Course catalogue

Who is the course for?

Personnel who require an overview of the steps involved in the process of disconnecting flowlines.

Is previous experience required?

You do not require previous experience to complete this course.

How will the course benefit me?

By providing you with an overview of the steps involved in the process and disconnecting flowlines and the associated safety controls.

How will the course benefit my company?

By ensuring personnel are aware of the hazards posed by disconnecting flowlines and the steps that should be followed to ensure that the work is carried out safely.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of US fire extinguishers.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of portable fire extinguishers.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US portable fire extinguishers.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

This course focuses on the basic elements of MOB boat training and may be completed regardless of the type of boats participants use.

Who is this course for?

Personnel requiring an awareness or understanding of psychosocial work environments.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of what is meant by the psychosocial working environment.

How will this course benefit my company?

By ensuring you have an overview of psychosocial working environments.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The main objective of the course in pressure testing is to provide each course participant the basic knowledge of the preparation, planning, execution and documentation of pressure testing as a discipline.

Focus on safety and proper selection of equipment is essential to prevent accidents and loss of assets.

Training will be made according to specific standards. The course will include a theoretical part, practical part and examinations.

Course Content

Theoretical part

The main tasks during the course will be:

- Different methods for pressure testing

- Performance of pressure testing

- Work Packages and drawings

- HSE

- Equipment for pressure testing

- Pressure and temperature theory

- Introduction in fittings and thread types

- Flanges, Gaskets and Bolts

- Valves

- Standards, calibration and documentation

Practice

The simulated practice test will be performed on a training jig under supervision of an instructor. There will be reviewed work packages for performing virtually work packages which will be out in the field.

Who is the course for?

Personnel requiring an awareness or understanding of lubrication systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

This course aims to introduce learners to the role of lubrication systems in maintaining mechanical equipment.

How will the course benefit my company?

By ensuring you are introduced to the role of lubrication systems in maintaining mechanical equipment.

What standards are referenced in the course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Your talent is your most important resource. Deploying it to implement different methods of coaching will not only help you to strengthen your team’s abilities, but also your own leadership skills. No matter where you are, no matter how many people you put together on a team, you will always experience the same phenomenon. Some team members will perform above expectations while others will perform at an average or standard level, and some will perform at substandard levels. Coaching is a performance process with lots of actions and steps. Let’s take a look at some of the ways to coach your team and how you can make the most of these opportunities.

• Identify how to coach the low performing employees 

• Implement the techniques to coach the average performing employees 

• Coach the high performing employees 

• Meet the challenges of coaching remote employees

Kurset gir sertifisering for arbeid og entring iht. Norsk forskrift nr. 1357 "Forskrift om utførelse av arbeid".

Innhold
- Forskrifter, regelverk og retningslinjer for arbeids- og entringstillatelser
- Sikker entring
- Lekkasjesøk
- Prinsipp for rengjøring og gassfriing av systemer/tanker med vann, damp og nøytralgass N2
- Bærbare gassmålingsinstrumenter som kan måle i nøytralgass(inert) atmosfære
- Teoretiske og praktiske øvelser i gassfriings- og rengjøringsmetoder
- Utarbeide spylingsplan for N2, avstengningsplan og utblindingsplan iht prosedyre
- Gassmålinger i anlegget iht utarbeidede planer over
- Gassfriing (skarp øvelse)
- Avsluttende skriftlig test

Very few leaders are born with the qualities required to inspire and lead others. Most leaders are built—through personal effort, lots of introspection, and assistance from mentors and other leaders. In this course, you’ll learn the six characteristics that set effective leaders apart. You’ll discover the differences between managing and leading, and when to do each. And you’ll find out how to create a plan that will help you move from simply managing results to setting vision and leading others.

• Differentiate between managing and leading  

• Create leadership development action plan

The goal of this course is that all personnel who use hazardous work equipment, will gain good knowledge of HSE when using work equipment. The course deals with personnel requirements, roles and responsibilities, as well as accidents and regulations on safety.

In addition, the course requires that practical training is conducted on applicable work equipment.

The course covers the following topics:

• Work equipment in general
• Use of work equipment
• Selection of work equipment
• Training in the use of work equipment
• Workspaces and personnel requirements
• Risk assessment
• Safety, accidents and liability
• Direct and underlying causes of accidents
• Relevant laws and regulations

The course includes exercises, and final test with 30 questions.

