Renewables

Course catalogue

hits
93
Course code: NI-020
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian / english
Price: NOK 400,-

The course covers the following topics:

- What is psychosocial working environment?
- Characteristics of good and poor psychosocial environment
- Roles and responsibilities
- Prevention

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Course code: PRO-013
Course type: Blended course
Duration: E-learning 4-6 hour ...
Language: Norwegian
Price: From NOK 8000,-

Emergency regulations require the implementation of Risk And Vulnerability analysis (RAV-analysis) for the power supply. RAV-analysis is part of risk management in all businesses. In this course, we focus attention on how to carry out a particular type of RAV – namely a structured rough analysis, in practice. The course is linked to the Emergency Regulations requirements and is based on guidance and case histories in the RAV-analysis for the power supply (NVE & Proactima 2010). All examples used in this course are adapted to the power supply.

 

Course Content

• Introduction to risk management

• RAV-assessment into the risk management work

• How RAV-analysis can be used as a basis for decision

• Legislation impact on risk and vulnerability analysis in power supply

• What is meant by risk

• What is ment by vulnerability

• Rough analysis - theory and practical implementation

• How to get started with a RAV-analysis

• How to conduct risk assessments

• How to conduct vulnerability assessments

• How to present results

• Action and follow-up In the collection is RAV-analysis in a larger context, by focusing on the concepts of civil protection and risk management.

 

The collection contains speeches related to the themes covered in the e-learning course, and you will gain practical experience of participation in RAV-analyzes through case-work. Time to case work is limited, and if you want a more thorough knowledge of the role as process manager Proactima recommend that you participate in a two-day gathering. The second day has a greater focus on practical case work and the role of facilitator in a RAV-analysis.

 

Target group

Persons involved in RAV-analysis and risk management in power supply.

 

Learning methods

Initial e-learning courses and a final in-house classroom collection (one or two days). Please contact us for a customized business services.

 

Course code: NI-022
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian / english
Price: NOK 400,-

The course covers the following topics:

- How to handle substance abuse
- Drug policies
- AKAN

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Course code: NI-011
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian / english
Price: NOK 400,-

The course covers the following topics:

- Which companies should have a Working Environment Committee (AMU)?
- How to organize the a Working Environment Committee (AMU)?
- What is a Working Environment Committee (AMU)?

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Course code: SAR-001
Course type: E-learning course
Duration: 15 minutes
Language: Norwegian
Price: NOK 600,-

The course is designed for people who already know how to declare on paper and who want to learn how it is done electronically.

Course code: MUK-008
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

 

Course content
- Outline the extent of the problem of slips, trips and falls at work
- Identify the causes of slips, trips and falls
- Identify the key pieces of legislation that are in place to reduce the risk of slips, trips and falls occurring
- Explain the duties of employers in preventing slips, trips and falls in the workplace
- Explain the hierarchy of controls in preventing, and reducing, the risk of slips
- Explain the actions that can be taken to prevent and reduce the risk of trips
- Explain the responsibilities of employees in preventing slips, trips and falls

Course code: MUK-007
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

This course aims to increase learners’ awareness of the risks of hand-arm vibration and the effects that it can cause. The course also looks at the control measures that should be taken to reduce exposure to vibration, based on industry best practice.

 

Course content

- Describe hand-arm vibration and the effects it can cause

- Explain what Hand Arm Vibration Syndrome (HAVS) is and how to identify its early symptoms

- Identify the types of jobs and equipment that are most likely to involve hand-arm vibration and expose workers to the risk of health effects

- Explain the duties of employers under the Control of Vibration at Work Regulations
- Outline the measures that employees can take to reduce the risk of HAVS
- Outline the duties of equipment manufacturers and suppliers in reducing vibration risks
- Describe the process of assessing the vibration risk to employees in accordance with the Exposure Action Value (EAV) and Exposure Limit Value (ELV)
- Describe the control measures that should be taken to reduce exposure to vibration
- Explain the importance of monitoring exposure to vibration, and health surveillance
- Explain the importance of information and training in reducing the risks to health from vibration

Course code: APP-002
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian
Price: NOK 500,-

The course is available in Norwegian only.

The course provides a brief overview of work safety in the explosive-hazard areas. The user learns how the explosive processes work, how to classify the hazardous substances and areas and receives some practical guidelines. The information is presented in audio lecture, accompanied by animations and photos.

