Course catalogue

Objective: Through a combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in enclosed spaces.

The Norwegian Labor Inspection Authority has made major changes to the regulations. People who work in tanks and closed rooms are the biggest difference that the regulation "Work in tanks" has fallen away. This is replaced by section 29 of the regulations «execution of work», which states that all work in closed rooms shall be performed «without danger to life or health». A simple requirement that gives the employer a great deal of responsibility.

New SOLAS requirements: Exercises in closed rooms and rescue, as well as portable gas measuring equipment.

Applies to: All ships covered by SOLAS and all high-speed vessels, mobile offshore drilling units and dynamically positioned vessels

Our courses are in accordance with SOLAS-IMO requirements and the Norwegian Labor Inspection Authority - Execution of work

The definitions of a cramped space vary from country to country, but the usual criteria usually include:

- A room that is predominantly or completely closed
- Contains health and / or safety hazards
- Is not designed for continuous stay of employees
- Has entrances or exits that are small or difficult to access
- A room that is large enough that you can enter it completely and perform the work tasks you have been assigned
- Limited air circulation

Content:

- Review of public laws and regulations
- Know which constituents a safe breathing air contains
- How to make a gas measurement before entering
- Plan entry jobs and rescue operations in closed rooms
- Equipment knowledge
- Exercises in our training tank. We practice entry and use of fall protection equipment, rescue equipment, breathing air equipment and gas meter

Grunnleggende teoretisk og generell sikkerhetsopplæring i trykktesting iht. Forskrift om utførelse av arbeid best. 703.

Kursinnhold

- Trykk og testmedier

- Materiallære

- Bolter og skruer

- Kontroll og vedlikehold

- Gjenger og koblinger

- Sikkerhet

- Høytrykkspumper og boosterpumper

- Slanger

- Valg av testutstyr

- Prosedyrer

- Måleenheter/tabeller

- Arbeidsmiljø

- Avsluttende teoretisk prøve

The virtual interview can be a challenging and difficult process if you don’t prepare properly. You may face many challenges, such as technological, ambience related issues. However, to convene a successful interview, it is important to how to overcome these challenges. Branding your company is also one the challenges you may face when conducting virtual interview. Home setup throws various set of challenges, which one must overcome to have successful virtual interview. In this course, you will learn to overcome the challenges faced in conducting a successful virtual interview. 

• Identify the requisites of a pre-interview process

• List best practices while conducting interview virtually

• Identify post interview actionable

A dream doesn't become reality through magic; it takes sweat, determination and hard work.

 -Colin Powell 

A new methodology for innovation, “Trystorming” is a combination of “Brainstorming” and “Trying” something practically. This lesson highlights the difference between brainstorming and trystorming, and provides the guidelines for where and when it can be used. Trystorming is a practical approach to innovating by focusing on practically trying or experimenting within reasonable limits to understand the efficacy of an idea before implementing it fully. Take this lesson to pick up the basics of trystorming and lead innovations in your organization.

• Explain what is trystorming 

• Know the difference between trystorming and brainstorming 

• Describe the guidelines for trystorming and where it can be used

Presentation

This training course provides an overview of the Radiographic Testing (RT) method for non-destructive examination of materials and welding, its objectives and principles.

Objectives

On completion of the training, students will be able to:

Understand the basic physical principles of radiographic testing.

Know the testing procedure and the inspection process referred to the equipment and films used.

Differentiate applications and the acceptance criteria applied.

Get familiar with the purpose of reference accessories to ensure the image quality and the quality of test performance in general.

Program

History

Basic principle

o Radiation

o Films

o Radiographic image quality

Equipment and testing materials

o Radiation sources

o Film systems

o Image quality indicators

o Film viewing equipment

Testing procedure

o Selection of testing parameters

o Test arrangements

o Film processing

o Film evaluation

Applications and acceptance criteria

o Scope

o Weld inspection

o Indications

o Acceptance criteria

o Test report

Reliability, quality of test results

o Test performance

o Film viewing

o Film examination

o NDT personnel competence

o Safety aspects

Certificate

On completion of the training program, the student will be awarded:

A Certificate of NDT – Radiographic Testing, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of NDT – Radiographic Testing is obtained after completion of the course and passing the online test.

Over 50 years ago, a social psychologist Douglas McGregor of MIT published a book outlining his research of two contrasting management styles: Theory X and Theory Y.  

He argued that Theory X, based on hierarchy and power, was an outdated authoritarian “top-down” way of managing people. Theory Y, he proposed, was an improved, alternative method of management, one that was more participative and synergistic.

• Define Theory X and Y management styles 

• Describe Theory X and Y from the management’s and worker’s perspective 

• Differentiate between Theory X and Theory Y managerial styles

Sales effectiveness is the process of identifying and utilizing the right sales activities to generate the best sales outcomes. Your definition of a successful sale will depend upon your product, service, corporate goals, and objectives. Companies measure their effectiveness in a variety of ways: increased profit, new product sales, or shortened sales cycle. Successful sales organizations share a commitment to defining, measuring, and optimizing all of the components of their sales process in order to consistently achieve strategic goals. 

• Build an effective sales process   

• Measure your sales process  

• Practice the customer-centric sales approach

How much time do you spend developing your leadership succession plan? As older leaders begin to retire at greater rates, the 2018 Deloitte Millennial Survey discovered that 65% of potential millennial leaders feel unprepared to take their places. Forbes reports that by 2025, 75% of the workforce will be made up of millennials. These statistics suggest that there’s a leadership crisis on the horizon. Designing a strategy and framework to direct leadership development is mission critical for every organization. Training—and retaining —emerging leaders in your company should be a top priority. Understanding what team members want and expect from an employer will help you develop the right programs and systems to keep your talent engaged in learning, growing, and contributing to your organization.

• Retain your talented resource   

• Design a leadership development framework   

• Create a culture of learning

Presentation 

This training course describes the inclining test and lightweight measurement procedures. Inclining test is a test performed on a ship to determine her stability, lightship weight and the coordinates of her centre of gravity. The test is applied to newly constructed ships greater than 24 metres in length, and to ships altered in ways that could affect stability.

Objectives 

On completion of the training, students will be able to: 

Get familiar with the stability of vessels at sea. 

Know the forces involved in the movement of ships. 

Know the types of inclination and equilibrium. 

Understand how and when to perform an inclining test or lightweight check. 

Know the precautions to be taken to perform or witness such tests

Program

Intact stability 

o Introduction to stability and trim 

o Transverse intact stability 

o Characteristics of GM 

o Free surface effect 

o Trim and stability booklet 

Inclining experiment 

o Test description 

o The general condition of the ship 

o Inclining weights 

o Pendulums 

o Means of communication 

o Documentation 

o Inclining test procedures 

o Acceptance and exemptions 

Lightweight measurement 

o Test description 

o Lightweight measurement procedures 

Precautions to be taken to perform or witness these tests

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

o Certificate of Inclining Test and Lightweight Measurement awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Inclining Test and Lightweight Measurement, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination. 

Leadership education is an ongoing process. Your success will increase when you invest time in studying leadership models and characteristics, reading about great leaders, putting your knowledge into practice, and then evaluating the results. It takes different skills and abilities to successfully lead small and large teams. In this course, you will get familiarized with many advantages and disadvantages, as well as the best practices to be adopted to lead small and large teams successfully.

• Identify the strengths and challenges of large and small groups

• Examine the best practices for leading small teams

• Examine the best practices for leading large teams