Other

Course catalogue

hits
192
Course code: MTP-004
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English, Norwegian
Price: NOK 1350,-

The course is for all those who work with or may come in contact with chemicals, and is also intended for those who may be dealing with workplace environment issues, purchasing, or transportation. The E-learning course will give the target group fundamental knowledge of safe use of chemicals.

 

The course educates participants in the handling of chemicals so that chemicals are used responsibly and in accordance with requirements laid down by the relevant authorities in relation to this work.


Course Content

- Mapping
- Classification and labelling
- Safety datasheet and substances and chemicals registers
- Exposure
- Risk assessment
- Protective equipment
- First aid

Course code: MTP-066
Course type: E-learning course
Duration: 10 minutes
Language: English and Norwegian
Price: NOK 250,-

This course is designed to raise the awareness of GDPR (2018) throughout the workforce.

We will familiarise staff with the rights of individuals and the obligations of companies.

Learn which territorial areas are affected, and understand the consequences of the improper sharing of personal data, and how to deal with a data breach, should it occur.

The course content is developed in cooperation with Advokatfirmaet Schjødt AS.

 

Course code: MTP-015
Course type: E-learning course
Duration: 15 minutes
Language: English, Norwegian
Price: NOK 750,-

An introduction to ergonomics in the workplace, especially offshore related work. The course looks at correct working techniques, what makes a good working environment, what measures that helps, and who is responsible for maintaining good ergonomic conditions in the workplace.

 

Course Content

- Introduction 

- Correct working techniques 

- Environment 

- Measures that help 

- Responsibility and implementation

Course code: MTP-016
Course type: E-learning course
Duration: 4 hours
Language: English, Polish, Norwe ...
Price: NOK 1200,-

The e-learning course, “Fire Prevention during Hot Work”, has been quality controlled by the Norwegian Fire Prevention Association and designed is to satisfy the requirements set by the insurance industry.

The course aims to reduce the number of fires caused by hot work and improve knowledge about the risk of fire during hot work.

Please Note! Before we can inform the Norwegian Fire Prevention Association that you have completed the course, we must receive within 3 months of completing the e-learning a confirmation that you have received fire extinguishing training during the last two years. Please send the proof of the practical training to: support@mintragroup.com  

Participants who pass the course will be issued a certificate from the Norwegian Fire Prevention Association. The certificate must be renewed every 5 years.

Course Contents

The course focuses on duties and responsibilities during hot work and is divided into the following topics: 

- Hot work
- Regulations
- Fire theory
- Extinguishing fires
- Dangers of hot work
- Risk identification and preventive measures
- Documentation of safety
- If a fire starts

 

Course code: MTP-063-FT
Course type: E-learning course
Duration: Approx. 2 hours
Language: English, Norwegian
Price: NOK 1150,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about acquiring knowledge about the regulations, but it is equally important for the individual to understand why we have these regulations. It is crucial to succeed in getting the individual to understand the importance of working safely, so that the electrical safety develops in the right direction and that the number of accidents is reduced.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. The version without fast track may be found in the course catalogue with the course name FSE High and Low Voltage and course code MTP-063.

Course code: MTP-059
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian
Price: NOK 500,-

The course will make you aware of aspects relating to anti-corruption and anti-bribery and will familiarize you with the relevant legislation. During the course you will encounter common dilemmas where you will be asked to make your own decisions. The feedback in the exercises will enable you to handle various questions and tricky situations.

Course code: NI-001
Course type: E-learning course
Duration: 15 hours
Language: Norwegian / English
Price: NOK 3400,-

Obligatory working environment training for safety deputies and union officials, completed as e-learning combined with classroom training. 

The course provides basic working environment training in accordance with the main contract between The Norwegian Confederation of Trade Unions (LO) and The Confederation of Norwegian Enterprise (NHO).

 

Course Content

E-learning

Interactive exercise sequences, video clips, and animations are used to illustrate the topics.

The course provides insight into why HSE work is important, using The Working Environment Act as a tool.

Knowledge of roles and responsibilities in relation to the working environment.

