Other

Course catalogue

hits
39
Course code: EBA-004
Course type: E-learning course
Duration: 1 hour 40 minutes
Language: Norwegian
Price: NOK 650,-

The course provides knowledge about the structure, operation, applications and usage, maintenance and monitoring of the appropriate tool. The training provides knowledge about the requirements for safe use and operation stipulated in regulations and instructions.

Along with a practical review of the tools, the course meets the requirements for documented training in hazardous work equipment in Regulations concerning the Performance of Work.

The course covers the following subjects:

- Introduction to general HSE
- Angle grinder
- Hammer drills, jackhammers and combihammers
- Powder actuated gun
- Nail gun
- Saws with blade (includes table saw, crosscut and miter Saw, circular saw, jigsaw and reciprocating saw)
- Chain saw

 

Course code: MTP-051-FT
Course type: E-learning course
Duration: 2 hours
Language: Norwegian / English
Price: NOK 650,-

The fast track version starts with a pre-test which checks the  participant's knowledge of FSE. Depending on the answers you give, you will get a course that is tailored to the level of knowledge that is revealed in the pretest.

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

The course with fast track is suitable for for all, but is particularly practical for those who are going to do refresher training in FSE. The version without fast track is to be found in the course catalogue with the code MTP-051.

Course code: AAK-006
Course type: E-learning course
Duration: 1 hour 5 minutes
Language: English, Norwegian
Price: NOK 1300,-

This course is aimed at people who want to refresh their competence in connection with how to select and use fall protection equipment.

Throughout the course the participants will actively select equipment and methods and thereby gain a better understanding of correct use of fall protection equipment.

The course gives, among other things, an introduction to key requirements for employers regarding the use of fall protection equipment. The course is therefore well suited for anyone with HSE responsibilities during planning or performing work at height.

 

Course Content

- Requirements for employers 

- Safety work and level of protection 

- Selecting methods 

- Selecting equipment 

- Correct use 

- Inspection and maintenance

Course code: NI-019
Course type: E-learning course
Duration: 1 hour
Language: English
Price: NOK 1300,-

This course is both for those who compile and those who use safety data sheets. The course provides general knowledge of how you compile and read a data sheet. Participants get updated on new requirements.

Course code: APP-010
Course type: E-learning course
Duration: 3 hours
Language: Polish
Price: NOK 650,-

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations offshore.

 

The course also provides first-aid instruction and training. CPR training must be completed separately.

 

In accordance with section 7 of FSE, FSE and and first-aid training must be completed at least once a year. In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

 

This course addresses a variety of issues and covers how to prevent electrical accidents, routines in the event of accidents, and theoretical first aid, and aims to help prevent harm to people, equipment, and installations.

Course code: MTP-056
Course type: E-learning course
Duration: 20 minutes
Language: Norwegian / English
Price: NOK 550,-

The main idea behind the course is that knowledge about and reflection on what to do makes us feel more confident and able to make informed choices.  In a public area or at work, are you aware of what the premises look like, and how you can evacuate if a situation should occur? In order of priority you should act in this way; Run, Hide, Fight!

The course describes these guidelines in more details and also allows the user to reflect upon various aspects of an armed attack.

Course code: EBA-006
Course type: E-learning course
Duration: 1 time 40 minutter
Language: Polsk
Price: NOK 650,-

The course provides knowledge about the structure, operation, applications and usage, maintenance and monitoring of the appropriate tool. The training provides knowledge about the requirements for safe use and operation stipulated in regulations and instructions.

Along with a practical review of the tools, the course meets the requirements for documented training in hazardous work equipment in Regulations concerning the Performance of Work.

The course covers the following subjects:

- Introduction to general HSE
- Angle grinder
- Hammer drills, jackhammers and combihammers
- Powder actuated gun
- Nail gun
- Saws with blade (includes table saw, crosscut and miter Saw, circular saw, jigsaw and reciprocating saw)
- Chain saw

Course code: MTP-048
Course type: E-learning course
Duration: 2 hours
Language: Norwegian / English
Price: NOK 650,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-048-FT.

Course code: MTP-047
Course type: E-learning course
Duration: 2 hours 30 minutes
Language: Norwegian / English
Price: NOK 1150,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-047-FT.

Course code: EBA-003
Course type: E-learning course
Duration: 50 minutes
Language: Polish
Price: NOK 450,-

The course is a management support and provides an introduction to Risk assessment, HSE regulations and Training requirements. The course is also helpful for everyone involved in the training of hazardous work equipment.
The course is intended to give participants an introduction to the HSE regulations, and requirements for training, especially relating to dangerous tools.

Course code: MTP-049
Course type: E-learning course
Duration: 2 hours
Language: Norwegian / English
Price: NOK 650,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-049-FT.

Course code: MTP-049-FT
Course type: E-learning course
Duration: 2 hours
Language: Norwegian
Price: NOK 650,-

The fast track version starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers you give, you will get a course that is tailored to the level of knowledge that is revealed in the pre-test.

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

The course with fast track is suitable for for all, but is particularly practical for those who are going to do refresher training in FSE. The version without fast track is to be found in the course catalogue with the code MTP-049.

Course code: EXT-005
Course type: E-learning course
Duration: 5-hour e-learning
Language: English, Norwegian
Price: NOK 6200,-

The concept intrinsic safety is unlike the other Ex protection concepts as it is a system concept. Therefore, it is necessary to understand the system as a whole, how the environment and individual components affect the system to maintain the integrity of the intrinsically safe system.

Exi protection concepts – Ex ia, Ex ib, Ex ic and Ex nL
Exi components in Ex zone and unclassified area.
Exi verification and documentation
Exi installation and inspection


Legislation & references

- NEK 420
- NEK EN 60079-11
- NEK EN 60079-14
- NEK EN 60079-25

Course code: APP-006
Course type: E-learning course
Duration: 3 hours
Language: Polish
Price: NOK 650,-

This e-learning course covers the requirements for training for those working in high voltage offshore.

 

Course code: PRO-010
Course type: E-learning course
Duration: Not set
Language: English
Price: NOK 3500,-

As of 01 January 2006, the Working Environment Act, section 3-5, requires employers to complete HSE training. This means that all company executives and managers with responsibility for personnel must have a fundamental understanding of the basic principles of systematic health, safety and environment work, and of the Working Environment Act itself. This course satisfies legislated requirements for HSE training for managers.

Course code: EBA-002
Course type: E-learning course
Duration: 50 minutes
Language: English
Price: NOK 450,-

The course is a management support and provides an introduction to Risk assessment, HSE regulations and Training requirements. The course is also helpful for everyone involved in the training of hazardous work equipment.
The course is intended to give participants an introduction to the HSE regulations, and requirements for training, especially relating to dangerous tools.

Course code: EBA-005
Course type: E-learning course
Duration: 1 hour 40 minutes
Language: English
Price: NOK 650,-

The course provides knowledge about the structure, operation, applications and usage, maintenance and monitoring of the appropriate tool;. The training provides knowledge about the requirements for safe use and operation stipulated in regulations and instructions. Norway The course is divided into an introduction and one course element per tool. The implementation can be divided up. Please feel free to take 1-2 tools at a time with a break in between. Norway NB! Along with a practical review of the tools, the course meets the requirements for documented training in hazardous work equipment in Regulations concerning the Performance of Work.

Course code: LSI-003
Course type: E-learning course
Duration: 3 hours
Language: Norwegian
Price: NOK 990,-
Course code: APP-004
Course type: E-learning course
Duration: 3 hours
Language: Polish
Price: NOK 650,-

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on high voltage installations.

 

Hits per page