Course catalogue

Who is this course for?

Personnel requiring awareness or understanding of glycol regeneration.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of the process of glycol regeneration

How will this course benefit my company?

By ensuring you have an overview of the process of glycol regeneration.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The course covers the theoretical part of training the hooker and signaler. The course will provide you with basic theoretical knowledge about the correct selection, control, use and maintenance of various types of lifting equipment. (Regulations on the performance of work § 10-1 and § 10-2).

The course includes these topics:

• Lifting equipment, words and expressions

• Hooking and center of gravity

• Lifting tables

• Fiber slings

• Chain gear

• Steel rope slings

• Shackles

• Eye bolts and eye nuts

• Signals and signs, load management

• Safety rules

• Exercises

• Final test

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations.

Dette kurset tilfredsstiller krav i Norsok R-003 tillegg B.8 og B.9 vedlikehold og verifikasjon av kompetanse. Simulator trening bør gjennomføres minst hvert tredje år for kranoperatører G5 offshorekran, dekksoperatører kan delta for å øke risikoforståelse, holde seg oppdatert på regelverk.

Målsetningen med kurset er at kranoperatør skal tilegne seg tilstrekkelig kunnskap om sikker bruk av G5 offshorekraner til å håndtere last internt på innretning, til og fra fartøy mellom faste eller flytende innretninger og undervannsløft på en sikker måte. Risikoforståelse, riktig adferd, teknisk systemforståelse og krav i NORSOK R-003 er hovedfokus under gjennomføring.

Kursinnhold: 
- Kartlegging av kompetanse
- Kjennskap til ulykker innen kran- og løfteoperasjoner
- Lover, forskrifter, standarder og brukermanual
- NORSOK R-003 sikker bruk av løfteutstyr
- Løfteinnretningens tekniske oppbygning og virkemåte
- Løfteinnretningens sikkerhetssystemer
- Vedlikehold og sakkyndig kontroll
- Planlegging av løfteoperasjoner
- Simulatortrening: kritiske løfteoperasjoner, personalløft med MOB-båt/personalbasket og løft under marginale værforhold
- Simulatortrening: Bruk av sikkerhetssystemer, AOPS, MOPS, nødlåring og nødkjøring
- Simulatortrening: fokus på personlig faktor og reaksjonsmøter
- Evaluering etter hver øvelse i simulator
- Teoretisk eksamen

Påmelding
- Påmeldingsskjema skal fylles ut og returneres sammen med en PO eller akseptert betalingsmetode.
- PO eller akseptert betalingsmetode kan sendes til RA-NOR-AMAdminSupport@nov.com. 
- Ordrebekreftelse og Joining Instruction vil bli sendt så snart deltakeren har fått plass.

Kansellering
- Hvis kjøper kansellerer mindre enn tretti (30) dager før oppstartsdato, vil kjøper bli belastet 100% av beløpet for opplæringen.
- Selger forbeholder seg retten til å kansellere og / eller planlegge ny dato på kurs med lav påmelding opptil to (2) uker før startdato for kurset.

No show
Ved manglende oppmøte, forbeholder selger seg retten til å fakturere kjøper for "no show" 100 % av beløpet for opplæringen.

NATIONAL OILWELL VARCO, L.P. OG DETS AFFILIATER VILKÅR OG BETINGELSER gjelder for alle kurs. 

Who is this course for?

Personnel requiring an awareness or understanding of sealed sources of radiation in the US.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of sealed radiation sources.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US operations involving sealed radiation sources.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

The object of this course is to help participants maintain and develop their knowledge, skills and attitudes regarding their operational / emergency response function.

Course Content

Portions of this course will include group discussion and exchange of experiences, led by a helicopter pilot in active offshore service or with experience from offshore flying:

- Experiences from helideck service

- Improvement potential

Participants should also be able to: 

- Learn from the experience and incidents of other helideck personnel.

- Transfer their own experience as heliguards/HLO to other helideck crews.

This course is valid for 24 months.

COURSE DESCRIPTION

In a risk assessment,  potential events and consequences are considered. In this course, we focus on unwanted events such as failures and accidents. This could be, for example, a gas leak or afire at an oil platform, that equipment stops working during an operation in a hospital, or that an accident occurs during the execution of a work task. The risk analysis process consists of three phases:

1) Planning

2) Risk assessment

3) Risk management

This course shows how these phases can be planned and implemented in practice. There are many guidelines and standards on how a risk assessmentcan be carried out, and many are adapted to particular industries and professional areas. This course presents a general approach that can be used in most industries.

COURSE CONTENT

•Introduction:What is risk? What is the purpose of a risk assessments?

•Risk assessment and risk management:Description of the steps in a risk assessment, what is important to look out for in the various steps, and how the risk assessment can be applied in risk management.

•Risk analysis methods:There are numerous risk assessment methods that are suitable for looking at different issues. An introduction is given to some of these; Hazid/ course risk analysis, SJA, HAZOP, FMEA and QRA. It’s crucial to choose a method that is well adapted to the problem you are looking at.

STANDARDS REFERRED TO IN THIS COURSE

- ISO 31000:2018 Risk Management

HOW WILL THIS COURSE BENEFIT ME, AND MY COMPANY?

After completing the course, participants should be able to understand what a risk assessment is and have knowledge of the relevant steps. Participants will also have basic knowledge of:

•Different risk analysis methods.

•Choice of risk analysis methods within the three main categories; simplified risk assessment, standard risk assessment and model-based risk assessment.

•Typical pitfalls for planning and carrying out risk assessments.

•Understanding how risk assessments can contribute to decision support.

For more information and prices:

http://www.hseacademy.com

learning@proactima.com

Phone: + 47 4000 1933

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

How will this course benefit my company?
By ensuring you have an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hensikten med kurset er å gi blivende kranførere god teoretisk og praktisk grunnopplæring på fastmonterte hydrauliske kraner. Kurset gir elevene god innsikt i prinsippene for kranens konstruksjon og virkemåte. Etter endt kurs med bestått teoretisk prøve vil denne sammen med bestått praktisk kjøreprøve være grunnlaget for utstedelse av kranførerbevis G20 Fastmontert hydrauliske kraner.

Opplæringen dekker kompetansekrav i NORSOK standard R003N for Kranfører G20. 

Kursinnhold
- Innledning
- Konstruksjon
- Hydraulikk
- Mekanikk
- Lover / forskrifter / standarder
- Ståltau / vinsj / blokker
- Dokumentasjon
- Sikkerhetsbestemmelser
- Løfteredskap
- Øvingsoppgaver
- Eksamen

This course is only available in Norwegian.

Who is this course for?
All well intervention personnel working with tools where explosives are an integrated part of the operation

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to give learners an introduction to explosives used in well intervention operations

How will this course benefit my company?
By ensuring you have an introduction to explosives used in well intervention operations

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.