Renewables

Course catalogue

hits
91
Course code: MTP-056
Course type: E-learning course
Duration: 20 minutes
Language: Norwegian / English
Price: NOK 550,-

The main idea behind the course is that knowledge about and reflection on what to do makes us feel more confident and able to make informed choices.  In a public area or at work, are you aware of what the premises look like, and how you can evacuate if a situation should occur? In order of priority you should act in this way; Run, Hide, Fight!

The course describes these guidelines in more details and also allows the user to reflect upon various aspects of an armed attack.

Course code: APP-010
Course type: E-learning course
Duration: 3 hours
Language: Polish
Price: NOK 650,-

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations offshore.

 

The course also provides first-aid instruction and training. CPR training must be completed separately.

 

In accordance with section 7 of FSE, FSE and and first-aid training must be completed at least once a year. In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

 

This course addresses a variety of issues and covers how to prevent electrical accidents, routines in the event of accidents, and theoretical first aid, and aims to help prevent harm to people, equipment, and installations.

Course code: MUK-007
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

This course aims to increase learners’ awareness of the risks of hand-arm vibration and the effects that it can cause. The course also looks at the control measures that should be taken to reduce exposure to vibration, based on industry best practice.

 

Course content

- Describe hand-arm vibration and the effects it can cause

- Explain what Hand Arm Vibration Syndrome (HAVS) is and how to identify its early symptoms

- Identify the types of jobs and equipment that are most likely to involve hand-arm vibration and expose workers to the risk of health effects

- Explain the duties of employers under the Control of Vibration at Work Regulations
- Outline the measures that employees can take to reduce the risk of HAVS
- Outline the duties of equipment manufacturers and suppliers in reducing vibration risks
- Describe the process of assessing the vibration risk to employees in accordance with the Exposure Action Value (EAV) and Exposure Limit Value (ELV)
- Describe the control measures that should be taken to reduce exposure to vibration
- Explain the importance of monitoring exposure to vibration, and health surveillance
- Explain the importance of information and training in reducing the risks to health from vibration

Course code: LSI-001
Course type: E-learning course
Duration: 1 hour
Language: Norwegian
Price: NOK 650,-

The goal of this course is that all personnel who use hazardous work equipment, will gain good knowledge of HSE when using work equipment. The course deals with personnel requirements, roles and responsibilities, as well as accidents and regulations on safety.

In addition, the course requires that practical training is conducted on applicable work equipment.

The course covers the following topics:

• Work equipment in general
• Use of work equipment
• Selection of work equipment
• Training in the use of work equipment
• Workspaces and personnel requirements
• Risk assessment
• Safety, accidents and liability
• Direct and underlying causes of accidents
• Relevant laws and regulations

The course includes exercises, and final test with 30 questions.

Course code: EBA-006
Course type: E-learning course
Duration: 1 time 40 minutter
Language: Polsk
Price: NOK 650,-

The course provides knowledge about the structure, operation, applications and usage, maintenance and monitoring of the appropriate tool. The training provides knowledge about the requirements for safe use and operation stipulated in regulations and instructions.

Along with a practical review of the tools, the course meets the requirements for documented training in hazardous work equipment in Regulations concerning the Performance of Work.

The course covers the following subjects:

- Introduction to general HSE
- Angle grinder
- Hammer drills, jackhammers and combihammers
- Powder actuated gun
- Nail gun
- Saws with blade (includes table saw, crosscut and miter Saw, circular saw, jigsaw and reciprocating saw)
- Chain saw

Course code: MUK-123
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: GBP 40,-

Course Goal: This course aims to provide an overview of the requirements for the safe handling of radioactive materials

 

Learning Objectives:

 

LO1 Define what is meant by ‘radioactive material

LO2 Identify the hazards associated with radiation

LO3     Explain how industrial radiography is used and the hazards associated with this technique

LO4 Identify the PPE requirements for handling radioactive materials

LO5 Give an overview of exposure limits for handling radioactive materials

LO6 Explain how the hazards associated with radioactive materials can be mitigated

LO7 Describe how radioactive waste should be stored

LO8 Explain what should be done in the event of an emergency situation involving radiation

Course code: EXT-005
Course type: E-learning course
Duration: 5-hour e-learning
Language: English, Norwegian
Price: NOK 6200,-

The concept intrinsic safety is unlike the other Ex protection concepts as it is a system concept. Therefore, it is necessary to understand the system as a whole, how the environment and individual components affect the system to maintain the integrity of the intrinsically safe system.

Exi protection concepts – Ex ia, Ex ib, Ex ic and Ex nL
Exi components in Ex zone and unclassified area.
Exi verification and documentation
Exi installation and inspection


Legislation & references

- NEK 420
- NEK EN 60079-11
- NEK EN 60079-14
- NEK EN 60079-25

Course code: MTP-048
Course type: E-learning course
Duration: 2 hours
Language: Norwegian / English
Price: NOK 650,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-048-FT.

