Course catalogue

Hensikten med opplæringen er å gi blivende riggere en god praktisk grunnopplæring i sikker bruk av riggerutstyr. Opplæringen skal gi elevene god innsikt i prinsippene for riggutstyrets konstruksjon, virkemåte, bruk og vedlikehold, slik at uhell og ulykker i forbindelse med riggoperasjoner unngås. Riggoperasjon: Bruk og sammenstilling av transportabelt løfteutstyr og/ eller manuelle/ kraftdrevne vinsjer, taljer etc. som benyttes ved horisontal og/ eller vertikal forflytning av last. Opplæringen dekker den nødvendige teoretiske og praktiske opplæringen som er nødvendig for å kunne gjennomføre selvstendige riggoperasjoner. Opplæringen avsluttes med en praktisk prøve.

Modul O-2.2: Fallsikring - Søylesvingkran / enkel traverskran - Taljer / vinsjer. (16 timer opplæring).

Modul O-3.2: Rigging (32 timer opplæring) Beviset kan utstyres med opplæringsbedriftens/virksomhetens logo.

This course is only available in Norwegian.

Objective: The aim of the training is that those who are given training are given the opportunity to acquire theoretical and practical knowledge about fall protection and the correct use of rescue equipment, rescue of free-hanging persons, rescue of personnel over open sea, tank, stretcher transport, descent and treatment of personnel after fall accident.

The training is adapted for personnel who are part of fall protection / rescue teams on board an installation, but also for personnel who want a basic understanding of a rescue operation, evacuation equipment after a fall accident when using fall protection / rescue equipment.

The course runs over 3 days (24 hours)

Repetition 2 every year in accordance with NOG 113 and SFS.

Content:

- Introduction
- Regulations, guidelines
- Best practice
- Risk assessment
- Fall protection equipment
- Use of personal protective equipment
- Knowledge of different equipment and methods
- The equipment's limitations and possibilities
- Requirements for maintenance, storage and control
- Consequences of falls

Practical and theoretical review of rescue exercises

- Planning and risk assessment of rescue
- Basic first aid
- Rescue operation w / fresh air equipment
- Rescue of a hanging person
- Rescue from tanks / cramped spaces
- Rescue over open sea
- Descent / hoisting of person
- Stabilization of person
- Knowledge of hanging trauma

Objective: The aim of the training is that those who are given training receive a repetition of acquired competence in theoretical and practical understanding of safe work operations / emergency operations with offshore cranes so that accidents and incidents can be avoided.

The aim of the training is that those who are given training receive a repetition of acquired competence in theoretical and practical understanding of safe work operations / emergency operations with offshore cranes so that accidents and incidents can be avoided.

The training is according to training plan module P-4.1.1 covers repetition requirements in NORSOK R-003.

Validity:

3 years according to NORSOK
2 years according to OPITO

Holders of a G5 certificate must meet the requirements for updating through module P-4.1.1 "Offshore crane simulator" within three years, and then update this every three years. If this update is not carried out the certificate is still valid, but the G5 certificate holder cannot operate a crane until the requirements for the simulator training have been completed.

Content:

- Introduction
- Accidents and accidents with offshore cranes
- Laws, regulations, standards, regarding offshore cranes
- Operational limitations of crane operations
- Planning of lifting operations (TBT, SJA, Work permits)
- Internal lifting, loading and lifting from / to supply boats, critical lifts, transport of personnel
- Emergency operations
- Communication
- Practical operations use of simulator
- Theoretical and practical exam

Objective: The purpose of the training is to provide personnel working with load securing with basic training in load securing and user control of load carriers.

The course satisfies the requirement for documented training in the Regulations on the performance of work best. no. 703, Norsok R-003N and NOG 116, and is carried out with theory and practice according to training plan O-2.6.

The course consists of 4 hours of theoretical e-learning and 16 hours of practical training in classrooms / practice rooms.

The practical training ends with a practical test to ensure that each participant has acquired sufficient knowledge of:

- Proper use of personal protective equipment
- User control of load carriers and assessment of whether it can be used
- Plan and carry out packing and securing of a given load
- Correct securing of the work area
- Choose the right load carrier
- Proper use of various load securing equipment

Content theory

- Introduction
- Unwanted events and non-conformance reporting
- Risk assessment
- Regulations, standards and NOG guidance
- Documentation
- Personal protective equipment
- Various load carriers, planning, user control and packaging
- Use and control of load securing equipment
- Theoretical exam

Practical exercises

- Use of personal protective equipment
- Implementation of user control
- Plan and carry out loading and securing of cargo
- Proper use of auxiliary tools
- Checklists
- Safety during work
- Use of barriers
- Practical exam

Objective: The course gives personnel a good theoretical and practical basic training in casting the socket according to EN 13411-4

The course gives personnel a good theoretical and practical basic training in casting the socket according to EN 13411-4. The training is for personnel who in their daily work will use or use steel ropes. This can be deck personnel, sailors, drilling personnel, crane operators or inspectors.

