Course catalogue

Dette kurset vil gi fremtidige kranførere en god teoretisk grunnopplæring i sikker bruk av offshorekran. Opplæringen gir kandidatene god innsikt i prinsippene for offshorekraners konstruksjon, virkemåte, vedlikehold og bruk slik at uhell og ulykker i forbindelse med løfteoperasjoner unngås. Opplæringen dekker den teoretiske sikkerhetsopplæringen som kreves for G5 offshorekran, samt G20 fastmontert hydraulisk kran. Kurset avsluttes med en skriftlig teoretisk prøve. Når opplært person har bestått teoretisk prøve, samt eksamen for anhukere med tillegg av praktisk kjøreprøve på offshorekran, vil dette være grunnlag for utstedelse av kompetansebevis for fører av G5 offshorekran.

Kursinnhold:

- Innledning med definisjon på offshorekran

- Bruksområder for offshorekraner, fastmonterte hydrauliske kraner

- Ulykker med offshorekraner

- Lover og forskrifter vedr. offshorekraner 

- Krav til kranfører

- Oppbygging, konstruksjon og montering av forskjellige typer offshorekraner

- Fundament / pidestall

- Bomkonstruksjoner

- Elektrisk anlegg

- Hydraulikk / elektronikk

- Mekanikk

- Lastdiagram

- Sikkerhets- / overlastutstyr

- Vinsj / Ståltau / blokk 

- Kontroll og vedlikehold

- Sertifisering / dokumentasjon

- Sikker bruk av offshorekraner

- Øvingsoppgaver og eksamen

This course is only available in Norwegian.

Basic first aid for the wind industry.

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

- Global Wind Organization (GWO)

 - Labor Inspection (Regulations)

Competence for "First Aid" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Norwegian only

LEARNING OBJECTIVES

The objective of this course is to give the trainee DPOs as much hands-on experience as possible in the time available. This is achieved by running the candidates through intensive simulator training whilst being exposed to environmental and technical worst case scenarios. This will increase the candidate’s operational skills and knowledge in DP Operations.

CONTENT

• All the exercises are carried out on a full scale ship simulator
• DP operations planning and watch keeping procedures
• Handling of position reference systems
• Handling of various propulsion systems
• Repetition of various theoretical topics from the DPO
• Preparation and DPO Start courses upon request from course participants

LEARNING PROCESS

This course is designed to give the trainee DPO extensive hands-on training in the use of the DP in a number of varied worst case scenarios. Candidates for the DPO Experience volume training course must have completed the DPO Preparation and the DPO Start courses, or be able to document equivalent competence.

LEARNING PROCESS

This course is designed to give the trainee DPO extensive hands-on training in the use of the DP in a number of varied worst case scenarios. Candidates for the DPO Experience volume training course must have completed the DPO Preparation and the DPO Start courses, or be able to document equivalent competence.

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

LEARNING OBJECTIVES

This  course aim to provide knowledge, understanding and skills to conduct a safe and professional ship to ship (STS) transfer operations of crude oil, petroleum products, chemicals and liquefied gases, both at sea and in port.

CONTENT

• Introduction to STS
• Operation personnel
• STS Operation Procedure and Check Lists
• Interaction
• Communication
• Fenders
• Mooring
• External Forces
• Anchoring
• STS incidents

LEARNING PROCESS

The  course consists of totally nine theoretical lessons and nine selected simulator exercises. Participant  learning progress assessed by concurrent evaluation during both theory sessions and simulator exercises.

REFERENCES

OCIMF - Ship to ship transfer guide

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

LEARNING OBJECTIVES

After the course, the successful participants are able to:

• Carry out operational planning, risk assessment and hazard identification tasks
• Set up the DP system for a particular task
• Operate the communications
• Analyse the trends
• Discuss systems failures
• Decide on courses of action because of systems failures
• React to alarms and printer readout
• Initiate DP Alert status alarms
• React to all events occurring
• Operate the desk under normal and pressured conditions
• Practice effective teamwork
• Apply the lessons learned to date
• ASOGs

CONTENT

• Study of DP incidents
• Construction and use of work site diagrams, charts and vessel templates for use in DP operations
• Preparation of plans for a projected DP operation, contingency plans for expected deviations and emergencies
• Participation in simulated situations in a variety of DP operations while handling routine and emergency situations
• Risk and safety analysis, and defining DP equipment classes
• The DP system’s utilization of position measurements, and tests on position reference systems

LEARNING PROCESS

The training will be a combination of theoretical lessons and practical exercises. The participants will work with practical scenarios based on real operations, training on planning and executing specified operations under varying simulated conditions, including emergency handling

SPECIAL INFORMATION

The DP Simulator course is phase C of the Nautical Institute (NI) DP Operator Certification Scheme.

