shipping community, the main players intervening on a ship and the different roles they play. It provides general information about ship owners and managers, flag administrations, classification societies, insurance companies, port state control, operational players and specialized press.

Objectives

On completion of the training, students will be able to:

Discover the different actors and organisms related with shipping

Know the relationship between the various shipping actors

Understand the role of the different shipping actors

Program

Overview of the major shipping players

Ship Owners

Categories of ship owners

Ship managers

Professional associations

BIMCO

ICS

INTERTANKO

INTERCARGO

CLIA

SIGTTO

IMCA

Flag

General

International Maritime Organization (IMO)

International Labour Organization (ILO)

European Maritime Safety Agency (EMSA)

United States Coast Guard (USCG)

Classification

Classification Societies

International Association of Classification Societies (IACS)

Insurance

Underwriters

Protection & Indemnity (P&I) Clubs

Operational players

Crew

Chartering

Ports

Agents

Maintenance

Port State Control (PSC)

PSC and PSCO

Equasis

Media

Certificate

On completion of the training program, the student will be awarded: 

A Certificate of Shipping, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Shipping is obtained after completion of the course and passing the online test.