Kurskatalog

Who is this course for?
Production operators.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

How will this course benefit my company?
By ensuring you have appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

What standards are referred to in this course?
This course does not refer to specific legislation or standards.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?
This course is aimed at all personnel involved in mechanical isolations.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide all relevant personnel with an overview of best practices in mechanical isolations.

How will this course benefit my company?
The course will benefit companies by ensuring that all relevant personnel have an understanding of mechanical isolation best practices, which will reduce accidents and injuries at work.

What standards are referred to in this course?
No standards or regulations are referenced in this course.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hensikten med kurset er å gi en introduksjon til utfordringer med korrosjon i olje- og gassindustrien.

Etter fullført kurs skal brukeren kunne:
- Hva som menes med korrosjon og hvorfor det utgjør en risiko for olje- og gassindustrien
- Områder der korrosjon vanligvis oppstår i olje- og gassanlegg
- Elementer som er nødvendige for at korrosjon skal kunne oppstå
- De viktigste korrosjonsmedier som funnes i olje- og gassanlegg og hvordan disse kan føre til korrosjon
- Ulike typer korrosjon
- Hvordan korrosjon kan påvirke brønner og rørledninger
- Hvordan korrosjon kan påvirke anlegg og rørledninger
- Hvordan korrosjon kan påvirke gassystemer
- Hvordan korrosjon kan påvirke vannsystemer
- Hvordan korrosjon kan påvirke deadleg områder
- Områder hvor utvendig korrosjon er mest utbredt
- Tiltak for å begrense korrosjon
- Hvordan du spiller en rolle for å minimere korrosjon

Kurset er kun tilgjengelig på engelsk. 

Who is this course for?

This eLearning course is aimed at individuals who are required to work with wells in the oil and gas industry.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide learners with an overview of well integrity and its importance in maintaining safe and secure operations

This course contains the following sections:

Section 1: Well Integrity Overview

Section 2: Well Categorisation and Well Barriers

Section 3: Well Design and the Cementing Process

Section 4: Human Factors in Well Integrity

How will this course benefit my company?

To ensure you have an overview of well integrity and its importance in maintaining safe and secure operations

What standards are referred to in this course?

This course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who work with pressurised cylinders, compressed gas or associated equipment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an overview of the use of pressurised cylinders, the risks involved and storage requirements.

How will this course benefit my company?

By ensuring you have an overview of the use of pressurised cylinders, the risks involved and storage requirements.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Dette kurset er kun tilgjengelig engelsk.

Who is this course for?
Trainee Oil and Gas Operations Technicians / Deck Crew

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an introduction to the use of storage tanks

How will this course benefit my company?
By ensuring you are introducted to the use of storage tanks

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Trainee Oil and Gas Operations Technicians and Maintenance Personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the Heating, Ventilation and Air Conditioning (HVAC) system

How will this course benefit my company?

By ensuring you have an overview of the Heating, Ventilation and Air Conditioning (HVAC) system

What standards are referred to in this course?

Minimum Efficiency Reporting Value (MERV)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This course is aimed at all personnel involved in mechanical joint operations, particularly those who are expected to undertake related duties in the workplace.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide learners with an introduction to the principles of the equipment and technology associated with the bolting of flanged joints for pressurised systems. This course is intended to reflect industry """"best practice"""" for competence in relation to mechanical joint operations and applies to both the onshore and offshore Oil and Gas Industry.

This course contains the following sections:

Section 1: An Introduction to Mechanical Joint Integrity

Section 2: Principles of Hand Torquing

Section 3: Principles of Hydraulic Tensioning

Section 4: Principles of Controlling Tightening

How will this course benefit my company?

By ensuring you are introduced  to the  principles of the equipment and technology associated with the bolting of flanged joints for pressurised systems

What standards are referred to in this course?

N/A

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hensikten med kurset er å introdusere de ulike prosessikkerhetssystemene innenfor olje- og gassindustrien.

Kursinnhold:
- Farer tilknyttet hydrokarboner
- HAZOP-prosessen
- Instrumenterte sikkerhetssystemer
- Brann og gassystemer
- Overtrykksbeskyttelse
- Trykk og lekkasjetesting
- Styring av endringer

Kurset er kun tilgjengelig på engelsk. 

Who is this course for?

Personnel who are required to work with Piping and Instrumentation Diagrams.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will enable you to describe the information provided in a P&ID and explain why this information is useful.

How will this course benefit my company?

Personnel who are able read and understand the information provided in P&IDs are better able to troubleshoot system problems.

What standards are referred to in this course?

• Institute de Algerian Normalisation

• Standards Association of Zimbabwe

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Hensikten med kurset er å introdusere ulike typer flenser og pakninger og deres funksjon.

Etter fullført kurs skal brukeren kunne:
- Viktigheten av å ha sikre mekaniske forbindelser
- Hva som menes med en mekanisk forbindelse
- Ulike typer flenser og flenforbindelser
- Funksjon og hensikt med flenser
- Ulike typer pakninger
- Funksjon og hensikt med pakninger
- Hvordan velge egnet flensforbindelse
- Vanlige flens- og pakningstyper
- Korrekt installasjon og montering av flenser og pakninger
- Prinsipper for momenttiltrekking med håndverktøy
- Prinsippene for hydraulisk tiltrekking
- Kontroll og etterarbeid

Kurset er kun tilgjengelig på engelsk. 

Hensikten med kurset er å gi en innføring i olje- og gassindustrien og de ulike stadiene i forbindelse med å utvinne og produsere hydrokarboner.

