Kurskatalog

Dette kurset er kun tilgjengelig engelsk.

Who is this course for?
Any members of management, supervisor and shipboard management responsible for Ballast Water.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
The primary goal of this course are awareness and knowledge of Ballast Water Management in accordance with the International Convention for the Control and Management of Ships' Ballast Water and Sediments, referred to as the BWM Convention.

How will this course benefit my company?
By ensuring you are familiar with the best practices related to Ballast Water Management.

What standards are referred to in this course?
In compliance with IMOs Ballast Water Management Convention (BWMC) 2004 and industry best practice, and complying with US trade and US Coast Guard.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course Goal: This course aims to provide an understanding of the duties and responsibility of a Ship Safety Officer and should be able to undertake the duties as a Ship’s Safety Officer or Safety Representative.

Who is the course for?

Any personnel taking on the duties of a Ship Safety Officer or Safety Representative including Ship Officers / HQSE Managers / Training Managers, and Engine and Deck Department Supervisors.

Is previous experience required?

Those eligible to perform duties as “Ship Safety Officer” or a “Safety Representative”, are limited to crew members who have no less than 2 years consecutive sea service since attaining the age of 18, which in the case of a safety representative on board a tanker shall include at least 6 months service on such a ship.

How will the course benefit me?

After successfully completing this course, and have the “Safety Officer – Checklist” completed and approved, you should be able to undertake the duties and responsibilities as Safety Officer, as defined in STCW Code 2010 Table A-II/2 and A-III/2. You will be a certified Safety Officer.

How will the course benefit my company?

Ensuring you are qualified and certified as a “Safety Officer”.

What standards are referenced in the course?

• MCA Code of Safe Working Practices for Merchant Seamen

• This Safety Officer course also covers relevant parts of STCW Code Tables A-II/2 and A-III/2 

• IMO Model Course 3.11.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Basic knowledge of ISPS rules and regulations applicable to international ports and harbours.

The course objective is to raise awareness of possible threats to international ports and harbours. Completed course normally gives access to ISPS-areas on harbours.

Course Content
Introduction
Regulations
Roles and responsibilities
Threats
Security levels and measures

Kurset er godkjent av Sjøfartsdirektoratet.

Dette kurset er kombinert trening som består av:
- Et e-læringskurs
- Om bord-trening. Denne treningen består av en rekke øvelser og kan ta et par uker å fullføre. Når alle elementene i sjekklisten er gjennomført, er opplæringen fullført.

Gjennomføring av kurset krever at du er ansatt i et selskap som har en plan for ombordtrening av denne type aktiviteter. Kontakt Mintra for å få informasjon om hvordan du gjennomfører denne type trening.

Kurset blir ikke godkjent for privatpersoner uten tilknytning til et selskap.

Who is this course for?

This HSE Introduction course is for all personnel who require an introduction to or awareness of HSE roles, responsibilities and duties in Norway.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

Health, safety and environment (HSE) considerations are vital to every organisation. Moreover, HSE requirements in the workplace are laid down in a range of laws, regulations and guidelines.

The employer has the primary responsibility for providing a suitable, safe working environment – and for ensuring sufficient training. This course aims to provide you with the baseline knowledge to be able to manage HSE challenges in your daily work.

How will this course benefit my company?

By ensuring you have sufficient knowledge of relevant HSE requirements, laws, regulations, guidelines and best practice.

What standards are referred to in this course?

NA

Is there an assessment?

Yes

Dette kurset tilfredsstiller kravet satt i § 7 i Forskrift om sikkerhet ved arbeid i og drift av elektriske anlegg – FSE, til at relevant personell skal gis årlig opplæring og instruksjon innen FSE. Kurset innholder all førstehjelpsteori med fokus på strømskader som regelverket tilsier. Kurset inneholder også opplæring og instruksjon innen førstehjelp med fokus på strømskader, med unntak av hjerte-lungeredning (HLR) som du trenger praktisk øvelse i.

De forskjellige myndigheters regelverk trekker inn FSE som gjeldende for alle som jobber med strøm enten du jobber på skip, plattform, eller på land. Dette kurset passer for alle, uansett hvilken bransje du jobber i. 

Gjennom hele kurset fokuseres det på holdninger og den enkeltes ansvar til å følge regelverket. FSE-opplæring handler om å tilegne seg kunnskap om forskriften, og det er viktig å forstå hvorfor vi har dette regelverket. Å lykkes med å få den enkelte til å forstå viktigheten av å jobbe sikkert, er avgjørende for at elsikkerheten utvikler seg i riktig retning og at antall ulykker reduseres. 

Myndighetene krever at opplæring i FSE og førstehjelp ved ulykker forårsaket av elektrisk strøm gjennomføres minst en gang i året. Det skal ikke være mer enn 12 måneder mellom hver opplæring.