Hensikten med kurset er å gi opplæring av riktig og sikker bruk av fallsikringsutstyr og bruk av redningsutstyr. Kurset gir kandidaten opplæring i hvordan de skal gjøre seg kjent med vedlikeholdsrutiner og produsentens bruksanvisning slik at fallsikrings- og redningsutstyr brukes på en riktig og sikker måte.

Leksjon 1 i Mod. O-2.2 og siste punkt i leksjon 2 i Mod. O-3.2

Kursinnhold
- Innledning
- Regelverk, standarder og retningslinjer
- Risikovurdering og risikohåndtering
- Konsekvenser av et fall i fallsikringsutstyr
- Kjennskap og ferdigheter til relevante typer fallsikringssystem, utstyr og metoder
- Krav til vedlikehold, oppbevaring og kontroll
- Skriftlig prøve

This course is only available in Norwegian.

E-læringskurset gjør deg i stand til å komme raskt i gang med programmene i Office 2013. Her får du opplæring i bruk av Word 2013, Excel 2013, PowerPoint 2013 og Outlook 2013, samlet i ett og samme e-læringskurs. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene. E-læringskurset inneholder 70 opplæringsvideoer.

Kursinnhold
Innføring i Word 2013, Excel 2013, PowerPoint 2013, Outlook 2013.

The course is only available in Norwegian.

In today’s competitive world, businesses move faster and faster to stay ahead of the competition, develop new offerings, and keep up with client demands, employees need constant feedback, support, and direction in order to achieve those objectives. The era of the annual performance review is long gone, with managers now meeting with team members frequently to set goals, coach, provide training, and review performance. Performance dashboards that automate company-wide goals, metrics, customer feedback, and other performance-related data keep leaders and team members aware of their progress. Instead of looking backward, the new model for managing and motivating employee performance is fast-paced and feedback focused.

• State the best practices to improve the performance management process 

• Explain the review model

Time is more valuable than money. You can get more money, but you cannot get more time.

-JimRohn, an American entrepreneur, author, and motivational speaker 

Meetings are necessary, but they become intolerable when they drag on and on, start late, or the discussion goes off the track. It’s annoying when you feel that your time has been hijacked—especially when other projects and responsibilities are in the pipeline. Poor time management is often the cause of this distress. Meetings would be more productive—and less irritating—if all activities started on time, ended on time, and stayed on the topic. As a leader, it is your responsibility to ensure that meetings are of benefit to the participants and satisfy the meeting objectives. Running a successful meeting can be boiled down to three things: be purposeful, be engaged, and be respectful of the attendees’ time.

• Explain the importance of adhering to meeting time 

• Interpret the impact of delaying a meeting 

• Respect others’ time

This course covers the necessary competence for being in command of a lifeboat in the event of a shipwreck or accident requiring evacuation, in other words, the entire rescue phase which consists of boarding and launching the lifeboat, moving to a safe distance from the installation and staying on the lifeboat at sea.

Course Content

- Prepare a conventional lifeboat for evacuation

- Organise and supervise embarkation

- Launch the lifeboat

- Attend to the passengers and facilitate the stay onboard after an evacuation.

- Establish and maintain communication with the rescue unit.

This course is valid for 24 months.

Accountability is an individual’s acceptance of responsibility for the outcome of a job, project, or program. There are five steps that you can use to engineer accountability into both, your work processes and your employees to achieve performance goals.

• Define accountability 

• Describe the five steps to accountability 

• Apply the five steps of accountability

Review of the two pages from where one can register hours in OCS Self Service – Hours per week and Timesheet. Manual registration, hour generation, project pinning and approving hours. Manager’s approval of hours for employees. 

E-læringskurset gir deg en opplevelsesrik og praktisk opplæring i regnearkprogrammet Excel 2016. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye funksjonene og verktøyene. E-læringskurset inneholder 59 opplæringsvideoer.

E-læringskurset er tilpasset Office 365.

Testene i e-læringskurset måler kunnskap før, under og etter opplæringen. Når ettertesten er bestått får du tilgang til et kursbevis i PDF-format som enkelt kan lagres eller skrives ut.

Innhold:

- Før du starter

- Redigering

- Formler

- Formatering

- Funksjoner

- Diagram

- Lister og tabeller

- Flere regneark

- Utskrift