Course catalogue

Who is this course for?
Key employees (IT and HR staff, board members)

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course is designed to raise the awareness how organisations, and all employees in contact with personal data are affected by GDPR Legislation (2018).

The course gives an overview of definitions, roles and responsibilities, the rights of individuals and the obligations of businesses with respect to the regulation.

We examine the territorial scope and outline the general requirements, technical solutions and administrative routines required for GDPR compliance, whilst also examining how to handle the issues sourrounding a data breach, should it occur.

The course content is developed in cooperation with Advokatfirmaet Schjødt AS.

How will this course benefit my company?
By ensuring you have the awareness of how organisations, and all employees in contact with personal data are affected by GDPR Legislation (2018).

What standards are referred to in this course?
EU's General Data Protection Regulation - GDPR (2018)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an introduction to or awareness of the Maritime Labour Convention.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course is designed to give an overall understanding of the Maritime Labour Convention and its importance to you as a seafarer or as a person with responsibilities relating to seafarers.

How will this course benefit my company?

By ensuring you have an overall understanding of the Maritime Labour Convention.

What standards are referred to in this course?

Maritime Labour Convention (MLC2006)

The ILO’s Declaration on Fundamental Principles and Rights at Work

Is there an assessment?

Yes

Who is this course for?

This course is for all personnel involved in the planning, execution or supervision of gas measurement on board.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to dangerous atmospheres on board, how to detect and measure toxic and flammable gases, and the precautions and procedures to follow when entering confined spaces, enhancing their safety mindset.

How will this course benefit my company?

This course aims to provide information about the types of gases found in the maritime industry, the hazards involved when dealing with these substances and provides a general knowledge of how these gases are detected and measured in order to reduce incidents related to gas measurement.

What standards are referred to in this course?

• International Convention for the Safety of Life at Sea (SOLAS)

• International Safety Guide for Oil Tankers and Terminals

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Obligatory working environment training for safety deputies and union officials, completed as e-learning combined with classroom training. 

The course provides basic working environment training in accordance with the main contract between The Norwegian Confederation of Trade Unions (LO) and The Confederation of Norwegian Enterprise (NHO).

Course Content

E-learning

Interactive exercise sequences, video clips, and animations are used to illustrate the topics.

The course provides insight into why HSE work is important, using The Working Environment Act as a tool.

Knowledge of roles and responsibilities in relation to the working environment.

Using systematic methods for improving the working environment and for solving working environment issues.

Classroom Training

This internal company gathering can be conducted and organised by the company itself, or in collaboration with Mintra/The Federation of Norwegian Industries. If you would like Mintra/The Federation of Norwegian Industries to conduct the training, a minimum of 10 people must be enrolled.

If your company would prefer to conduct the training, relating content to internal routines and conditions, Mintra will contribute with documentation and information that describe activities related to this training. 

Contact us to find a suitable implementation model!

Who is this course for?

Personnel responsible for cooking, preparing or handing food and others working in the kitchen/galley/dining areas.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an introduction to industry best practice in relation to food safety, health and hygiene.

How will this course benefit my company?

This course will provide personnel with an introduction to industry best practice in relation food safety, health and hygiene and help reinforce the importance of good food safety practices in the workplace.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel who require an awareness of the hazards of working in cold climates

Is previous experience required?

Previous experience is not required to complete this course.

How will the course benefit me?

This course will identify the clothing and Personal Protective Equipment that should be used when working in cold climates.

How will the course benefit my company?

By providing your personnel with an understanding of the hazards of working in cold climates and the clothing and Personal Protective Equipment that should be worn to protect themselves from the elements.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Maritime personnel, onshore and offshore

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will the course benefit me?

The course looks at the purpose of the ISM code which is to maintain safety in international shipping, reduce pollution from vessels, protect the exterior environment and prevent injury or loss of human life.

How will the course benefit my company?

By ensuring you have the knowledge of the purpose of the ISM code.

What standards are referenced in the course?

ISM code

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All personnel involved in carrying out tasks under a Permit to Work system and those responsible for the Control of Work.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with an overview of the requirements and operation of a typical Permit to Work system

How will the course benefit my company?

By ensuring that personnel are familiar with the requirements and operation of a typical Permit to Work system.

What standards are referenced in the course?

The International Maritime Organization (IMO)

Health and Safety at Work Act

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All Maritime personnel who work with hand and power tools.

Is previous experience required?

No prior knowledge or experience is required to complete this course.

How will the course benefit me?

This course will provide knowledge on hand and power tool safety.

How will the course benefit my company?

This course is intended to help prevent lost time accidents.

What standards are referenced in the course?

There are no regulations or standards referenced in this course.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course focuses on prevention of Dropped Objects and employs Samarbeid for Sikkerhet latest revision of the handbook, recommendation 024 (revision 4. 2018) as normative. 