The course will be entered into the NI Dynamic  Positioning Operator’s Log Book.

CERTIFICATE

A certificate acceditated by the Nautical Institute will be issued on succcessful completion of the course.

Objective: The training is intended to provide personnel with good theoretical and practical basic training in the use and maintenance of steel ropes.

The course provides a thorough introduction to knowledge about steel ropes, the correct use / choice of steel ropes and what requirements are set for those who use and control steel ropes.

Regulations on the performance of work, use of work equipment and associated technical requirements (regulations on the performance of work) §10-1. Requirement for documented safety training for work equipment that requires special care during use 

When an employer after a risk assessment finds that the work equipment requires special care during use, only employees who have documented safety training according to §10-2 §10-2 can be used. Requirements for documented safety training when using work equipment

Anyone who is to use work equipment as mentioned in §10-1 and §10-3, must have practical and theoretical training that provides knowledge of construction, operation, use properties and area of use, as well as maintenance and control.

Content:

- Basic theory of steel ropes
- Construction
- Properties
- End parties
- Cast blocks / Wire discs
- The right choice of wire rope
- Proper use of wire ropes
- Proper winding and running in of steel ropes
- Maintenance of steel ropes
- Lubrication of steel ropes
- Damage to steel ropes
- Disposal rules
- Checking of wire ropes in accordance with standard ISO-4309
- Exam

Objective: The purpose of the course is to provide forklift drivers with a good theoretical basic training in the safe use of forklifts, so that accidents in connection with forklift driving are avoided.

Module 1.1 - Basic theoretical module
Module 2.2 -Forklift theory
Module 3.2 - Basic practice forklift.

The course is primarily aimed at future users of forklifts. But anyone who is involved with cargo handling and forklifts in risk analysis and work management can also benefit from the course.

The course is conducted with Norwegian-language teachers and teaching materials in accordance with legislation and regulations, as well as recognized curricula for module-based training.

The forklift driver training consists of four modules:

- Module 1.1 working environment, responsibilities and consequences. *
- Module 2.2 G4 bridge and overhead crane
- Module 3.2 Basic practical training forklift 
- Module 4.2 Practical driving training forklift
- Practical Final test in each forklift type T1-T4

* Module 1.1 is common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, let us know.

Module 4.2 can be completed in a company using a sponsorship arrangement. If you do not have the opportunity to do so, you can participate in one of STQ's practice courses.

Content:

- Safety training, laws, regulations
- Forklift types
- Electric forklift - construction
- Stability
- Daily inspection and maintenance
- Material and goods handling
- HMS
- Proper use of the forklift
- The theory course ends with a theoretical exam

Executive presence isn’t something you’re born with, it’s a combination of learned behaviors and characteristics that can be developed. Depending upon your personality, industry, business goals and challenges, executive presence can be manifested in different ways. 

Having great presentation skills and making a strong first impression based on your clothing and demeanor is not executive presence. You need more substantive abilities to face daily business challenges, speak your mind while maintaining your composure, or inspire your team to commit to a demanding new goal. Executive presence is a purposefully developed hybrid of internal character and external presentation. Let’s look at the qualities that distinguish great leaders from mediocre ones.

• Identify the attributes of executive presence

• Gauge your executive presence and gain insight

• Receive feedback in different forms

• Develop your own executive presence

People generally do business with people they like or look up to, and not just with a company. This means that successful leaders build their personal brand, resulting in the achievement of organizational goals. A personal brand can elevate you above the crowd and help you achieve your personal and professional goals. It is a constant and ever-changing process of identifying your goals, setting up a plan, and monitoring it consistently. Your brand is a combination of the skills you develop and the behavior you display. In this course, you will look at the traits of building a successful personal brand.

• Define personal brand

• Enlist strategy to build a personal brand

• State the steps to build a successful personal brand

When writing business emails, letters, memos, and other communications, it’s important to check for any grammar or spelling errors that can distract from your message. Misspelled words and grammatical errors are easy to fix if you make a habit of using the spellcheck and grammar features on your computer. In this course, we will review basic punctuation rules. We will examine some common sentence structure mistakes. And we’ll study some common word choice errors. Finally, we’ll provide a list of online resources and books. Don’t let grammar and word choice errors blur your message or damage your credibility.

• Use appropriate punctuations    

• Improve your sentence structure    

• Identify the common mistakes in word usage