Renewables

Course catalogue

hits
84
Course code: MTP-055
Course type: E-learning course
Duration: 45 minutes
Language: Norwegian and english
Price: NOK 500,-

The course covers the government requirements on theoretical training for personnel who may undertake simple operational and maintenance tasks on the electrical system.

The course focuses on preventing accidents and to be aware of the dangers of working with electricity. 

The theoretical part of First Aid and instructions are covered, but it is necessary to undertake practical training both in First Aid and the work tasks covered by the instructions in relation to the electrical installation where you are to work.

Course code: PRO-010
Course type: E-learning course
Duration: 3-4 hours
Language: Norwegian
Price: NOK 2000,-

Since January  1st 2006 all employees shall, according to Arbeidsmiljølovens §3-5, complete training in HSE work. This means that all business leaders and managers with responsibility for personnel shall have knowledge of basic principles of systematic health, environment and safety work. This course covers the legal requirements for safety training for managers.


Your responsibility as an employer and manager:
It is documented positive relations between good working environment and profitable operations. After this course you will be better able to understand the safety significance of work for corporate and individual, and how you as a leader may work systematically to achieve good safety performance. The motivation for working with the HSE will be strengthened.


Course Content
The course is structured around the principles of continuous improvement:
1. Why should we work with the HSE? - Motivation
2. Where will we? - Structured Planning
3. How do we get there? - Perform
4. Do we know if we are on the right track? - Check
5. Do we change course? - Correct


You will also learn more about:
- Laws and regulations on safety
- Challenges in the health / environment, external environment and safety
- Various tools and instruments


The course can also be offered in combination with a classroom session. Contact us for a tailormade solution for your company.

Course code: MUK-021
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

Course Goal: This course aims to provide all personnel with solid hazard identification awareness to enable them to evaluate hazards quickly and effectively so that they can carry out their duties as safely as possible.

Learning Objectives

LO1 Explain the purpose of Hazard Identification

LO2 Give examples of common, industry specific hazards

LO3 Demonstrate effective hazard identification

LO4 Identify the difference between occupational hazards and Major Accident Hazards

LO5 Describe the hazards posed by people

LO6 Explain the importance of reducing risks to ALARP (As Low as Reasonably Practicable)

LO7 Give examples of control measures and recognise how these systems are used to mitigate risk

LO8 Explain the purpose of a Risk Assessment and how it can be used to identify and mitigate potential hazards

LO9 Give examples of Major Accidents Hazards and recognise why they occurred

Course code: MUK-007N
Course type: E-learning course
Duration: 45 minutes
Language: Norwegian
Price: NOK 500,-

This course aims to increase learners’ awareness of the risks of hand-arm vibration and the effects that it can cause. The course also looks at the control measures that should be taken to reduce exposure to vibration, based on industry best practice.

 

This course is designed to enable you to:

- Describe hand-arm vibration and the effects it can cause
- Explain the duties of employers, employees and equipment manufacturers in reducing exposure to vibration
- Describe the process of assessing the risk of exposure to vibration
- Outline the control measures that should be taken to reduce exposure to vibration

 

Course code: MUK-054
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

The course aims to increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practice for the correct handling techniques for safe lifting, and for the pushing and pulling of loads.

 

Course Content

-Define the term ‘manual handling’ and explain the importance of safe manual handling operations

-Identify the types of injuries that may result from manual handling operations

-Recognise the requirement to regulate manual handling operations

-Describe the duties that are placed on employers and employees

-Explain the importance of risk assessing manual handling operations

-Identify the factors to consider when assessing manual handling operations and identify ways of reducing the risks of injury

-Describe good handling techniques for safe lifting

-Describe good handling techniques for pushing and pulling loads

-Explain the training requirements associated with manual handling operations

Course code: MUK-009
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 500,-

This course aims to give offshore personnel the knowledge required to understand the hazards and controls associated with noise in the workplace.

 

Course Content
- Describe what noise-induced hearing loss is, and identify the early warning signs and symptoms to look out for
- Explain the workings of the human ear, how noise exposure causes damage, and the effects of such damage
- Explain the responsibilities and duties of employers and employees under current legislation
- Explain how noise is measured and identify the noise levels above which employers should take action to
reduce exposure
- Explain the risk assessment requirements
- Identify the control measures that should be taken to reduce exposure to noise
- Explain the requirements for hearing protection; how to use the different methods of hearing protection and the importance of maintaining hearing protection
- Describe the common roles involved in lifting operations
- Explain the importance of health surveillance

Course code: APP-001
Course type: E-learning course
Duration: 7 hours
Language: English
Price: NOK 4200,-

This course looks at electrical installations in explosive atmospheres. The object of the course is to enable those working in explosive atmospheres to perform their work properly and safely.

 

This course fulfils the requirements for personnel working in explosive atmospheres. Theory is taken from CENELEC and IEC norms.

 

Text, images, videos, animations and 3D simulations will help give you a better understanding of explosive atmospheres and their particular characteristics.

Course code: NI-012
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian / English
Price: NOK 400,-

The course covers the following topics:

- Act and Regulations
- Purpose
- Responsibility
- Participants and roles
- Internal control regulations

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Course code: MUK-033
Course type: E-learning course
Duration: 20 minutes
Language: English
Price: NOK 500,-

This course aims to provide learners with an awareness of mercury and provide best practice for working with mercury in oil and gas producing facilities.