Using systematic methods for improving the working environment and for solving working environment issues.

 

Classroom Training

This internal company gathering can be conducted and organised by the company itself, or in collaboration with Mintra/The Federation of Norwegian Industries. If you would like Mintra/The Federation of Norwegian Industries to conduct the training, a minimum of 10 people must be enrolled.

 

If your company would prefer to conduct the training, relating content to internal routines and conditions, Mintra will contribute with documentation and information that describe activities related to this training. 

Contact us to find a suitable implementation model!

Course code: MTP-067
Course type: E-learning course
Duration: 30 minutes
Language: English and Norwegian
Price: NOK 400,-

 

This course is designed to raise awareness of how organisations, and all employees in contact with personal data are affected by GDPR Legislation (2018).

The course gives an overview of definitions, roles and responsibilities, the rights of individuals and the obligations of businesses with respect to the regulation.

We examine the territorial scope and outline the general requirements, technical solutions and administrative routines required for GDPR compliance, whilst also examining how to handle the issues surrounding a data breach, should it occur.

The course content is developed in cooperation with Advokatfirmaet Schjødt AS.

 

 

Course code: MTP-063
Course type: E-learning course
Duration: Approx. 2 hours
Language: English, Norwegian
Price: NOK 1150,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR). 

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about acquiring knowledge about the regulations, but it is equally important for the individual to understand why we have these regulations. It is crucial to succeed in getting the individual to understand the importance of working safely, so that the electrical safety develops in the right direction and that the number of accidents is reduced. 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the course name FSE High and Low Voltage (fast track) and course code MTP-063-FT.

Course code: MUK-199
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 40,-

Course Goal: 

This course aims to provide learners of an awareness of US best practice in relation to minimizing exposure to bloodborne pathogens in the workplace.

This course aims to provide you with an awareness of bloodborne pathogens, common modes of transmission, methods of prevention, and what to do if exposure occurs. 

 

Learning Objectives:

 

LO1 Define what is meant by the term ‘bloodborne pathogens’

LO2 Identify the traits and symptoms of Hepatitis B

LO3  Identify the traits and symptoms of HIV 

LO4 Identify modes of transmission for bloodborne pathogens

LO5  Explain the purpose of an Exposure Control Plan

LO6 Give examples of preventive control measures that can reduce or eliminate exposure

LO7  Give an overview of the proper usage and handling of personal protective equipment

LO8  Describe decontamination best practice for blood and other potentially infectious materials

LO9  Describe the actions to take if an exposure incident occurs

LO10  Identify the measures to be taken if the skin or eyes are exposed to infectious material

Course code: MTP-055
Course type: E-learning course
Duration: 45 minutes
Language: Norwegian and english
Price: NOK 500,-

The course covers the government requirements on theoretical training for personnel who may undertake simple operational and maintenance tasks on the electrical system.

The course focuses on preventing accidents and to be aware of the dangers of working with electricity. 

The theoretical part of First Aid and instructions are covered, but it is necessary to undertake practical training both in First Aid and the work tasks covered by the instructions in relation to the electrical installation where you are to work.

Course code: MTP-064-FT
Course type: E-learning course
Duration: Approx. 2 hours
Language: English, Norwegian
Price: NOK 650,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR). 

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.  

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about acquiring knowledge about the regulations, but it is equally important for the individual to understand why we have these regulations. It is crucial to succeed in getting the individual to understand the importance of working safely, so that the electrical safety develops in the right direction and that the number of accidents is reduced. 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

The version without fast track may be found in the course catalogue with the course name FSE Low Voltage and course code MTP-064.

Course code: MUK-207
Course type: E-learning course
Duration: 30 minutes
Language: English (US)
Price: GBP 40,-

Course Goal:

This course aims to provide an overview of US best practice in relation to the classification and labeling of chemicals.