Through increased understanding of the term Dropped Objects, the use of practical tools, aids and methods, the intention is for course participants to be more observant about dropped objects in their daily work. 

This revision was released on the 24.02.20. 

Course content: 

- Dropped Objects tools
- Dropped Objects categories
- Observation techniques 
- Barriers 
- How to improve Dropped Objects findings

Contact details: 

Please contact AAK Energy for more information: 


E-mail:post.aak@nog.no            
Contact person: Inge Køhl

Who is the course for?

Any personnel operating galley equipment, such as Cooks or Stewards.

Is previous experience required?

No previous experience is required.

How will the course benefit me?

By providing you with clear guidance for the safe operation of galley equipment to minimise the chance of injury or damage.

How will the course benefit my company?

By minimising the risk for galley equipment related accidents and increasing the safety of a crucial part of each vessel.

What standards are referenced in the course?

International Convention for the Prevention of Pollution from Ships (MARPOL)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course aims to provide learners with an overview of industry best practice in relation to confined space entry work.

Learning Objectives

- LO1 Explain what is meant by a Confined Space
- LO2 Give examples of Confined Spaces
- LO3 Describe the dangers that can be caused by confined space entry work
- LO4 Identify the legal requirements associated with confined space entry work
- LO5 Explain how to avoid entering confined spaces
- LO6 Explain the importance of having a Safe System of Work in place
- LO7 Describe individual roles and responsibilities involved in Confined Space Entry work
- LO8 Explain the requirements for gas testing
- LO9 Identify acceptable levels for atmospheric test results
- LO10 Give examples of Confined Space Entry site safety equipment
- LO11 Explain the actions to take in an emergency situation
- LO12 Explain Confined Space Entry alarm procedures

Who is the course for?

Any personnel with a desire to improve their ability to establish and maintain high performance standards onboard.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

Assertiveness involves speaking up, challenging others by asking thoughtful questions and taking initiatives when working with others. It constitutes of a confident and self-assured attitude and behavior. This course presents the perfect opportunity for you as a seafarer to be proactive and showcase that you are ready to meet the industry's modern-day demands.

How will the course benefit my company?

Employers are now incorporating seafarer’s soft skills into their crewing decisions. The soft, ‘non-technical skills’ are increasingly important on board due to the rapidly changing workforce and automation of technical tasks. Additionally, maritime accident investigations indicate that a lack of soft skills and human error is the most common reason behind accidents at sea.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for:
Maritime personnel, onshore and offshore.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?
The course looks at the purpose of the ISM Code, which is to maintain safety in international shipping, reduce pollution from vessels, protect the exterior environment and prevent injury or loss of human life.

How will this course benefit my company?

By ensuring you have the knowledge of the purpose of the ISM Code.

What standards are referred to in this course?

The International Convention for the Safety of Life at Sea (SOLAS)

The International Ship and Port Facility Security (ISPS) Code 

The International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

The International Safety Management (ISM) Code 

The International Convention for the Prevention of Pollution from Ships (MARPOL)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The course covers the following topics:

- What is psychosocial working environment?
- Characteristics of good and poor psychosocial environment
- Roles and responsibilities
- Prevention

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Who is this course for?
All personnel who are at risk for being exposed to benzene.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide learners with an awareness of benzene and provide best practice for work with benzene in oil and gas producing facilities.

How will this course benefit my company?
By ensuring you are aware of the impacts of benzene and familiar with best practice for work with benzene.

What standards are referred to in this course?
Norwegian Oil&Gas circulars NOG 130, 131&133
SOLAS - II/2/16.3.2
IMO circulars 1095 and 1220

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

This course looks at electrical installations in explosive atmospheres. The object of the course is to enable those working in explosive atmospheres to perform their work properly and safely.

This course fulfils the requirements for personnel working in explosive atmospheres. Theory is taken from CENELEC and IEC norms.

Text, images, videos, animations and 3D simulations will help give you a better understanding of explosive atmospheres and their particular characteristics.

Who is this course for?
Company Security Officer (CSO), Ship Security Officer (SSO), Ship's Master and Officers, Deck and Engine Ratings, Galley and Catering Staff, Office Operations Staff

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
Awareness of Best Management Practices to assist companies and ships in deterring and responding to piracy attacks and armed robbery.

How will this course benefit my company?
By ensuring you are aware of best practices in deterring and responding to piracy attacks and armed robbery.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

The Working Environment Act, section 3-5, obligates employers and executives to complete HSE training. This course satisfies the requirements for HSE training for executives and managers.

The course contains the following modules: 

• A working life changing

• The Working Environment Act

• Risk Managament

• Healthy enough to work?

• Systematic HSE work

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.