Kurskatalog

Who is this course for?
This course is aimed at all personnel involved in mechanical isolations.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide all relevant personnel with an overview of best practices in mechanical isolations.

How will this course benefit my company?
The course will benefit companies by ensuring that all relevant personnel have an understanding of mechanical isolation best practices, which will reduce accidents and injuries at work.

What standards are referred to in this course?
No standards or regulations are referenced in this course.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who work with pressurised cylinders, compressed gas or associated equipment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an overview of the use of pressurised cylinders, the risks involved and storage requirements.

How will this course benefit my company?

By ensuring you have an overview of the use of pressurised cylinders, the risks involved and storage requirements.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Hensikten med kurset er å introdusere de ulike prosessikkerhetssystemene innenfor olje- og gassindustrien.

Kursinnhold:
- Farer tilknyttet hydrokarboner
- HAZOP-prosessen
- Instrumenterte sikkerhetssystemer
- Brann og gassystemer
- Overtrykksbeskyttelse
- Trykk og lekkasjetesting
- Styring av endringer

Kurset er kun tilgjengelig på engelsk. 

Hensikten med kurset er å øke kunnskaper om temaet «Gasskompresjon».

Kursinnhold:
- Introduksjon til gasskompresjon
- Gasskompresjonssystemer
- Gasskompressor, prinsipper
- Gasskompressor, komponenter
- Surgekontroll
- Oppstart og nedstengning
- Innovasjon

Kurset er kun tilgjengelig på engelsk. 

Course Goal: This course aims to provide learners with an introduction to the principles of the systems associated with oil and gas processing operations.  

Section 1: An Introduction to Oil Treatment

LO1 Explain the theory behind the process of separation in the Oil and Gas Industry 

LO2 Identify the most common types of separator 

LO3 Identify the requirements for a test separator and explain how they are used to monitor individual well production

LO4 Give an overview of main oil line pumps and explain how they are deployed

Section 2: An Introduction to Gas Compression and Hydrate Prevention

LO5 Give an overview of the process of gas compression

LO6 Describe the different methods of chemical injection used for hydrate prevention (during gas export)

Section 3: An Introduction to Utility Systems

LO7 Identify the different utility systems in use in the Oil and Gas Industry 

LO8 Describe the use of sea water lift pumps and water polishing systems 

LO9 Describe the purpose of cooling systems and heat exchangers 

LO10 Describe the use of heat medium systems 

LO11 Describe the use of potable water systems 

LO12 Describe the use of diesel storage systems for the bunkering, storage and distribution of diesel

Dette kurset er kun tilgjengelig på engelsk.

Course Goal: This course aims to provide an overview of upstream oil and gas operations

Who is the course for?

Newcomers to the oil and gas industry

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Learning Objectives:

• LO1 Describe how hydrocarbon reservoirs are formed

• LO2 Describe the reservoir appraisal process

• LO3 Identify the configuration of a production Christmas tree   

• LO4 Describe a subsea Christmas tree

• LO5 Describe the function of the choke valve

• LO6 Describe the separation process

• LO7 Describe the test separator

• LO8 Identify the associated gas clean-up process

• LO9 Describe the absorption process

• LO10 Describe the adsorption process

• LO11 Describe the gas compression process

• LO12 Identify the produced water disposal process

• LO13 Describe the crude oil treatment process

• LO14 Describe the crude oil metering process

• LO15 Describe the gas metering process

• LO16 Describe process control

• LO17 Identify enhanced oil recovery methods

Kurset er kun tilgjengelig på engelsk. 

Hensikten med kurset er å øke kunnskaper om temaet «Olje- og gassmåling, prøvetaking og pigging».

Kursinnhold:
- Introduksjon til måling
- Gassmålingsprinsipper
- Gåssmåling
- Oljemåling
- Måleoperasjoner
- Prøvetakingssystemet
- Pigging

Kurset er kun tilgjengelig på engelsk. 

Who is this course for?

Oil and Gas Operations Technicians

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of coiled tubing equipment and its operation

How will this course benefit my company?

To ensure you have an overview of coiled tubing equipment and its operation

What standards are referred to in this course?

This course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

This course contains nine modules:

Module 1: Introduction to Water Injection

Module 2: Reservoirs and Rock Properties

Module 3: Waterflooding

Module 4: Injection Water Impurities

Module 5: Water Treatment

Module 6: Water Injection Systems

Module 7: Water Quality Monitoring

Module 8: Well Design and Construction

Module 9: Operation of the Water Injection System

Kurset er kun tilgjengelig på engelsk. 

Who is this course for?

All relevant personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

You will be introduced to the purpose of separation

This course contains ten modules:

Module 1: The Purpose of Separation

Module 2: Reservoir Fluids

Module 3: The Principles of Separation

Module 4: Separator Types

Module 5: Separator Construction

Module 6: Multi-stage Separation

Module 7: Separator Control

Module 8: Separator Operation

Module 9: Problems Associated with Separators

Module 10: New Separation Technology

How will this course benefit my company?

Ensure you are introduced to separation

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Dette kurset er kun tilgjengelig på engelsk.

Who is this course for?