Course code: MTP-047
Course type: E-learning course
Duration: 2 hours 30 minutes
Language: Norwegian / English
Price: NOK 1150,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-047-FT.

Course code: TOS-001
Course type: Classroom course
Duration: 1 day
Language: Norwegian
Price: From NOK 9800,-

Only in Norwegian

Total Safety AS arrangerer spesialkurs for helsepersonell i offshoreindustrien. Kurset gir en grundig innføring i øyets fysiologi, anatomi og behandlingstiltak ved akutte øyeskader.

 

Kursinnhold

- Øyets normale anatomi

- Undersøkelsesmetoder ved skader og sykdommer i fremre øyeavsnitt

- Kontaktlinse problemer

- Bruddskader i øyehulen

- Bløtdelsskader utenfor/utenpå øyeeplet

- Bløtdelsskader på øyeeplet uten perforasjon

- Perforasjon av øyeeplet uten fremmedlegeme 

- Fremmedlegeme på / inne i øyet

- Øyeskader fremkalt av kjemikalier

- Brannskader i øyeregionen

- Strålingsskader

- Øyeplager ved bruk av dataskjerm

- Øyetrykket

- Førstehjelp ved øyeskader

- Skal pasienten sendes i land?

- Øyemedikamenter

- Aktuelle hjelpemidler

 

Kurset avholdes i Stavanger.

Course code: MTP-064-FT
Course type: E-learning course
Duration: Approx. 2 hours
Language: Norwegian
Price: NOK 650,-

For the moment this course is only in Norwegian, but an English language version will follow.

 

Dette kurset tilfredsstiller kravet satt i § 7 i Forskrift om sikkerhet ved arbeid i og drift av elektriske anlegg – FSE, til at relevant personell skal gis årlig opplæring og instruksjon innen FSE. Kurset inneholder også opplæring og instruksjon innen førstehjelp med fokus på strømskader, med unntak av hjerte-lungeredning (HLR) som du trenger praktisk øvelse i.

De forskjellige myndigheters regelverk trekker inn FSE som gjeldende for alle som jobber med strøm enten du jobber på skip, plattform, eller på land. Dette kurset passer for alle, uansett hvilken bransje du jobber i. 

Gjennom hele kurset fokuseres det på holdninger og den enkeltes ansvar til å følge regelverket. FSE- opplæring handler om å tilegne seg kunnskap om forskriften, og det er viktig å forstå hvorfor vi har dette regelverket. Å lykkes med å få den enkelte til å forstå viktigheten av å jobbe sikkert, er avgjørende for at elsikkerheten utvikler seg i riktig retning og at antall ulykker reduseres. 

Myndighetene krever at opplæring i FSE og førstehjelp ved ulykker forårsaket av elektrisk strøm gjennomføres minst en gang i året. Det skal ikke være mer enn 12 måneder mellom hver opplæring.

Denne fast track-versjonen av FSE kurset starter med en pre-test som sjekker deltakerens kunnskaper om FSE. Avhengig av resultatet fra pre-testen, vil deltakeren få et FSE kurs som er tilpasset kunnskapsnivået som blir avdekket i pre-testen. Kurs med fast track passer for alle, men er særlig egnet for de som skal repetere sin FSE-opplæring. Versjon uten fast track finner du i kurskatalogen med kursnavnet MTP-064 FSE lavspenning.

 

Course code: EBA-003
Course type: E-learning course
Duration: 50 minutes
Language: Polish
Price: NOK 450,-

The course is a management support and provides an introduction to Risk assessment, HSE regulations and Training requirements. The course is also helpful for everyone involved in the training of hazardous work equipment.
The course is intended to give participants an introduction to the HSE regulations, and requirements for training, especially relating to dangerous tools.

Course code: MUK-119
Course type: E-learning course
Duration: 1 hour
Language: English
Price: GBP 80,-

Course Goal: This course aims to give an overview of the purpose and use of Safety Data Sheets

 

Target Audience: All relevant personnel

 

Learning Objectives:

Section One: Introduction

LO1 Give an overview of what a Safety Data Sheet (SDS) is used for

LO2 Outline the responsibility of the manufacturer regarding an SDS

LO3 Explain when an SDS should be provided

LO4 Explain the duty of employers in relation to Safety Data Sheets

LO5 Give an overview of the Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 and the CLP Regulation

LO6 Explain the REACH Regulation

LO7 Give an overview of the Control of Substances Hazardous to Health (CoSHH) Regulations

