Course catalogue

Who is the course for?

Any personnel with a desire to improve their ability to establish and maintain high performance standards onboard.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

Assertiveness involves speaking up, challenging others by asking thoughtful questions and taking initiatives when working with others. It constitutes of a confident and self-assured attitude and behavior. This course presents the perfect opportunity for you as a seafarer to be proactive and showcase that you are ready to meet the industry's modern-day demands.

How will the course benefit my company?

Employers are now incorporating seafarer’s soft skills into their crewing decisions. The soft, ‘non-technical skills’ are increasingly important on board due to the rapidly changing workforce and automation of technical tasks. Additionally, maritime accident investigations indicate that a lack of soft skills and human error is the most common reason behind accidents at sea.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

STCW Training programme for courses approved by the Norwegian Maritime Authority (NMA).

This training programme consists of three elements:

• This eLearning module (ETC: 45 minutes)

• Practical training onboard (ETC: 15.5 hours), and

• The final exam (ETC: 30 minutes) 

Please read through the Evaluation Procedure  for more information prior to starting the training programme.

Who is this course for?

Any person conducting an in-service assessment of the competence of an on-oboard candidate.

Is previous experience required?

 Documented 12 months sea service in an officer position is required. 

How will this course benefit me?

The aim of this course is to enable you to supervise  training and monitor the competence of seafarers. A seafarer's competence must meet the standards of the STCW Code.

How will this course benefit my company?

By ensuring you are qualified and certified as an Onboard Assessor. 

What standards are referred to in this course?

STCW Onboard Assessor (A-I/6)

Is there an assessment?

The exam includes questions on the theory aspects covered during the initial eLearning AND the activities completed during the onboard assessment. You should not attempt the exam until you have completed both aspects of the training.

Certificate:

When the training is completed a certificate is issued by the Norwegian Maritime Authority.

The Norwegian Maritime Authority charge an additional fee to issue the formal STCW Certificate.

Who is the course for?

Personnel who require an understanding of major accidents in the maritime industry.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an introduction to major accident hazards.

How will the course benefit my company?

This course will provide personnel with an introduction to major accident hazards and the role that they play in the mitigation of catastrophic events.

What standards are referenced in the course?

Safety and Environmentally Critical Elements (SECE)

ISM Code

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course aims to provide learners with an overview of industry best practice in relation to confined space entry work.

Learning Objectives

- LO1 Explain what is meant by a Confined Space
- LO2 Give examples of Confined Spaces
- LO3 Describe the dangers that can be caused by confined space entry work
- LO4 Identify the legal requirements associated with confined space entry work
- LO5 Explain how to avoid entering confined spaces
- LO6 Explain the importance of having a Safe System of Work in place
- LO7 Describe individual roles and responsibilities involved in Confined Space Entry work
- LO8 Explain the requirements for gas testing
- LO9 Identify acceptable levels for atmospheric test results
- LO10 Give examples of Confined Space Entry site safety equipment
- LO11 Explain the actions to take in an emergency situation
- LO12 Explain Confined Space Entry alarm procedures

This course focuses on prevention of Dropped Objects and employs Samarbeid for Sikkerhet latest revision of the handbook, recommendation 024 (revision 4. 2018) as normative. 

Through increased understanding of the term Dropped Objects, the use of practical tools, aids and methods, the intention is for course participants to be more observant about dropped objects in their daily work. 

This revision was released on the 24.02.20. 

Course content: 

- Dropped Objects tools
- Dropped Objects categories
- Observation techniques 
- Barriers 
- How to improve Dropped Objects findings

Contact details: 

Please contact AAK Energy for more information: 


E-mail:post.aak@nog.no            
Contact person: Inge Køhl

Who is the course for?

Personnel who require a basic understanding of the operation of diesel engines and the importance of maintaining good lubrication for their safe operation.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an overview of how diesel engines operate, their components and their use within the industry. It will also outline the importance of maintaining good lubrication for their safe operation.

How will the course benefit my company?

This course will provide personnel with an overview of how diesel engines operate and the importance of maintaining good lubrication for their safe operation.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Yes

Who is the course for?

All personnel who may have to carry out manual handling duties.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with information to help reduce the risk of injury due to incorrect manual handling.

How will the course benefit my company?

By reducing lost time due to injury as a result of poor manual handling techniques.

What standards are referenced in the course?

• International Labour Organisation

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All personnel who are involved in the process of the Tanker Management Self Assessment program.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give learners an awareness of TMSA and the audit criteria for the enhancement of safety on board tanker ships.

How will the course benefit my company?

The course will ensure that learners are following best practices as detailed in national/international legislation as well as operator procedures.

What standards are referenced in the course?

International Safety Management (ISM) Code

Oil Operators International Marine Forum (OCIMF)

The International Convention for the Prevention of Pollution from Ships (MARPOL)

The Code of Safe Working Practices for Merchant Seafarers (COSWP)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Obligatory working environment training for safety deputies and union officials, completed as e-learning combined with classroom training. 