The course lasts 1 day (8 hours).

Content:

- Introduction
- Regulations
- Steel rope
- Sockets casting theory according to standard EN-13411-4
- Protective measures during casting
- Practical casting
- Cutting of steel ropes
- Preparation
- Cleaning
- Casting
- Control
- Exam

Objective: The purpose of the training is to provide crane operators, banksman / signalers with good general basic training in the safe use of lifting equipment, so that accidents and incidents in connection with use are avoided.

The authorities set requirements for basic safety certification of persons who are to drive forklifts, mass transfer machines and cranes. The requirements include both theoretical and practical training. To complete the common theory, one must take and pass a theoretical exam.

The G11 Lifting equipment Module 2.3 course gives you who will work with lifting equipment knowledge about safety, daily control and maintenance as well as disposal rules for various lifting equipment. We want to give you a conscious attitude to the dangers that can arise and how to avoid them. Our G11 course is led by instructors with great competence and practical experience from the use of lifting equipment.

Module 1.1 Working environment, responsibilities and consequences are common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, you can start right on module 2.3.

Contents Module 1.1

- Laws and regulations
- Working environment, responsibilities and consequences
- Environmental
- Safety regulations
- Dangerous goods, marking and handling

Contents Module 2.3

- Laws and regulations
- Work equipment and accessories
- Construction and operation
- Lifting gear
- Control and inspection
- Cargo handling
- Work environment
- Dangerous cargo
- Final theoretical test

Objective: The purpose of the training is to provide the prospective winch operator with a good theoretical basic training in the safe use of winches with associated equipment.

The training gives participants good insight into the principles of electric, pneumatic and hydraulically driven winches' design, operation, use and maintenance, so that accidents in connection with winch operations are avoided.

Content:

• Introduction

• Construction and operation

• Name of components

• Certification, marking

• Coil devices, safety equipment

• General safety rules and emergency procedures

• Correct and incorrect use of winches

• Restrictions on use

• Inspection, maintenance and disposal rules for winches, wire ropes, blocks, etc.

• Theoretical exam

Objective: The purpose of the training is to provide users of work equipment mentioned in § 10-1 and 10-3 in «Regulations on the performance of work» (no. 1357), a good general basic training in the safe use of work equipment, so that accidents and accidents in connection with use is avoided.

The authorities set requirements for basic safety certification of persons who are to drive forklifts, mass transfer machines and cranes. The requirements include both theoretical and practical training. To complete the common theory, one must take and pass a theoretical exam.

Module 1.1 Working environment, responsibilities and consequences are common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, you can start right on module 2.3.

Content:

- Laws and regulations
- Working environment, responsibilities, and consequences
- Environmental
- Safety regulations
- Dangerous goods, marking and handling

Hensikt:

Målsetting med opplæring er at den som gis opplæring tilegner seg tilstrekkelig kunnskap om metoder for å lede og veilede løfteoperasjoner slik at de blir forskriftmessig utført.

Opplæringen gir også kunnskap om farer forbundet med løfteoperasjoner samt bruk av risikokartlegging.

Kurset gir deltakere kunnskap til å kunne utøve overordnet operasjonell ledelse av løfteoperasjoner. Med det menes å kunne planlegge, risikokartlegge og evaluere, samt forebygge ulykker. Videre vil deltaker også tilegne seg kunnskaper om å gjøre rede for materialhåndteringsplan, oppbevaring og bruk av utstyr.

Målsetting med opplæring er at den som gis opplæring tilegner seg tilstrekkelig kunnskap om metoder for å lede og veilede løfteoperasjoner slik at de blir forskriftmessig utført.

Innhold:

• Krav og ansvar til rollen operasjonelt ansvarlig

• Lover, forskrifter, standarder og retningslinjer som gjelder vedr. bruk av løfteutstyr

• Overordnet operasjonell ledelse av løfteoperasjoner

• Helhetlig planlegging av løfteoperasjoner

• Risikokartlegging

• Identifisering av og etablering av barrierer. Gjennomføring og evaluering av en løfteoperasjon

• Informasjonsutveksling

• Krav for oppbevaring av løst løfteutstyr

• Krav for ulike typer løfteutstyr

• Krav til fadder, praksis og sensor

• Avsluttende prøve

Objective: The aim of the training is that theoretical and practical knowledge about fall protection and the correct use of rescue equipment, rescue of free-hanging persons, rescue of personnel over open sea, tank, stretcher transport, descent and treatment of personnel after fall accident is refreshed and repeated.

The training is adapted for personnel who are part of fall protection / rescue teams on board an installation. Participants must gain expertise in risk assessment, rescue (equipment and methods) and first aid.

Covers repetition requirements every 2nd year in accordance with NOG 113 and SFS.

Content:

Introduction
Regulations
Review of accidents and incidents
The rescue service
Equipment
Routines when working at height
Risk assessment
Management, site of injury
Stress and stress management
Hanging trauma, CPR
Rescue drills
Evaluation