LO8 Outline the role of an SDS in a risk assessment

Section Two: Safety Data Sheet Information

LO9 Recognise the layout of an SDS

LO10 Give an overview of the identification information contained in an SDS

LO11 Give an overview of the hazard identification information

LO12 Give an overview of the composition and data information

LO13 Give an overview of the first aid information

LO14 Give an overview of the fire-fighting information

LO15 Give an overview of the accidental release information

LO16 Give an overview of the storage and handling information

LO17 Give an overview of the exposure control information

LO18 Give an overview of the physical and chemical properties information

LO19 Give an overview of the stability and reactivity information

LO20 Give an overview of the toxicological information

LO21 Give an overview of the environmental information

LO22 Give an overview of the transport information

LO23 Give an overview of the regulatory information

LO24 Outline the supplementary information that may be present in an SDS

Course code: KIS-033
Course type: Classroom course
Duration: 8 hours
Language: Norwegian
Price: From NOK 2375,-

Varme arbeider innebærer økt brannrisiko. Brannene skyldes ofte menneskelig svikt, mangel på kunnskap og omtanke. Noen av brannene innebærer også tap av arbeidsplasser og av kulturhistoriske bygninger. De som utfører varme arbeider må forstå hvilken brannrisiko varme arbeider innebærer og utføre arbeidet slik at brann ikke oppstår. Derfor har forsikringsselskapene innført krav om sertifikat for de som skal utføre varme arbeider.

Sertifikat for varme arbeider har en gyldighet på 5 år.

Course code: MTP-049
Course type: E-learning course
Duration: 2 hours
Language: Norwegian / English
Price: NOK 650,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-049-FT.

Course code: MTP-049-FT
Course type: E-learning course
Duration: 2 hours
Language: Norwegian
Price: NOK 650,-

The fast track version starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers you give, you will get a course that is tailored to the level of knowledge that is revealed in the pre-test.

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

The course with fast track is suitable for for all, but is particularly practical for those who are going to do refresher training in FSE. The version without fast track is to be found in the course catalogue with the code MTP-049.

Course code: MTP-048-FT
Course type: E-learning course
Duration: 2 hours
Language: Norwegian / English
Price: NOK 650,-

The fast track version starts with a pre-test which checks the  participant's knowledge of FSE. Depending on the answers you give, you will get a course that is tailored to the level of knowledge that is revealed in the pre-test.

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

The course with fast track is suitable for for all, but is particularly practical for those who are going to do refresher training in FSE. The version without fast track is to be found in the course catalogue with the code MTP-048.

Course code: PRO-035
Course type: E-learning course
Duration: 4-6 hours
Language: Norwegian
Price: NOK 3000,-

Emergency regulations require the implementation of Risk And Vulnerability analysis (RAV-analysis) for the power supply. RAV-analysis is part of risk management in all businesses. In this course, we focus attention on how to carry out a particular type of RAV – namely a structured rough analysis, in practice. The course is linked to the Emergency Regulations requirements and is based on guidance and case histories in the RAV-analysis for the power supply (NVE & Proactima 2010). All examples used in this course are adapted to the power supply.

 

Course Content

• Introduction to risk management

• RAV-assessment into the risk management work

• How RAV-analysis can be used as a basis for decision

• Legislation impact on risk and vulnerability analysis in power supply

• What is meant by risk

• What is ment by vulnerability

• Rough analysis - theory and practical implementation

• How to get started with a RAV-analysis

• How to conduct risk assessments

• How to conduct vulnerability assessments

• How to present results

• Action and follow-up In the collection is RAV-analysis in a larger context, by focusing on the concepts of civil protection and risk management.

 

The collection contains speeches related to the themes covered in the e-learning course, and you will gain practical experience of participation in RAV-analyzes through case-work. Time to case work is limited, and if you want a more thorough knowledge of the role as process manager Proactima recommend that you participate in a two-day gathering. The second day has a greater focus on practical case work and the role of facilitator in a RAV-analysis.

Course code: APP-006
Course type: E-learning course
Duration: 3 hours
Language: Polish
Price: NOK 650,-

This e-learning course covers the requirements for training for those working in high voltage offshore.

 

Course code: LAN-004
Course type: Classroom course
Duration: 2 days
Language: Norwegian
Price: From NOK 4800,-

Kurset vil gi deltagerne kunnskap og praktiske ferdigheter om redning av personell i fallsikringsutstyr og personell som jobber i konstruksjoner, i høyden, tanker, trange rom samt trening i behandling av personer som er skadd i et slikt miljø. Kurset følger samarbeid for sikkerhet sin fagplan.

 

Kursinnhold:

- Lover og regler
- Risikoanalyse av planlagte fallsikringsjobber
- Utstyrskjennskap ( Tripod, tautaljer, fallblokk med vinsj etc)
- Hengetraume
- Belastningslære og farer ved redningsarbeid
- Fallredning (redning av forulykket personell i sele)
- Heising og firing av båre
- Redning fra tanker og trange rom
- Kontroll og vedlikehold av utstyr

Hits per page