Course Content
- Fire and explosion theory
- Zone classification
- Ex-protection in practice
Course code: PRO-006
Course type: E-learning course
Duration: 2-3 hours
Language: Norwegian
Price: NOK 1000,-

Induction course in HSE is designed so that participants will have the first necessary expertise to ensure safety challenges in their daily work. This occurs in part through increased awareness of what is valuable and should be prioritized. The course also draws attention to the main framework governing the HSE The course is designed in order to create interest and motivation to work with HSE in the workplace.

 

Course contents

The course is divided into three topics:

-Care! - To take care of each other

-Terms and conditions - Laws, regulations and rules

-The challenging life - how to work without going wrong

 

Participants will

-Be motivated to work with safety in the workplace.

-Understand the relationship between a good safety work and preventing loss of important values such as life, health and nature in balance.

-Get an introduction to the main control elements of the HSE 

-Get advice on how they can work safely under time pressure and stress situations

Course code: NI-015
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian / english
Price: NOK 400,-

The course covers the following topics:

- Agreement on Inclusive Working Conditions
- Working environment and prevention
- Absence

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Course code: APP-008
Course type: E-learning course
Duration: 3 hours
Language: Polish
Price: NOK 650,-

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations.

 

Course code: KIS-018
Course type: Classroom course
Duration: 8 hours
Language: Norwegian
Price: From NOK 3250,-

Fallulykker er i dag den nest største årsaken til arbeidsulykker med dødelig utgang, kun overgått av ulykker med motorkjøretøy.

Det kreves opplæring for å bruke fallsikringssystemer riktig. Arbeidsgiver har plikt til å gi slik opplæring iht. arbeidsmiljøloven. Mange ulykker resulterer i alvorlige skader på grunn av feil bruk av utstyret. Brukeren av utstyret mangler nødvendig opplæring og kjenner ikke til produsentenes begrensinger av utstyret. Dette kurs gir brukerne grundig opplæring i forskjellige fallsikringssystemer og de begrensinger som produsentene har satt. Dette er virkelig et kurs som flere burde gjennomført.

 

Kursinnhold
- Ulykker som har hendt
- Aktuelle forskrifter
- Fallsikringsseler, dempere, fallblokker, kroker med mer
- Klareringshøyde
- Glidesystemer
- Reguleringslåser
- Redning og evakuering
- Kontroll og vedlikehold
- Sikkerhetsregler for arbeid i høyden

Kurset avholdes i Bergen og Drammen, samt bedriftsinternt over hele landet.

Course code: PRO-006
Course type: E-learning course
Duration: 2-3 hours
Language: English
Price: NOK 1000,-

Induction course in HSE is designed so that participants will have the first necessary expertise to ensure safety challenges in their daily work. This occurs in part through increased awareness of what is valuable and should be prioritized. The course also draws attention to the main framework governing the HSE The course is designed in order to create interest and motivation to work with HSE in the workplace.

 

Course contents

The course is divided into three topics:

-Care! - To take care of each other

-Terms and conditions - Laws, regulations and rules

-The challenging life - how to work without going wrong

 

Participants will

-Be motivated to work with safety in the workplace.

-Understand the relationship between a good safety work and preventing loss of important values such as life, health and nature in balance.

-Get an introduction to the main control elements of the HSE 

-Get advice on how they can work safely under time pressure and stress situations

Course code: PRO-017
Course type: E-learning course
Duration: 4-6 hours
Language: Norwegian
Price: NOK 5000,-

Emergency regulations require the implementation of Risk And Vulnerability analysis (RAV-analysis) for the power supply. RAV-analysis is part of risk management in all businesses.

In this course, we focus attention on how to carry out a particular type of risk and vulnerability – namely a structured rough analysis, in practice. The course is linked to the Emergency Regulations requirements and is based on guidance and case histories in the RAV-analysis for the power supply (NVE & Proactima 2010). All examples used in this course are adapted to the power supply.

Course Content:
• Introduction to risk management in power supply
• Risk and vulnerability assessment into the risk management work
• How risk and vulnerability analysis can be used as a basis for decision
• Legislation impact on risk and vulnerability analysis in power supply
• What is meant by risk
• What is ment by vulnerability
• Rough analysis - theory and practical implementation
• How to get started with a RAV-analysis
• How to conduct risk assessments
• How to conduct vulnerability assessments
• How to present results
• Action and follow-up
• Examples of risk and vulnerability analysis in power supply with the use of coarse analysis

Target group:
Target audience is decision makers, project managers, line managers and project staff, who want a basic understanding of RAV-analysis methodology.

