Kurskatalog

FAST TRACK lar brukeren først ta en pre-test for å kartlegge sine eksisterende kunnskaper innen temaet. Basert på resultatene fra pre-testen vil FAST TRACK deretter automatisk opprette et skreddersydd kurs som er tilpasset kunnskapsnivået som blir avdekket i pre-testen.

Hensikten med kurset er å øke bevisstheten rundt betydningen av trygge operasjoner og farene forbundet med manuell håndtering. Kurset går også gjennom  beste praksis for å ivareta sikker løfting og for forflytting av last (skyve/trekke).

Etter fullført kurs skal brukeren kunne:
- Definere begrepet manuell håndtering og forklare betydningen av at slike operasjoner utføres trygt
- Vite hvilke typer skader som kan oppstå i forbindelse med manuell håndtering
- Kjenne til relevant lovgivningen
- Beskrive arbeidsgiver og arbeidstakers plikter i følge relevant regelverk
- Forklare viktigheten av risikovurdering i forbindelse med manuell håndtering
- Vite hva man bør vurdere for å redusere risikoen for skade
- Beskrive gode håndteringsteknikker for sikker løfting og viktigheten av å arbeide innenfor HMS-regelverket
- Beskriv gode håndteringsteknikker for å skyve og trekke laster
- Forklare opplæringskravene som gjelder i forbindelse med slike operasjoner

Kurset er kun tilgjengelig på engelsk.  

Who is this course for?

Personnel who require awareness and understanding of the hazards and controls of common compressed air uses.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

How will this course benefit my company?

By ensuring you are introducted  to safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hensikten med kurset er å øke kunnskaper om temaet «Gasskompresjon».

Kursinnhold:
- Introduksjon til gasskompresjon
- Gasskompresjonssystemer
- Gasskompressor, prinsipper
- Gasskompressor, komponenter
- Surgekontroll
- Oppstart og nedstengning
- Innovasjon

Kurset er kun tilgjengelig på engelsk. 

Who is this course for?

For all personnel who are involved in working with gas turbines.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an introduction to gas turbines and how they are designed and operated.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of gas turbines and how they are designed and operated.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hensikten med kurset er å gi en oversikt over farer som er forbundet med bruk av bærbare håndverktøy og tiltak man kan iverksette for å redusere risikoen for skader.

Etter fullført kurs skal brukeren kunne:
- Eksempler på ulike typer bærbare håndverktøy som brukes i olje- og gassindustrien
- Skadepotensialet ved bruk av bærbare håndverktøy
- Krav som gjelder ved bruk av håndverktøy
- Hvordan man kan redusere risikoen ved regelmessig bruk av håndverktøy
- Personlig verneutstyr, inkludert passende håndbeskyttelse

Kurset er kun tilgjengelig på engelsk. 

Course Goal: This course aims to provide learners with an introduction to the principles of the systems associated with oil and gas processing operations.  

Section 1: An Introduction to Oil Treatment

LO1 Explain the theory behind the process of separation in the Oil and Gas Industry 

LO2 Identify the most common types of separator 

LO3 Identify the requirements for a test separator and explain how they are used to monitor individual well production

LO4 Give an overview of main oil line pumps and explain how they are deployed

Section 2: An Introduction to Gas Compression and Hydrate Prevention

LO5 Give an overview of the process of gas compression

LO6 Describe the different methods of chemical injection used for hydrate prevention (during gas export)

Section 3: An Introduction to Utility Systems

LO7 Identify the different utility systems in use in the Oil and Gas Industry 

LO8 Describe the use of sea water lift pumps and water polishing systems 

LO9 Describe the purpose of cooling systems and heat exchangers 

LO10 Describe the use of heat medium systems 

LO11 Describe the use of potable water systems 

LO12 Describe the use of diesel storage systems for the bunkering, storage and distribution of diesel

Dette kurset er kun tilgjengelig på engelsk.

Who is this course for?

All personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide learners with the knowledge of how to assess when it is safe to tackle a fire, information on different types of extinguisher, and an overview of how to operate a fire extinguisher safely

How will this course benefit my company?

To ensure you have the knowledge of how to assess when it is safe to tackle a fire, information on different types of extinguisher, and an overview of how to operate a fire extinguisher safely 

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Kurset er kun tilgjengelig på engelsk. 

Hensikten med kurset er å gi en oversikt over fakkel systemet.

Etter fullført kurs skal brukeren kunne:
- Formålet med fakling
- Kildene til fakling
- Viktigheten av å redusere fakling
- De miljømessige konsekvensene knyttet til fakling
- Nødsituasjoner med fakling
- Hvordan giftige gasser kan påvirkes av fakling
- Design og drift av fakkelsystemet
- Flare drums
- Utforming av fakkeltipp
- Oppstart av fakkelsystemer

Kurset er kun tilgjengelig på engelsk. 

Hensikten med kurset er å gjøre personell i stand til å gi førstehjelp til en skade som inntreffer på arbeidsplassen eller et akutt tilfelle av alvorlig sykdom inntil kvalifisert medisinsk assistanse ankommer.

Etter fullført kurs skal brukeren kunne:
- Gjennomføre vurdering av skade
- Utføre hjerte-lungeredning (HLR)
- Utføre hjertekompresjoner på en voksen
- Utføre munn-til-munn
- Legge person i stabilt sideleie
- Behandle blødende skader
- Vite hva du skal gjøre i tilfelle mistanke om skjelettskader
- Vite hva du skal gjøre i tilfelle mistanke om ryggskade
- Vite hva du skal gjøre i tilfelle anafylaktisk sjokk
- Tiltak ved sjokk
- Tiltak ved kvelning
- Vite hvordan behandle øyeskade
- Vite hvordan behandle forgifning
- Vite hvordan behandle brannskader og forbrenninger
- Vite hva du skal gjøre ved mistanke om hjerteinfarkt
- Innholdet i et vanlig førstehjelpsskrin

Kurset er kun tilgjengelig på engelsk. 

Course Goal: This course aims to provide an overview of upstream oil and gas operations

Who is the course for?

Newcomers to the oil and gas industry

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Learning Objectives:

• LO1 Describe how hydrocarbon reservoirs are formed

• LO2 Describe the reservoir appraisal process

• LO3 Identify the configuration of a production Christmas tree   

• LO4 Describe a subsea Christmas tree

• LO5 Describe the function of the choke valve

• LO6 Describe the separation process

• LO7 Describe the test separator

• LO8 Identify the associated gas clean-up process

• LO9 Describe the absorption process

• LO10 Describe the adsorption process

• LO11 Describe the gas compression process

• LO12 Identify the produced water disposal process

• LO13 Describe the crude oil treatment process

• LO14 Describe the crude oil metering process

• LO15 Describe the gas metering process

• LO16 Describe process control

• LO17 Identify enhanced oil recovery methods

Kurset er kun tilgjengelig på engelsk. 

Dette kurset er kun tilgjengelig engelsk.

Who is this course for?
Newcomers to the Oil and Gas Industry

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide a brief overview of fire and safety systems

How will this course benefit my company?
By ensuring you have a brief overview of fire and safety systems.

What standards are referred to in this course?
Health and Safety at Work Act
The Management of Health and Safety at Work Regulations
The Regulatory Reform (Fire Safety) Order
The Fire (Scotland) Act

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hensikten med kurset er å forklare beste praksis i forhold til gjeldende miljøkrav og hvordan disse skal etterleves på offshoreinstallasjoner på britisk sokkel (UKCS).