 

Course Content

- Define mercury, identify the forms that it can take and where it can be found

- Identify recommended mercury exposure limits

- Describe the hazards associated with mercury

- Describe the effects of mercury contamination

- Give examples of control measures that can be used to limit workplace exposure

Course code: EBA-001
Course type: E-learning course
Duration: 50 minutes
Language: Norwegian
Price: NOK 450,-

The course is a management support and provides an introduction to Risk assessment, HSE regulations and Training requirements. The course is also helpful for everyone involved in the training of hazardous work equipment.
The course is intended to give participants an introduction to the HSE regulations, and requirements for training, especially relating to dangerous tools.

Course code: PRO-015
Course type: E-learning course
Duration: 10-15 hours
Language: English
Price: NOK 4000,-

This course provides a solid theoretical foundation within the HSE. But the focus is always how work safety, health and the environment are planned and carried out in practice.

 

After completing the module, participants will be better able to understand the safety significance of work for society, business and individuals. At the same time the motivation to work with HSE to be strengthened. This is done through learning and reflection on important topics such as:

- HSE concepts

- Key principles of management and HSE

- Measures and models for HSE

 

Course content:

- Introduction to Safety Management - Regulation of health, safety and security

- Internal control and management philosophy - Duties and rights

- HSE management - vision, strategy and goals

- Culture - Behaviour

- Health and environment - Environmental

- Safety - The risk management process and risk analysis

- Preparedness - Monitoring of adverse events

Course code: PRO-013
Course type: Blended course
Duration: E-learning 4-6 hour ...
Language: Norwegian
Price: From NOK 8000,-

Emergency regulations require the implementation of Risk And Vulnerability analysis (RAV-analysis) for the power supply. RAV-analysis is part of risk management in all businesses. In this course, we focus attention on how to carry out a particular type of RAV – namely a structured rough analysis, in practice. The course is linked to the Emergency Regulations requirements and is based on guidance and case histories in the RAV-analysis for the power supply (NVE & Proactima 2010). All examples used in this course are adapted to the power supply.

 

Course Content

• Introduction to risk management

• RAV-assessment into the risk management work

• How RAV-analysis can be used as a basis for decision

• Legislation impact on risk and vulnerability analysis in power supply

• What is meant by risk

• What is ment by vulnerability

• Rough analysis - theory and practical implementation

• How to get started with a RAV-analysis

• How to conduct risk assessments

• How to conduct vulnerability assessments

• How to present results

• Action and follow-up In the collection is RAV-analysis in a larger context, by focusing on the concepts of civil protection and risk management.

 

The collection contains speeches related to the themes covered in the e-learning course, and you will gain practical experience of participation in RAV-analyzes through case-work. Time to case work is limited, and if you want a more thorough knowledge of the role as process manager Proactima recommend that you participate in a two-day gathering. The second day has a greater focus on practical case work and the role of facilitator in a RAV-analysis.

 

Target group

Persons involved in RAV-analysis and risk management in power supply.

 

Learning methods

Initial e-learning courses and a final in-house classroom collection (one or two days). Please contact us for a customized business services.

 

Course code: SAR-001
Course type: E-learning course
Duration: 15 minutes
Language: Norwegian
Price: NOK 600,-

The course is designed for people who already know how to declare on paper and who want to learn how it is done electronically.

Course code: NI-026
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian / English
Price: NOK 400,-

The course covers the following topics:

- Duties for safety representatives
- Tools
- Safety inspections
- Management and support

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Course code: NI-020
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian / english
Price: NOK 400,-

The course covers the following topics:

- What is psychosocial working environment?
- Characteristics of good and poor psychosocial environment
- Roles and responsibilities
- Prevention

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Course code: PRO-006
Course type: E-learning course
Duration: 2-3 hours
Language: Norwegian
Price: NOK 1000,-

Induction course in HSE is designed so that participants will have the first necessary expertise to ensure safety challenges in their daily work. This occurs in part through increased awareness of what is valuable and should be prioritized. The course also draws attention to the main framework governing the HSE The course is designed in order to create interest and motivation to work with HSE in the workplace.

 

Course contents

The course is divided into three topics:

-Care! - To take care of each other

-Terms and conditions - Laws, regulations and rules

-The challenging life - how to work without going wrong

 

Participants will

-Be motivated to work with safety in the workplace.

-Understand the relationship between a good safety work and preventing loss of important values such as life, health and nature in balance.

-Get an introduction to the main control elements of the HSE 

-Get advice on how they can work safely under time pressure and stress situations

Course code: NI-011
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian / english
Price: NOK 400,-

The course covers the following topics:

- Which companies should have a Working Environment Committee (AMU)?
- How to organize the a Working Environment Committee (AMU)?
- What is a Working Environment Committee (AMU)?

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Course code: NI-022
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian / english
Price: NOK 400,-

The course covers the following topics:

- How to handle substance abuse
- Drug policies
- AKAN

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Course code: MTP-024
Course type: E-learning course
Duration: 1 hour
Language: Norwegian
Price: NOK 500,-

This course provides an introduction to emergency first aid. After completing the course, users will feel secure enough in their knowledge to be able to take action in an accident situation by analyzing the situation and understanding the order in which to do what needs to be done.

 

Course Content

- Introduction

- Lifesaving first aid
- To call for help
- The important survey
- Stroke
- Cardiac Resuscitation
- Heart Disease
- Internal and external bleeding

Course code: APP-008
Course type: E-learning course
Duration: 3 hours
Language: Polish
Price: NOK 650,-

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations.

 

Hits per page