Denne fast track-versjonen av FSE-kurset starter med en pre-test som sjekker deltakerens kunnskaper om FSE. Avhengig av resultatet fra pre-testen, vil deltakeren få et FSE-kurs som er tilpasset kunnskapsnivået som blir avdekket i pre-testen. Kurs med fast track passer for alle, men er særlig egnet for de som skal repetere sin FSE-opplæring.

Versjon uten fast track finner du i kurskatalogen med kursnavnet MTP-064 FSE lavspenning.

Who is this course for?

Ship Officers

Is previous experience required?

Documented 12 months seaservice as an officer onboard an ISPS vessel. 

How will this course benefit me?

After successfully completing this course, you should be able to undertake the duties and responsibilities of a Ship Security Officer, as defined in section A/12.2 of the ISPS Code and in section A-VI/5 of the STCW Code. The course enables you to maintain and supervise the implementation of the Ship Security Plan, evaluate the security risk, threat and vulnerability, make regular inspections to ensure that appropriate safeguards are implemented and maintained, and ensure that the security systems are operated, tested and calibrated correctly.

How will this course benefit my company?

By ensuring you are qualified and certified as a Ship Security Officer (SSO).

What standards are referred to in this course?

STCW A-VI/5 and ISPS code section A/12.2.

The course is approved by the Norwegian maritime Authority. Approved certificate as Ship Security Officer will be issued upon course completion.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%. 

This course is a combined training consisting of: Elearning and onboard training (exercises and checklists).

To complete the course, it is required that you are employed by a company which has a plan for onboard training with these kind of activities.

The course will not be approved for any persons without a connection to a company as described above.

Who is this course for:
This course is designed for electrical personnel in various industries, including electricians, maintenance workers, facility managers, engineers, and safety professionals, to ensure they can work safely around electrical systems and equipment.

Is previous experience required?
This course is for qualified or instructed personnel.

How will this course benefit me?
By ensuring that the learner is equipped to identify and avoid electrical hazards, reducing the risk of electrical accidents and injuries.

How will this course benefit my company?
A reduction in workplace accidents related to electrical hazards that can lead to injuries, medical expenses, and potential legal liabilities.

What standards are referred to in this course?
FSE Regulations

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hensikten med kurset er å gi en oversikt over industriens beste fremgangsmåter for entring av rør og tanker.

Etter fullført kurs skal brukeren kunne:
- Vite hva en lukket tank er
- Gi eksempler på lukkede tanker 
- Beskrive farene i forbindelse med entring av rør og tanker
- Identifiser de viktigste lover og regler i forbindelse med entring av rør og tanker
- Forklare hvordan du kan unngå å entre rør og tanker
- Forklare viktigheten av å følge et Sikkert Arbeidssystem
- Beskrive de individuelle rollene og ansvarsfordelingen for arbeid i rør og tanker
- Forklare viktigheten av gasstesting
- Identifiser akseptable nivåer etter en gasstest
- Gi eksempler på arbeidsutstyr beregnet på entring av rør og tanker
- Forklare hvilke rutiner man skal følge i en nødsituasjon
- Forklare alarmprosedyrene i forbindelse med entring av rør og tanker

Kurset er kun tilgjengelig på engelsk. 

Who is this course for:
Maritime personnel, onshore and offshore.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?
The course looks at the purpose of the ISM Code, which is to maintain safety in international shipping, reduce pollution from vessels, protect the exterior environment and prevent injury or loss of human life.

How will this course benefit my company?

By ensuring you have the knowledge of the purpose of the ISM Code.

What standards are referred to in this course?

The International Convention for the Safety of Life at Sea (SOLAS)

The International Ship and Port Facility Security (ISPS) Code 

The International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

The International Safety Management (ISM) Code 

The International Convention for the Prevention of Pollution from Ships (MARPOL)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Dette kurset vil gi deg en grunnleggende forståelse av farene ved Benzen eksponering og beste praksis ved arbeid på systemer hvor slik eksponering kan forekomme.

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel who are involved in the preparation of dangerous goods for transportation by sea.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

This course aims to provide learners with industry best practice in relation to the transportation of dangerous goods by sea. The course should enable personnel to recognise the classes of dangerous goods and to pack, mark, label and document articles and items correctly.

How will the course benefit my company?

By ensuring you are familiar with industry best practice in relation to the transportation of dangerous goods by sea.

What standards are referenced in the course?

• International Convention for the Safety of Life at Sea (SOLAS)

• International Maritime Dangerous Goods (IMDG) Code

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Este curso está diseñado para permitirle:

• Definir qué se entiende por "caída de objetos".

• Identificar cuáles son las causas comunes de la caída de objetos y sus consecuencias y explicar la importancia de eliminar o reducir el riesgo de que ocurran incidents.

• Identificar las obligaciones de los empleadores y los empleados para eliminar los incidentes de caída de objetos.

• Identificar las áreas que presentan un alto potencial de lesiones al personal en caso de ocurrir un incidente de caída de objetos.

• Identificar ejemplos de malas prácticas.