 

Learning Objectives:

LO1 Give an overview of the purpose and goals of the OSHA requirements for the classification and labeling of chemicals

LO2 Explain physical, health, and environmental hazards

LO3 Give an overview of the information that may be contained on a chemical label

LO4 Identify the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) pictograms

LO5 Identify the differences between transport pictograms and GHS pictograms

LO6 Describe hazard statements, precautionary statements and signal words

LO7 Explain the purpose of Safety Data Sheets

LO8 Give an overview of the information that may be contained on a Safety Data Sheet

LO9 Identify that not all chemicals will have a Safety Data Sheet

 

Course code: MTP-038
Course type: E-learning course
Duration: 45 minutes
Language: English, Norwegian
Price: NOK 1100,-

Insufficient understanding of risk often leads to delayed projects, accidents and other unwanted incidents.
This course provides a basic understanding of what risk is, how it can be managed and how understanding risk helps us make better decisions.

 

Course Content
- What is risk?
- Managing risk
- That we each play a role in preventing things from going wrong
- That actions and decisions may influence the risk to ourselves and others far into the future
- That we perform risk assessments in order to make better decisions when we are unsure

 

Course code: MGM-007
Course type: E-learning course
Duration: 40 minutes
Language: English
Price: NOK 600,-

Course Goal: This course aims to provide learners with an introduction to cyber-security and cyber-risks, and how by improving personal awareness of cyber-risks can improve cyber-security overall.

 

Learning Objectives:

- Describe the term cyber-security and recognise how cyber-security starts with “you”

- Explain the threat of cyber-crime and the possible outcomes of an attack

- Describe cyber-security laws and regulations

- Describe possible cyber-threats

- Describe best practices to reduce cyber-risk

Course code: MTP-061
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian
Price: NOK 500,-

The Code of Conduct course provides an overview of the common values that govern responsible corporate practice and personal behaviour in a company. The course will identify the responsibilities of employees and our common responsibilities toward each other in the workplace. You will learn about applicable laws on human rights, equality, discrimination and corruption. During the course, you will be asked to make your own decisions in relevant dilemmas involving sexual harassment, bullying, discrimination and corruption.

Course code: NI-010
Course type: E-learning course
Duration: 5 hours
Language: Norwegian / English
Price: NOK 1800,-

The Working Environment Act, section 3-5, obligates employers and executives to complete HSE training. This course satisfies the requirements for HSE training for executives and managers.

The course contains the following modules: 

• A working life changing

• The Working Environment Act

• Risk Managament

• Healthy enough to work?

• Systematic HSE work

 

Course code: MTP-006
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 1350,-

Health, Safety and Environment (HSE) considerations are vital to every enterprise. Moreover, HSE requirements in the workplace are laid down in a whole range of laws, regulations and guidelines. The employer has the primary responsibility for providing a suitable, safe working environment – and for ensuring sufficient training. This “HSE Introduction” provides you with the basic knowledge you need to know to be able to deal with HSE challenges in your daily work.

Content:

Introduction to HSE - duration ca. 35 minutes.
Health - duration ca.  55 minutes.
Environment - duration ca. 15 minutes.
Safety - duration ca. 25 minutes.

The modules may be completed in any order. If you close the course window, it will reopen on the same page next time. After completing all the modules, you must pass the final test to have your course completion approved.

Course code: MTP-062
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian
Price: NOK 500,-

This course provides an overview of common corporate sustainability approaches and identifies the social, environmental and corporate governance aspects that should be considered during business operations. The course also identifies the human rights that are at risk of infringement in the work environment, and you will be aware of the global presence of modern-day slavery. During the course, you will be asked to make your own decisions in relevant dilemmas involving environmental criminality, corruption and breaches of labour rights.

Course code: MTP-064
Course type: E-learning course
Duration: Approx. 2 hours
Language: English, Norwegian
Price: NOK 650,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR). 

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.  

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about acquiring knowledge about the regulations, but it is equally important for the individual to understand why we have these regulations. It is crucial to succeed in getting the individual to understand the importance of working safely, so that the electrical safety develops in the right direction and that the number of accidents is reduced. 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the course name FSE Low Voltage (fast track) and course code MTP-064-FT.

Hits per page