Oil and Gas

Course catalogue

Category

Reset

Course type

Reset
  • E-learning course

Course provider

Reset
  • Mintra Trainingportal
hits
11
Course code: MTP-066
Course type: E-learning course
Duration: 10 minutes
Language: English and Norwegian
Price: NOK 250,-

This course is designed to raise the awareness of GDPR (2018) throughout the workforce.

We will familiarise staff with the rights of individuals and the obligations of companies.

Learn which territorial areas are affected, and understand the consequences of the improper sharing of personal data, and how to deal with a data breach, should it occur.

The course content is developed in cooperation with Advokatfirmaet Schjødt AS.

 

Course code: IMIST-001
Course type: E-learning course
Duration: 300 minutes
Language: English
Price: USD 99,-

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

 

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

 

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable .

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

 

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

 

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.


Please find pre-course information and learning outcomes here: 

https://mintra.com/implementing-maintaining-opito-standards-policy

Course code: MTP-035
Course type: E-learning course
Duration: 70 minutes + Onboar ...
Language: English, Norwegian, Br ...
Price: NOK 2100,-

Who is this course for:
Every seafarer without designated security duties (STCW Table A-VI/6-1)

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
Piracy and armed robbery is a real threat to seafarer’s onboard ships and mobile units at sea. 1st January 2014 a requirement about seafarer’s security training was put in force for all ships to which the ISPS Code applies.


The training consists of an e-learning course and the performance of certain on board activities described in a checklist. The client’s approved instructors must sign completed checklists for each trainee.

When the training is completed a certificate is issued by the Norwegian Maritime Authority.

How will this course benefit my company?
By ensuring you have the knowledge and are certified according to the STCW regulations.

What standards are referred to in this course?
STCW - Security Awareness, table A-VI/6-1
This training programme in Ship Security Awareness has been approved by the Norwegian Maritime Authority.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MGM-023
Course type: E-learning course
Duration: 50 minutes
Language: English
Price: NOK 700,-

Who is this course for?
Any members of management, supervisor and shipboard management responsible for Ballast Water.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
The primary goal of this course are awareness and knowledge of Ballast Water Management in accordance with the International Convention for the Control and Management of Ships' Ballast Water and Sediments, referred to as the BWM Convention.

How will this course benefit my company?
By ensuring you are familiar with the best practices related to Ballast Water Management.

What standards are referred to in this course?
In compliance with IMOs Ballast Water Management Convention (BWMC) 2004 and industry best practice, and complying with US trade and US Coast Guard.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: MGM-014-CERT
Course type: E-learning course
Duration: 100 minutes + Onboa ...
Language: English
Price: NOK 3000,-

Who is this course for?

Ship Officers

 

Is previous experience required?

Documented 12 months seaservice as an officer onboard an ISPS vessel. 

 

How will this course benefit me?

After successfully completing this course, you should be able to undertake the duties and responsibilities of a Ship Security Officer, as defined in section A/12.2 of the ISPS Code and in section A-VI/5 of the STCW Code. The course enables you to maintain and supervise the implementation of the Ship Security Plan, evaluate the security risk, threat and vulnerability, make regular inspections to ensure that appropriate safeguards are implemented and maintained, and ensure that the security systems are operated, tested and calibrated correctly.

 

How will this course benefit my company?

By ensuring you are qualified and certified as a Ship Security Officer (SSO).

 

What standards are referred to in this course?

STCW A-VI/5 and ISPS code section A/12.2.

The course is approved by the Norwegian maritime Authority. Approved certificate as Ship Security Officer will be issued upon course completion.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%. 

This course is a combined training consisting of: Elearning and onboard training (exercises and checklists).

To complete the course, it is required that you are employed by a company which has a plan for onboard training with these kind of activities.

The course will not be approved for any persons without a connection to a company as described above.

Course code: MTP-067
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian
Price: NOK 400,-

Who is this course for?
Key employees (IT and HR staff, board members)

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course is designed to raise the awareness how organisations, and all employees in contact with personal data are affected by GDPR Legislation (2018).

The course gives an overview of definitions, roles and responsibilities, the rights of individuals and the obligations of businesses with respect to the regulation.

We examine the territorial scope and outline the general requirements, technical solutions and administrative routines required for GDPR compliance, whilst also examining how to handle the issues sourrounding a data breach, should it occur.

