Kurskatalog

Who is this course for?

Trainee Oil and Gas Operations Technicians

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of fuel systems

How will this course benefit my company?

By ensuring you have an overview of fuel systems

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
All well intervention personnel working with tools where explosives are an integrated part of the operation

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to give learners an introduction to explosives used in well intervention operations

How will this course benefit my company?
By ensuring you have an introduction to explosives used in well intervention operations

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Dette kurset er kun tilgjengelig engelsk.

Hensikten med kurset er å gi en oversikt over hvordan utslipp av hydrokarboner styres.

Etter fullført kurs skal brukeren kunne:
- Utviklingen av styring av hydrokarbonlekkasjer for å redusere risiko
- Instrumenterte sikkerhetssystemer
- Innføring av arbeidstillatelsessystemet
- Barrierer og isolasjonsprosedyrer
- Brann- og gassdeteksjonssystemer
- Rapportering av hydrokarbonlekkasjer
- Egenskaper og faseendring av hydrokarboner
- Farene ved eksponering for hydrogensulfid (H2S) og symptomer på H2S-forgiftning
- Omfanget av lekkasjerater som kan oppstå

Kurset er kun tilgjengelig på engelsk. 

Hensikten med kurset er å gi en introduksjon til hydrauliske systemer innen olje- og gassindustrien.

Etter fullført kurs skal brukeren kunne:
- Gi en oversikt over grunnleggende hydrauliske systemer
- Hydrauliske systemer som vanligvis brukes i olje- og gassindustrien
- Funksjon av hydrauliske systemer
- Potensielle farer forbundet med hydrauliske systemer
- Hvordan reduserer farer knyttet til bruk av hydrauliske systemer

Kurset er kun tilgjengelig på engelsk. 

Who is this course for?

All personnel who work with or on board Floating Production Storage and Offloading units (FPSOs).

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of industry best practice for FPSO vessel operations.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an overview of industry best practice for FPSO vessel operations.

What standards are referred to in this course?

• International Convention for the Safety of Life at Sea (SOLAS)

• Port State Authority/Flag State

• International Maritime Organization (IMO)

• International Association of Classification Societies (IACS)

• American Bureau of Shipping (ABS)

• China Classification Society (CCS)

• Det Norske Veritas (DNV)

• Germanischer Lloyd (GL)

• Korean Register of Shipping (KR)

• Lloyd’s Register (LR)

• Nippon Kaiji Kyokai (ClassNK) (NK)

• Registro Italiano Navale (RINA)

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Who is this course for?

Personnel who require a basic understanding of the operation of diesel engines and the importance of maintaining good lubrication for their safe operation.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an overview of how diesel engines operate, their components and their use within the industry. It will also outline the importance of maintaining good lubrication for their safe operation.

How will this course benefit my company?

This course will provide personnel with an overview of how diesel engines operate and the importance of maintaining good lubrication for their safe operation.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims to provide learners with an overview of gas liquids and their chemical and physical properties. 

Learning Objectives:

Section 1: An Overview of Gas Liquids

Section 2: Chemical and Physical Properties of Gas Liquids

Section 3: Liquefied Petroleum Gas

Section 4: Natural Gas Liquids (NGL) Recovery

Section 5: Removal of Natural Gas Impurities

Section 6: Liquefaction of Natural Gas

Section 7: Shore-Based Storage of Gas Liquids

Section 8: Transportation of Liquefied Natural Gas

Section 9: Health, Safety and Environmental (HSE) Issues of Gas Liquids

Kurset er kun tilgjengelig på engelsk. 

Dette kurset er kun tilgjengelig engelsk.

Who is this course for?
Process Operators and Lab Technicians

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an overview of the various types of process chemicals, their use and how they work.

Section 1: Basic Introduction to Chemistry
Section 2: Process Chemicals in the Oil and Gas Industry
Section 3: Identifying the Risks in the Use of Process Chemicals
Section 4: Managing Chemical usage

How will this course benefit my company?
By ensuring you have an overview of the various types of process chemicals, their use and how they work.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This course is aimed at all personnel involved in operations involving the use of seals, particularly those who are expected to undertake related duties in the workplace.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of the role and application of seals and gaskets

How will this course benefit my company?

To ensure you have an overview of the role and application of seals and gaskets

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Kurset er kun tilgjengelig på engelsk.  

Who is this course for?

Personnel who require knowledge or awareness of systems and equipment used for hydrocarbon processing.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide personnel with a broad overview of compressors, safety and controls systems, prime movers and ancillary systems.

How will this course benefit my company?

By ensuring you have an overview of common hydrocarbon processing systems and equipment and their associated hazards and controls.

What standards are referred to in this course?

There are no specific regulations referenced. The course is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hensikten med kurset er å introdusere kravene som gjelder til vedlikehold av overflatebehandling.