Process and Production personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

By ensuring you have an overview of industry best practice associated with gas treatment

This course contains seven modules:

Module 1: Introduction to Gas Treatment

Module 2: Problems Associated with Water in Gas Streams

Module 3: Liquid Desiccant Dehydration

Module 4: Solid Desiccant Dehydration

Module 5: Alternative Gas Dehydration Processes

Module 6: Acid Gas Removal Unit

Module 7: Removal of Other Impurities in Raw Gas Streams

How will this course benefit my company?

By ensuring you have an overview of industry best practice associated with gas treatment

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Dette kurset er kun tilgjengelig på engelsk.

Who is this course for?

Personnel requiring an awareness and understanding of power generation systems and their associated risks.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to proivde learners with an overview of power generation systems used offshore.

How will this course benefit my company?

To ensure you have an overview of the power generation systems used offshore including hazards and their associated controls.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hensikten med kurset er å gi informasjon om typiske gasser innenfor olje- og gassindustrien og hvordan disse gassene kan oppdages og måles.

Etter fullført kurs skal brukeren kunne:
- Brannfarlige gasser som finnes i olje- og gassindustrien
- Giftige gasser som kan finnes i olje- og gassindustrien
- Hvordan detektere brannfarlige og giftige gasser
- Faste brann- og gassdeteksjonssystemer
- Bærbare gassdeteksjonssystemer
- Måling av brennbare gasser
- Måling av ikke-brennbare gasser
- Måling av giftige gasser

Kurset er kun tilgjengelig på engelsk. 

Who is the course for?

All personnel, especially those who require an overview of produced water systems.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course is designed to provide you with a basic knowledge of how water is removed from oil and gas reservoirs and how it is treated prior to reuse or disposal.

How will the course benefit my company?

This course helps to ensure that all personnel apply a common approach to both company and industry best practice in relation to managing produced water.

What standards are referenced in the course?

• The Offshore Petroleum Activities (Oil Pollution Prevention and Control) Regulations 

• The Registration, Evaluation, Authorisation and Restriction of Chemicals Regulation (REACH)

• OSPAR Harmonised Mandatory Control Scheme (OSPAR HMCS)

• US Environmental Protection Agency Federal Insecticide, Fungicide and Rodenticide Act (FIFRA)

• Methodology for the Sampling and Analysis of Produced Water

• Environmental Protection Agency's Method 1664

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hensikten med kurset er å gi en oversikt over gjenvinningsprosessen for glykol.

Etter fullført kurs skal brukeren kunne:
- Formålet med gjenvinning av glykol
- Adsorpsjons- og absorpsjonsprosesser
- Gjenvinningsprosessen for glykol
- Utstyret som kreves for gjenvinning av glykol
- Vanlige problemer som kan oppstå under gjenvinning av glykol og kompenserende tiltak som kan iverksettes

Kurset er kun tilgjengelig på engelsk. 

Hensikten med kurset er å gi en oversikt over hvordan utslipp av hydrokarboner styres.

Etter fullført kurs skal brukeren kunne:
- Utviklingen av styring av hydrokarbonlekkasjer for å redusere risiko
- Instrumenterte sikkerhetssystemer
- Innføring av arbeidstillatelsessystemet
- Barrierer og isolasjonsprosedyrer
- Brann- og gassdeteksjonssystemer
- Rapportering av hydrokarbonlekkasjer
- Egenskaper og faseendring av hydrokarboner
- Farene ved eksponering for hydrogensulfid (H2S) og symptomer på H2S-forgiftning
- Omfanget av lekkasjerater som kan oppstå

Kurset er kun tilgjengelig på engelsk. 

Who is this course for?

Personnel who require a basic understanding of the operation of diesel engines and the importance of maintaining good lubrication for their safe operation.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an overview of how diesel engines operate, their components and their use within the industry. It will also outline the importance of maintaining good lubrication for their safe operation.

How will this course benefit my company?

This course will provide personnel with an overview of how diesel engines operate and the importance of maintaining good lubrication for their safe operation.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims to provide learners with an overview of gas liquids and their chemical and physical properties. 

Learning Objectives:

Section 1: An Overview of Gas Liquids

Section 2: Chemical and Physical Properties of Gas Liquids

Section 3: Liquefied Petroleum Gas

Section 4: Natural Gas Liquids (NGL) Recovery

Section 5: Removal of Natural Gas Impurities

Section 6: Liquefaction of Natural Gas

Section 7: Shore-Based Storage of Gas Liquids

Section 8: Transportation of Liquefied Natural Gas

Section 9: Health, Safety and Environmental (HSE) Issues of Gas Liquids

Kurset er kun tilgjengelig på engelsk. 

Dette kurset er kun tilgjengelig engelsk.

Who is this course for?
Process Operators and Lab Technicians

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an overview of the various types of process chemicals, their use and how they work.

Section 1: Basic Introduction to Chemistry
Section 2: Process Chemicals in the Oil and Gas Industry
Section 3: Identifying the Risks in the Use of Process Chemicals
Section 4: Managing Chemical usage

How will this course benefit my company?
By ensuring you have an overview of the various types of process chemicals, their use and how they work.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require knowledge or awareness of systems and equipment used for hydrocarbon processing.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide personnel with a broad overview of compressors, safety and controls systems, prime movers and ancillary systems.

How will this course benefit my company?

By ensuring you have an overview of common hydrocarbon processing systems and equipment and their associated hazards and controls.

What standards are referred to in this course?

There are no specific regulations referenced. The course is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.