Course catalogue

Course goal:

This course aims to provide learners with an understanding of US best practice in relation to working with asbestos.

This course aims to provide learners with an understanding of the hazards associated with exposure to asbestos. It will also identify where asbestos may be found, how it can potentially affect your heath, and what you need to do to protect yourself from exposure. 

Learning Objectives: 

LO1 Explain what asbestos is

LO2 Describe the various types, properties and uses of asbestos 

LO3 Describe the hazards of asbestos

LO4 Identify the regulatory protective measures that should be implemented when working with asbestos

LO5 Give an overview of the health impacts of asbestos exposure

LO6 Identify areas where asbestos may still be found and describe how to identify its presence

LO7 Explain what should be considered when planning work and undertaking a risk assessment

LO8 Describe the typical procedures to deal with an emergency involving the uncontrolled release of dust containing asbestos fibers

Course Goal: This course aims to provide an introduction to the decommissioning process and an overview of the regulations governing decommissioning on the United Kingdom Continental Shelf (UKCS).

Who is the course for?

All relevant personnel

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Learning Objectives:

LO1 Give an overview of the history of oil and gas production on the United Kingdom Continental Shelf (UKCS)

LO2 Explain why decommissioning activity is increasing on the UKCS

LO3 Describe what is meant by ‘decommissioning’

LO4 Explain the scope of decommissioning on the UKCS

LO5 Provide an overview of relevant decommissioning legislation and regulations

LO6 Explain the impact of the Brent Spar incident on decommissioning regulation

LO7 Provide an overview of the OSPAR Decision 98/3

LO8 Identify the different phases of the decommissioning lifecycle

LO9 Provide a basic overview of well plugging and abandonment 

LO10 Provide an overview of the different methods of decommissioning

LO11 Provide examples of decommissioning projects on the UKCS

LO12 Give examples of the types of hazards which may be encountered during decommissioning

Who is the course for?
This eLearning course is aimed at individuals who are required to travel overseas on business, particularly to high-risk locations where there is a threat of criminal activity, civil unrest and terrorism.

Is previous experience required?
There is no requirement for prior knowledge or experience before completing this course and it is assumed that you are competent in your designated role.

How will the course benefit me?
When you travel somewhere new, your lack of local knowledge can mean that you may be more likely to be targeted by criminals. This course will give you a basic understanding of the threats commonly faced by travellers and explain how you can reduce the likelihood of a health or security incident.

The knowledge gained in this course will help you to assess your personal risk so that you can stay safe while travelling. It will also outline the basic principles of safety and security.

How will the course benefit my company?
By ensuring you are fully aware of the risks that you may face when travelling, you can keep yourself, and your company's assets and information, safe.

What standards are referenced in the course?
This course does not contain reference to specific legislation or standards but is written to current travel security guidelines and industry best practice.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%.

Course Goal:

This course aims to  provide learners with an overview of US best practice in relation to working with hand and power tools.

This course aims to provide an understanding of the potential hazards associated with the use of hand tools and power tools, as well as the safety precautions required to prevent those hazards from occurring.

Learning Objectives:

LO1 Identify the general hazards and control measures associated with hand and power tools

LO2 Identify specific hazards associated with hand tools

LO3 Give an overview of general power tool safety precautions

LO4 Explain how guards provide protection to operators

LO5 Give examples of tools that must be equipped with a momentary switch

LO6 Identify specific hazards and control measures related to the use of electric tools

LO7 Identify the proper procedures to follow when using a grinder

LO8 Identify specific hazards and control measures related to the use of pneumatic tools

LO9 Identify specific hazards and control measures related to the use of powder-actuated tools

LO10 Identify specific hazards and control measures related to the use of hydraulic jacks

Who is this course for?

Personnel requiring an awareness or understanding of US respiritory protection and RPE.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of RPE.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US RPE.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Ce cours devrait vous permettre de :

• Acquérir une meilleure compréhension des dangers associés au sulfure d'hydrogène et des mesures de détection et de protection nécessaires à mettre en place et à respecter

• Identifier les niveaux et limites légaux d'exposition professionnelle qui ont été mis en place pour votre protection

• Expliquer les responsabilités des employeurs concernant la gestion des risques associés à une exposition potentielle au sulfure d'hydrogène sur le lieu de travail

• Expliquer les devoirs des employés quant à l'observation des procedures pertinentes relatives au sulfure d'hydrogène et au suivi des recommandations fournies par les employeurs ou les propriétaires d'installation.

Who is this course for?

Oil and Gas Operations Technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of wireline equipment and its operation.

How will this course benefit my company?

To ensure you have an overview of wireline equipment and its operation.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel involved in forklift activities.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the hazards specific to forklift activities. 

How will this course benefit my company?

By ensuring you have an overview of the hazards specific to forklift activities. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of US scaffolding safety.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of scaffolding safety.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US scaffolding safety.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: 

This course provides learners with an awareness of US best practice in relation to working at height and fall protection.

Learning Objectives:

LO1 Identify when fall protection is required

LO2 Identify the legislative and regulatory requirements for fall protection that help to control work at height

LO3 Explain the duties that are placed on employers and employees

LO4 Describe the hazards involved in working at height

LO5 Explain the importance of planning and risk assessment

LO6 Describe the hierarchy of control for managing and selecting fall protection equipment 

LO7 Identify the factors that should be considered when assessing fall protection methods

LO8 Describe the main methods of access for working at height and give examples of the different types of fall protection equipment

LO9 Describe the rules for working with ladders

LO10 Describe the rules for working with scaffolds

LO11 Explain the importance of inspecting equipment

LO12 Explain how to correctly use a safety harness