The course provides basic working environment training in accordance with the main contract between The Norwegian Confederation of Trade Unions (LO) and The Confederation of Norwegian Enterprise (NHO).

Course Content

E-learning

Interactive exercise sequences, video clips, and animations are used to illustrate the topics.

The course provides insight into why HSE work is important, using The Working Environment Act as a tool.

Knowledge of roles and responsibilities in relation to the working environment.

Using systematic methods for improving the working environment and for solving working environment issues.

Classroom Training

This internal company gathering can be conducted and organised by the company itself, or in collaboration with Mintra/The Federation of Norwegian Industries. If you would like Mintra/The Federation of Norwegian Industries to conduct the training, a minimum of 10 people must be enrolled.

If your company would prefer to conduct the training, relating content to internal routines and conditions, Mintra will contribute with documentation and information that describe activities related to this training. 

Contact us to find a suitable implementation model!

Who is the course for?

All personnel that come into contact with compressed air through maintenance or usage.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring.

How will the course benefit my company?

To reduce compressed air incidents and accidents.

What standards are referenced in the course?

No standard or regulations are referenced in this course

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Deck Officers.

Is previous experience required?

No previous experience is required.

How will the course benefit me?

By providing you with an understanding of AIS, its navigational uses and limitations.

How will the course benefit my company?

By enabling deck officers to utilise AIS during watchkeeping and collision avoidance to its full potential while being aware of the limitations.

What standards are referenced in the course?

• International Electrotechnical Commission Standard 61993-2

• International Telecommunication Union Recommendation M.1371-5

• International Maritime Organization Resolution A.1106(29)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Personnel responsible for cooking, preparing or handing food and others working in the kitchen/galley/dining areas.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an introduction to industry best practice in relation to food safety, health and hygiene.

How will this course benefit my company?

This course will provide personnel with an introduction to industry best practice in relation food safety, health and hygiene and help reinforce the importance of good food safety practices in the workplace.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for:
Maritime personnel, onshore and offshore.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?
The course looks at the purpose of the ISM Code, which is to maintain safety in international shipping, reduce pollution from vessels, protect the exterior environment and prevent injury or loss of human life.

How will this course benefit my company?

By ensuring you have the knowledge of the purpose of the ISM Code.

What standards are referred to in this course?

The International Convention for the Safety of Life at Sea (SOLAS)

The International Ship and Port Facility Security (ISPS) Code 

The International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

The International Safety Management (ISM) Code 

The International Convention for the Prevention of Pollution from Ships (MARPOL)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Ratings and junior engineers new to marine engineering.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will enable you to understand the purpose of a boiler on board and its basic requirements. It will also provide you with some basic safety knowledge.

How will the course benefit my company?

By providing your engineers and ratings with basic knowledge on boiler operations on board.

What standards are referenced in the course?

International Convention for the Safety of Life at Sea (SOLAS)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Deck Officers and Ratings who require knowledge on the storage and transport of different types of liquid.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give learners an overview of how liquids such as heavy fuel oils should be stored.

How will the course benefit my company?

The course will ensure that learners know how to safely store liquids, which will result in fewer safety incidents.

What standards are referenced in the course?

No regulations are standards are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?
Management staff and persons with responsibilites related to seafarers.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide an overall understanding of the requirements of the Maritime Labour Convention (MLC) and the responsibilities of managers in relation to achieving, managing and maintaining compliance.

How will this course benefit my company?
By ensuring you have an understanding of the Maritime Labour Convention (MLC) and the resposibilities thereto.

What standards are referred to in this course?
Maritime Labour Convention (MLC2006)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Junior engineers, Junior Electrotechnical officers (ETO), Junior Deck Officers, Deck and Technical Ratings.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an introduction to how steering gear operates and the potential challenges with operation.

How will the course benefit my company?

This course will provide junior members of staff with an introduction on how steering gear operates.

What standards are referenced in the course?

International Convention for the Safety of Life at Sea (SOLAS)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

The Working Environment Act, section 3-5, obligates employers and executives to complete HSE training. This course satisfies the requirements for HSE training for executives and managers.

The course contains the following modules: 

• A working life changing

• The Working Environment Act

• Risk Managament

• Healthy enough to work?

• Systematic HSE work

Who is this course for?

This course is aimed towards all personnel who use abrasive wheels in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

How will this course benefit my company?

The course will benefit companies by providing personnel with knowledge of how to avoid risks and hazards when using abrasive wheels, subsequently reducing accidents and injuries in the workplace.

What standards are referred to in this course? 

• Provision and Use of Work Equipment Regulations (PUWER) 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel that may be exposed to environments containing nitrogen.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing knowledge in the risks of entering a nitrogen environment.

How will the course benefit my company?

By reducing Nitrogen exposure risks.

What standards are referenced in the course?

No standards or regulations are referenced in this course. 

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.