• Describir las medidas que se deben adoptar para controlar el riesgo de caída de objetos

Course goal: Kurset har som formål å øke brukerens bevissthet rundt viktigheten med personlig verneutstyr. Kurset gjør rede for hvilke plikter og ansvar ansatte og arbeidsgiver har med tanke på personlig verneutstyr.

Learning Objectives

LO1 Definere hva som menes med personlig verneutstyr.

LO2 Identifisere ulike typer personlig verneutstyr.

LO3 Identifisere typiske krav som er knyttet til personlig verneutstyr.

LO4 Beskrive tiltakshierarkiet og vite hvor personlig verneutstyr er plassert i dette. 

LO5 Forklare hvorfor vi må vurdere om det personlige verneutstyret er velegnet og kompatibelt med annet utstyr.

LO6 Forklare kravene til vedlikehold av personlig verneutstyr.

LO7 Beskrive plikter og ansvar den ansatte har i forhold til personlig verneutstyr.

LO8 Forklare hvorfor det er viktig med god informasjon, instruksjon og opplæring i bruk av personlig verneutstyr.

Who is the course for?

All personnel, offshore and on land who require knowledge on waste management.

Is previous experience required?

No previous experience is required.

How will the course benefit me? To be able to manage waste properly, it is important that all employees know the laws and regulations that apply in this area. Waste Management is our joint responsibility!

How will the course benefit my company?

To be able to manage waste properly, it is important that all employees know the laws and regulations that apply in this area.

What standards are referenced in the course?

The Waste Regulations, The Control Regulations and The Pollution Control Act

The ISO 14000 series

EMAS (Eco-Management and Audit Scheme)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal:

This course aims to provide personnel with an awareness of US best practice in relation to noise and hearing conservation in the workplace.

Learning Objectives

LO1 Describe noise-induced hearing loss, and identify the early warning signs and symptoms to look for

LO2 Explain the workings of the human ear, how noise exposure causes damage, and the effects of such damage

LO3 Explain the responsibilities and duties of employers and individual personnel under current legislation

LO4 Explain how noise is measured and identify permissible workplace exposure levels 

LO5 Explain the risk assessment requirements

LO6 Identify the control measures that should be taken to reduce exposure to noise

LO7 Explain the requirements for hearing protection; how to use the different methods of hearing protection and the importance of maintaining hearing protection; advantages, disadvantages and attenuation of various types of hearing protection; instructions on selection, fitting, use and care of hearing protection; and the purpose of audiometric testing and an explanation of the test procedures

LO8 Explain the importance of health surveillance

Kurset er kun tilgjengelig på engelsk.

Course goal: This course provides learners with an awareness of the COSHH regulations, and how they control work with hazardous substances.

Target Audience: This course is aimed at all personnel working in the Oil and Gas Industry.

Learning Objectives

LO1 Explain the COSHH regulations and their applicability to the Oil and Gas Industry

LO2 Explain the legal obligations under COSHH for both employees and employers, and explain the REACH regulations

LO3 Explain the health effects of working with hazardous substances, and the various ways that these can enter the body

LO4 Explain the use of Safety Data Sheets, Labels and Assessments within the COSHH regulations

LO5 Explain the common labelling system and identify the standard symbols

LO6 Explain the appropriate use of Personal Protective Equipment

LO7 Explain requirements for storage, handling and disposal of hazardous substances

LO8  Define the control measures for handling hazardous substances and explain the control hierarchy

LO9 Explain the process for dealing with hazardous substances in the event of a spill

LO10 Define the recording and reporting process within the COSHH Regulations

Course goal: This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace. 

Learning Objectives

LO1 Explain the principles of, and steps involved in, the Risk Assessment process

LO2 Explain that employers have a responsibility for completing Risk Assessments and that employees have a duty to follow Risk Assessment outcomes 

LO3 Identify a typical Risk Assessment form    

LO4 Explain the requirements of the Risk Assessment team 

LO5 Recognise and explain Risk Assessment terminology

LO6 Identify the different steps within the Risk Assessment process 

LO7 Identify common, industry-specific hazards

LO8 Determine the appropriate level of Risk Assessment that may be required

LO9 Explain how to use a Risk Matrix to evaluate the level of risk

LO10 Explain how to identify appropriate control measures based on the Hierarchy of Control

LO11 Explain what is meant by ‘Initial Risk’ and ‘Residual Risk’

LO12 Describe what to do if any Residual Risk remains too high

LO13 Explain how to carry out a Personal Risk Assessment and recognise its importance before each task 

LO14 Explain the importance of Dynamic Risk Assessment  

LO15 Identify situations where ‘Stopping the Job’ may apply

LO16 Explain the importance of communicating the outcomes of a Risk Assessment  

LO17 Understand the importance of communicating ‘Lessons Learned’

Dette kurset er kun tilgjengelig engelsk.

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course provides drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

How will this course benefit my company?
By ensuring you have a basic understanding of the drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.