The course content is developed in cooperation with Advokatfirmaet Schjødt AS.

How will this course benefit my company?
By ensuring you have the awareness of how organisations, and all employees in contact with personal data are affected by GDPR Legislation (2018).

What standards are referred to in this course?
EU's General Data Protection Regulation - GDPR (2018)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-133
Course type: E-learning course
Duration: 120 minutes
Language: English
Price: NOK 1600,-

Who is the course for?

Personnel who are involved in the preparation of dangerous goods for transportation by sea.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

This course aims to provide learners with industry best practice in relation to the transportation of dangerous goods by sea. The course should enable personnel to recognise the classes of dangerous goods and to pack, mark, label and document articles and items correctly.

How will the course benefit my company?

By ensuring you are familiar with industry best practice in relation to the transportation of dangerous goods by sea.

What standards are referenced in the course?

• International Convention for the Safety of Life at Sea (SOLAS)

• International Maritime Dangerous Goods (IMDG) Code

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Course code: MTP-058
Course type: E-learning course
Duration: 70 minutes + Onboar ...
Language: English, Norwegian
Price: NOK 2100,-

Who is this course for:
Every seafarer with designated security duties (STCW Table A-VI/6-2)

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
Piracy and armed robbery is a real threat to seafarer’s onboard ships and mobile units at sea. 1st January 2014 a requirement about seafarer’s security training was put in force for all ships to which the ISPS Code applies.
The training consists of an e-learning course and the performance of certain on board activities described in a checklist. The client’s approved instructors must sign completed checklists for each trainee. When the training is completed a certificate is issued by the Norwegian Maritime Authority.

This course will be a part of a blended learning in two stages:
The first stage is this e-learning course
The second stage will be on board training reflecting the realities on-board the vessel you are serving on. This training might take a couple of weeks or more to complete, as you will be required to participate in a number of drills.

The training will be complete when all the elements of the checklist pertaining to your designated security duties.

Completion of this course requires that you are employed in a company that has a plan in place for on board training for this kind of activities. Contact Mintra for more information about how to complete this training.

The course will not be approved for private individuals.

How will this course benefit my company?
By ensuring you have the knowledge and are certified according to the STCW regulations.

What standards are referred to in this course?
STCW - Security Awareness, table A-VI/6-2
SOLAS - Safety of Life at Sea
MARPOL - Marine Pollution
ISM Code

This training programme in Designated Security Duties is approved by the Norwegian Maritime Authority.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: IMIST-003
Course type: E-learning course
Duration: 300 minutes
Language: Latin American Spanish
Price: USD 99,-

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

 

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

 

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable .

 

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

 

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

 

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.

 

Please find pre-course information and learning outcomes here: 

https://mintra.com/implementing-maintaining-opito-standards-policy


Course code: MGM-035
Course type: E-learning course
Duration: 90 minutes + Onboar ...
Language: English
Price: NOK 9500,-

Who is the course for?

This course is for personnel who require an insight into Norwegian maritime rules and regulations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide learners with an introduction to the Norwegian maritime rules and regulations and to provide details of how much of an influence Norway has over the global maritime industry.

How will the course benefit my company?

This course will benefit shipping operators and companies by ensuring that their staff have an awareness of the Norwegian Maritime Authority, Norwegian maritime rules and regulations and all other relevant legislation.

What standards are referenced in the course?

International Safety Management (ISM) Code

Freedom of Information Act

Norwegian International Ship Register Act

Ship Labour Act

Ship Safety and Security Act

Norwegian Maritime Act

International Convention for the Safety of Life at Sea (SOLAS)

International Regulations for Preventing Collisions at Sea (COLREGS)

International Convention for the Prevention of Pollution from Ships (MARPOL)

International Ship and Port Facility Security (ISPS) Code

Norwegian Maritime Code

Maritime Labour Convention (MLC)

Equality and Anti-discrimination Act

Accommodation of Crews Convention

Principles of Safe Manning

International Convention on Standards of Training, Certification and Watchkeeping for Seafarer (STCW)

Norwegian Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: IMIST-002
Course type: E-learning course
Duration: 300 minutes
Language: Brazilian Portuguese
Price: USD 99,-

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

 

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

 

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable.

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

 

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

 

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.


Please find pre-course information and learning outcomes here: 

https://mintra.com/implementing-maintaining-opito-standards-policy

Hits per page