Etter fullført kurs skal brukeren kunne:
- De viktigste miljøspørsmål knyttet til olje- og gassindustrien
- Gjeldende miljøkrav for offshore olje- og gassinstallasjoner
- «Department of Energy and Climate Change (DECC)» sin rolle
- «Offshore Environmental Inspectorate Team (OEIT)» sin rolle
- «Scottish Environment Protection Agency (SEPA)» sin rolle
- Konsekvensutredningsforskriftene
- Verneforskriftene
- ISO14001 og miljøstyring
- Potensielle skadevirkninger knyttet til offshore aktiviteter
- Hvordan atmosfæriske utslipp er regulert
- Hvordan oljeholdige utslipp er regulert
- Hvordan kjemiske utslipp er regulert
- Hvordan utslipp er regulert
- Hvordan EU Offshore sikkerhetsdirektivet har påvirket regelverkets krav til miljøsamsvar
- Hvordan olje- og gassindustrien forbedre innsatsen for miljøet

Kurset er kun tilgjengelig på engelsk. 

Hensikten med kurset er å øke kunnskaper om temaet «Olje- og gassmåling, prøvetaking og pigging».

Kursinnhold:
- Introduksjon til måling
- Gassmålingsprinsipper
- Gåssmåling
- Oljemåling
- Måleoperasjoner
- Prøvetakingssystemet
- Pigging

Kurset er kun tilgjengelig på engelsk. 

Hensikten med kurset er å gi en oversikt over de sikkerhetsregler som må tas når du arbeider med elektrisk utstyr.

Etter fullført kurs skal brukeren kunne:
- Betydningen av elektriske sikkerhetsregler
- Lover og regler for å forebygge skader fra elektrisitet på arbeidsplassen
- Felles terminologi for elsikkerhet
- Generelle forholdsregler og sikkerhetsprosedyrer som skal følges når du jobber med elektrisk utstyr
- Valg av riktig personlig verneutstyr som skal brukes til spesifikke elektriske oppgaver
- Iverksette tiltak i tilfelle en nødssituasjon

Kurset er kun tilgjengelig på engelsk. 

Who is this course for?

Personnel who work with pumps in the Oil & Gas industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an overview of the various types of pumps used in the Oil and Gas Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel who work with pumps have an overview of each type and how they work.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of common handling and storage methods for chemicals.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the requirements for the handling and storage of hazardous substances

How will this course benefit my company?

By ensuring you have an overview of the requirements for the handling and storage of hazardous substances

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Kurset er kun tilgjengelig på engelsk. 

Kurset er kun tilgjengelig på engelsk.


Course Goal: This course aims toprovide learners with an overview of industry best practice associated with pressure vessel inspection

Learning Objectives:

LO1 Define what is meant by a ‘pressure vessel’

LO2 Give examples of pressure vessels

LO3 Identify the factors that can cause pressure vessel incidents

LO4 Identify the hazards posed by pressure vessel failure

LO5 Explain the requirements for inspections to be carried out by a competent person

LO6 Explain the requirements for a written scheme of examination

LO7 Describe how to carry out internal and external pressure vessel inspection

LO8 Describe how to carry out pressure pipework inspection

LO9 Explain the importance of carrying out regular pressure testing

LO10 Describe the control measures that are required to limit the risk posed by pressure vessels

Who is this course for?

Oil and Gas Operations Technicians

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of coiled tubing equipment and its operation

How will this course benefit my company?

To ensure you have an overview of coiled tubing equipment and its operation

What standards are referred to in this course?

This course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require an awareness and understanding of methods of oil and gas recovery.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to oil and gas recovery methods

How will this course benefit my company?

By ensuring you are introduced to the various ways oil and gas are recovered from the well.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

This course contains nine modules:

Module 1: Introduction to Water Injection

Module 2: Reservoirs and Rock Properties

Module 3: Waterflooding

Module 4: Injection Water Impurities

Module 5: Water Treatment

Module 6: Water Injection Systems

Module 7: Water Quality Monitoring

Module 8: Well Design and Construction

Module 9: Operation of the Water Injection System

Kurset er kun tilgjengelig på engelsk.