Etter fullført kurs skal brukeren kunne:
- Hva som menes med overflatebehandling
- Krav til overflatebehandling
- Mulige konsekvensene av å fjerne rust fra korrodert utstyr
- Ulike metoder for overflatebehandling
- Ulike teknikker for inspeksjon
- Tiltak som bør vurderes ved utførelse av overflatebehandling

Kurset er kun tilgjengelig på engelsk. 

Who is this course for?

Personnel requiring an awareness or understanding of the common safety methods when using scaffolding over the sea.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to give an overview of requirements for safe scaffolding operations over sea.

How will this course benefit my company?

By ensuring you have an overview of the requirements for the safe use of scaffolding over the sea.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Kurset er kun tilgjengelig på engelsk. 

Who is this course for?

Trainee Refinery Technicians

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of safe furnace operations

How will this course benefit my company?

By ensuring you have an overview of safe furnace operations 

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Kurset er kun tilgjengelig på engelsk.  

This course aims to give personnel the knowledge required to understand the hazards and controls associated with noise in the workplace.

Kursinnhold

LO1 Describe what noise-induced hearing loss is, and identify the early warning signs and symptoms to look out for

LO2 Explain the workings of the human ear, how noise exposure causes damage, and the effects of such damage

LO3 Explain the responsibilities and duties of employers and employees under current legislation

LO4 Explain how noise is measured and identify the noise levels above which employers should take action to reduce exposure

LO5 Explain the risk assessment requirements

LO6 Identify the control measures that should be taken to reduce exposure to noise

LO7 Explain the requirements for hearing protection; how to use the different methods of hearing protection and the importance of maintaining hearing protection

LO8 Explain the importance of healthsurveillance

Hensikten med kurset er å forklare viktigheten av korrekt bejening av smøresystemer for å holde mekanisk utstyr i drift.

Etter fullført kurs skal brukeren kunne:
- Hensikten med smøresystemer
- Vanlige smøresystemer
- Hvordan betjene et typisk smøresystem

Kurset er kun tilgjengelig på engelsk. 

Who is the course for?

Personnel who require an overview of the steps involved in the process of disconnecting flowlines.

Is previous experience required?

You do not require previous experience to complete this course.

How will the course benefit me?

By providing you with an overview of the steps involved in the process and disconnecting flowlines and the associated safety controls.

How will the course benefit my company?

By ensuring personnel are aware of the hazards posed by disconnecting flowlines and the steps that should be followed to ensure that the work is carried out safely.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hensikten med kurset er å gi en oversikt over bransjens beste praksis i forhold til sikker bruk av slipeutstyr.

Etter fullført kurs skal brukeren kunne:
- Vanlige aktiviteter i olje- og gassindustrien som innebærer bruk av slipeutstyr
- Krav til bærbare og håndholdte slipemaskiner
- Potensielle farer forbundet med bruk av slipeutstyr
- Krav til personlig verneutstyr ved bruk av slipeutstyr
- Viktigheten av å bruke vakter under slike aktiviteter
- Nødvendige sikkerhetstiltak og kompenserende tiltak for å redusere risiko

Kurset er kun tilgjengelig på engelsk. 

Hensikten med kurset er å gi en oversikt over subsea kontrollsystemer.

Etter fullført kurs skal brukeren kunne:

- Utviklingen av subsea olje- og gassbrønnkomplettering
- Utformingen av havbunnsbrønner
- Subsea umbilical
- Operasjon av aktuerte subseaventiler
- Overvåkning av ventilposisjon subsea
- Styring av modulerte subseaventiler
- Subsea flytkontroll
- Subsea trykkontroll
- Overvåkning av temperatur
- Overvåkning av sand
- Overvåkning av korrosjon
- Subsea nødavstengingssystemer
- Utviklingen av undervannsteknologi

Kurset er kun tilgjengelig på engelsk.

Who is this course for?

Trainee Production Operators and Trainee Instrument Technicians

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of process control systems

This course has 7 sections:

Section 1: Open and Closed Loops

Section 2: Process Control Hardware

Section 3: Process Control Lag

Section 4: Control Modes

Section 5: Fault Finding Techniques

Section 6: Distributed Control Systems

Section 7: SIS and Cause and Effects

How will this course benefit my company?

To ensure you have an overview of process control systems

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hensikten med kurset er å introdusere prinsippene for turboekspansjon.

Etter fullført kurs skal brukeren kunne:
- Fordelene med bruk av turboekspanderen
- Drift av turboekspandere
- Hvor brukes turboekspandere
- Prinsippene for turboekspansjon
- Eksempler på ulike typer turboekspandere
- Relevante operasjonelle hensyn

Kurset er kun tilgjengelig på engelsk.