Learning methods:
E-learning course. Ability to build on the course with one or two days of collection. Contact Energi Akademiet for open sessions in this course; http://www.energinorge.no/oevrige/risiko-og-saarbarhetsanalyser-for-kraftforsyningen-article9020-258.html

Course code: MTP-065
Course type: E-learning course
Duration: Approx. 2 hours
Language: English, Norwegian
Price: NOK 650,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR). 

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.  

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about acquiring knowledge about the regulations, but it is equally important for the individual to understand why we have these regulations. It is crucial to succeed in getting the individual to understand the importance of working safely, so that the electrical safety develops in the right direction and that the number of accidents is reduced. 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the course name FSE High Voltage (fast track) and course code MTP-065-FT.

Course code: EBA-004
Course type: E-learning course
Duration: 1 hour 40 minutes
Language: Norwegian
Price: NOK 650,-

The course provides knowledge about the structure, operation, applications and usage, maintenance and monitoring of the appropriate tool. The training provides knowledge about the requirements for safe use and operation stipulated in regulations and instructions.

Along with a practical review of the tools, the course meets the requirements for documented training in hazardous work equipment in Regulations concerning the Performance of Work.

The course covers the following subjects:

- Introduction to general HSE
- Angle grinder
- Hammer drills, jackhammers and combihammers
- Powder actuated gun
- Nail gun
- Saws with blade (includes table saw, crosscut and miter Saw, circular saw, jigsaw and reciprocating saw)
- Chain saw

 

Course code: MUK-022
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

This course aim to provide learners with an understanding of the dangers of asbestos, and how the risk involved in working with asbestos can be mitigated.

 

Course Content
-Explain what asbestos is
-Describe the hazards of asbestos
-Describe the various types, properties and uses of asbestos
-Identify areas where asbestos may still be found and describe how to identify its presence
-Identify the risk reduction methods when working with asbestos
- Describe the general procedures to deal with an emergency involving the uncontrolled released of asbestos dust

Course code: AAK-006
Course type: E-learning course
Duration: 1 hour 5 minutes
Language: English, Norwegian
Price: NOK 1300,-

This course is aimed at people who want to refresh their competence in connection with how to select and use fall protection equipment.

Throughout the course the participants will actively select equipment and methods and thereby gain a better understanding of correct use of fall protection equipment.

The course gives, among other things, an introduction to key requirements for employers regarding the use of fall protection equipment. The course is therefore well suited for anyone with HSE responsibilities during planning or performing work at height.

 

Course Content

- Requirements for employers 

- Safety work and level of protection 

- Selecting methods 

- Selecting equipment 

- Correct use 

- Inspection and maintenance

Course code: LBO-001
Course type: Classroom course
Duration: 8 hours
Language: Norwegian
Price: From NOK 3000,-

The Course is according to the Curriculum from SfS og Guideline 113 from NOG The Course gives a good basic training inn Fall Protection and also includes basic Rescue training.

 

Course Content

- Laws, Regulations og Guidelines for Fall Protection.

- Risk Management

- Fall Energy and Force

- Anchorage

- Fall Protection Equipment

- Suspension Trauma

- Maintenance and Inspection og Fall Protection Equipment

Course code: PRO-020
Course type: Blended course
Duration: 8 hours e-learning ...
Language: Norwegian
Price: From NOK 7000,-

Enterprice risk management is about working with what is important for the business, The right priorities in a time of great challenges and limited resources. The purpose of enterprice risk management is to ensure the right balance between developing and creating value and to avoid accidents, injuries and losses.

After completing the course, participants will have a better understanding of Risk management and how your business can implement this in their business.

 

COURSE CONTENT
 Topics that are addressed in this course:

 • Risk management - conceptual clarification
 • Why enterprice risk management
 • How to structure risk management in business
 • How to tie the overall goals and strategies with enterprise risk
 • How to implement the risk management process
 • How to establish management structures, roles and responsibilities
 • What support systems can support enterprise risk
 • How to develop a culture that supports enterprise risk
 • How to learn, evaluate and improve overall risk management

 

COURSE DESCRIPTION
The course is based on "The supervisor in Enterprice risk management" developed by Proactima for Energy Norway. The course is conducted as "blended learning", and is divided into two main parts.

The theoretical part is carried out as individual e-learning. Part two of the course as a unity in which the central theoretical issues are discussed, and where participants work with case studies.

 

TARGET GROUP

Managers at various levels within the organization who work with risk management.

Hits per page