Etter fullført kurs skal brukeren kunne:
- Hvordan olje og gass dannes og hvordan man finner olje- og gassforekomster
- Opprinnelsen til hydrokarboner
- Olje- og gass tilbud og etterspørsel
- Kostnadene involvert i olje- og gassproduksjon
- Hvordan leteaktiviteter gjennomføres
- Globale olje- og gassfelt
- Forskjellen på begrepene oppstrøms og nedstrøms
- Typer installasjoner for offshore leting, boring, produksjon og transport
- Hva som menes med grunt vann og dypt vann
- Ulike typer boreutstyr
- Ram-rigg
- Borestrengen og utstyr
- Ulike brønntyper og boreseksjoner
- Etablering av brønnhodet
- Boreslam og sirkulasjonssystemet
- Sementering av brønn
- Brønnkomplettering
- Reservoarproduksjon
- Metoder for å øke produksjonen
- Hva som menes med brønnstimulering
- Overhalingsoperasjoner
- Produksjon, lagring og transport av hydrokarboner
- Plikt og løsninger til fjerning og forlating
- Plugging og forlating

Kurset er kun tilgjengelig på engelsk. 

Who is this course for?

Personnel who require awareness and understanding of the hazards and controls of common compressed air uses.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

How will this course benefit my company?

By ensuring you are introducted  to safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hensikten med kurset er å øke kunnskaper om temaet «Gasskompresjon».

Kursinnhold:
- Introduksjon til gasskompresjon
- Gasskompresjonssystemer
- Gasskompressor, prinsipper
- Gasskompressor, komponenter
- Surgekontroll
- Oppstart og nedstengning
- Innovasjon

Kurset er kun tilgjengelig på engelsk. 

Who is this course for?

For all personnel who are involved in working with gas turbines.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an introduction to gas turbines and how they are designed and operated.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of gas turbines and how they are designed and operated.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims to provide learners with an introduction to the principles of the systems associated with oil and gas processing operations.  

Section 1: An Introduction to Oil Treatment

LO1 Explain the theory behind the process of separation in the Oil and Gas Industry 

LO2 Identify the most common types of separator 

LO3 Identify the requirements for a test separator and explain how they are used to monitor individual well production

LO4 Give an overview of main oil line pumps and explain how they are deployed

Section 2: An Introduction to Gas Compression and Hydrate Prevention

LO5 Give an overview of the process of gas compression

LO6 Describe the different methods of chemical injection used for hydrate prevention (during gas export)

Section 3: An Introduction to Utility Systems

LO7 Identify the different utility systems in use in the Oil and Gas Industry 

LO8 Describe the use of sea water lift pumps and water polishing systems 

LO9 Describe the purpose of cooling systems and heat exchangers 

LO10 Describe the use of heat medium systems 

LO11 Describe the use of potable water systems 

LO12 Describe the use of diesel storage systems for the bunkering, storage and distribution of diesel

Dette kurset er kun tilgjengelig på engelsk.

Hensikten med kurset er å gi en oversikt over fakkel systemet.

Etter fullført kurs skal brukeren kunne:
- Formålet med fakling
- Kildene til fakling
- Viktigheten av å redusere fakling
- De miljømessige konsekvensene knyttet til fakling
- Nødsituasjoner med fakling
- Hvordan giftige gasser kan påvirkes av fakling
- Design og drift av fakkelsystemet
- Flare drums
- Utforming av fakkeltipp
- Oppstart av fakkelsystemer

Kurset er kun tilgjengelig på engelsk. 

Course Goal: This course aims to provide an overview of upstream oil and gas operations

Who is the course for?

Newcomers to the oil and gas industry

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Learning Objectives:

• LO1 Describe how hydrocarbon reservoirs are formed

• LO2 Describe the reservoir appraisal process

• LO3 Identify the configuration of a production Christmas tree   

• LO4 Describe a subsea Christmas tree

• LO5 Describe the function of the choke valve

• LO6 Describe the separation process

• LO7 Describe the test separator

• LO8 Identify the associated gas clean-up process

• LO9 Describe the absorption process

• LO10 Describe the adsorption process

• LO11 Describe the gas compression process

• LO12 Identify the produced water disposal process

• LO13 Describe the crude oil treatment process

• LO14 Describe the crude oil metering process

• LO15 Describe the gas metering process

• LO16 Describe process control

• LO17 Identify enhanced oil recovery methods

Kurset er kun tilgjengelig på engelsk. 

Hensikten med kurset er å øke kunnskaper om temaet «Olje- og gassmåling, prøvetaking og pigging».

Kursinnhold:
- Introduksjon til måling
- Gassmålingsprinsipper
- Gåssmåling
- Oljemåling
- Måleoperasjoner
- Prøvetakingssystemet
- Pigging

Kurset er kun tilgjengelig på engelsk. 

Hensikten med kurset er å gi en oversikt over de sikkerhetsregler som må tas når du arbeider med elektrisk utstyr.

Etter fullført kurs skal brukeren kunne:
- Betydningen av elektriske sikkerhetsregler
- Lover og regler for å forebygge skader fra elektrisitet på arbeidsplassen
- Felles terminologi for elsikkerhet
- Generelle forholdsregler og sikkerhetsprosedyrer som skal følges når du jobber med elektrisk utstyr
- Valg av riktig personlig verneutstyr som skal brukes til spesifikke elektriske oppgaver
- Iverksette tiltak i tilfelle en nødssituasjon

Kurset er kun tilgjengelig på engelsk.