Other

Course catalogue

hits
16
Course code: MTP-004
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English, Norwegian
Price: NOK 1350,-

The course is for all those who work with or may come in contact with chemicals, and is also intended for those who may be dealing with workplace environment issues, purchasing, or transportation. The E-learning course will give the target group fundamental knowledge of safe use of chemicals.

 

The course educates participants in the handling of chemicals so that chemicals are used responsibly and in accordance with requirements laid down by the relevant authorities in relation to this work.


Course Content

- Mapping
- Classification and labelling
- Safety datasheet and substances and chemicals registers
- Exposure
- Risk assessment
- Protective equipment
- First aid

Course code: MTP-016
Course type: E-learning course
Duration: 4 hours
Language: Norwegian, Polish, Eng ...
Price: NOK 1200,-

The e-learning course, “Fire Prevention during Hot Work”, has been quality controlled by the Norwegian Fire Prevention Association and designed is to satisfy the requirements set by the insurance industry.

 

The course aims to reduce the number of fires caused by hot work and improve knowledge about the risk of fire during hot work.

 

NB! Before we can inform the Norwegian Fire Prevention Association that you have completed the course, we must have confirmation that you have received fire extinguishing training during the last two years.

 

Participants who pass the exam will be issued a certificate from the Norwegian Fire Prevention Association. The certificate must be renewed every 5 years.

 

Course Content

The course focuses on duties and responsibilities during hot work and is divided into the following topics: 

- What is Hot Work?

- Fire Theory

- Your Responsibilities

- Before Hot Work

- During Hot Work

- After Hot Work

- What Do You Do in Case of Fire?

- Fire Extinguishing Equipment and Methods

Course code: MTP-015
Course type: E-learning course
Duration: 15 minutes
Language: English, Norwegian
Price: NOK 750,-

An introduction to ergonomics in the workplace, especially offshore related work. The course looks at correct working techniques, what makes a good working environment, what measures that helps, and who is responsible for maintaining good ergonomic conditions in the workplace.

 

Course Content

- Introduction 

- Correct working techniques 

- Environment 

- Measures that help 

- Responsibility and implementation

Course code: MTP-038
Course type: E-learning course
Duration: 45 minutes
Language: English, Norwegian
Price: NOK 1100,-

Insufficient understanding of risk often leads to delayed projects, accidents and other unwanted incidents.
This course provides a basic understanding of what risk is, how it can be managed and how understanding risk helps us make better decisions.

 

Course Content
- What is risk?
- Managing risk
- That we each play a role in preventing things from going wrong
- That actions and decisions may influence the risk to ourselves and others far into the future
- That we perform risk assessments in order to make better decisions when we are unsure

 

Course code: MTP-027
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian
Price: NOK 750,-

The employer holds the responsibility for creating a good work environment, but this also requires significant contribution by the employees.

The course “Office Ergonomics” provides common knowledge and skills regarding ergonomics to employer and employee. With a common understanding, systematic work on identifying and solving work environment issues can begin.

 

Course Content

- Introduction 

- General ergonomics 

- Office ergonomics

Course code: MTP-006
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 1350,-

Health, Safety and Environment (HSE) considerations are vital to every enterprise. Moreover, HSE requirements in the workplace are laid down in a whole range of laws, regulations and guidelines. The employer has the primary responsibility for providing a suitable, safe working environment – and for ensuring sufficient training. This “HSE Introduction” provides you with the basic knowledge you need to know to be able to deal with HSE challenges in your daily work.

Content:

Introduction to HSE - duration ca. 35 minutes.
Health - duration ca.  55 minutes.
Environment - duration ca. 15 minutes.
Safety - duration ca. 25 minutes.

The modules may be completed in any order. If you close the course window, it will reopen on the same page next time. After completing all the modules, you must pass the final test to have your course completion approved.

Course code: MTP-052
Course type: E-learning course
Duration: 2 hours
Language: Norwegian / English
Price: NOK 650,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-052-FT.

Course code: MTP-055
Course type: E-learning course
Duration: 45 minutes
Language: Norwegian and english
Price: NOK 500,-

The course covers the government requirements on theoretical training for personnel who may undertake simple operational and maintenance tasks on the electrical system.

The course focuses on preventing accidents and to be aware of the dangers of working with electricity. 

The theoretical part of First Aid and instructions are covered, but it is necessary to undertake practical training both in First Aid and the work tasks covered by the instructions in relation to the electrical installation where you are to work.

Course code: MTP-052-FT
Course type: E-learning course
Duration: 2 hours
Language: Norwegian / English
Price: NOK 650,-

The fast track version starts with a pre-test which checks the  participant's knowledge of FSE. Depending on the answers you give, you will get a course that is tailored to the level of knowledge that is revealed in the pretest.


The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

The course with fast track is suitable for for all, but is particularly practical for those who are going to do refresher training in FSE. The version without fast track is to be found in the course catalogue with the code MTP-052.

Course code: MTP-058
Course type: E-learning course
Duration: 1 hour 10 minutes
Language: English / Norwegian
Price: NOK 2100,-

This course is approved by the Norwegian Maritime Authority (NMA).

This course will be a part of a blended learning in two stages:

-    The first stage is this e-learning course
-    The second stage will be on board training reflecting the realities on-board the vessel you are serving on. This training might take a couple of weeks or more to complete, as you will be required to participate in a number of drills.

The training will be complete when all the elements of the checklist pertaining to your designated security duties.

Contact Mintra for more information about how to complete this training.

Course code: MTP-024
Course type: E-learning course
Duration: 1 hour
Language: Norwegian
Price: NOK 500,-

This course provides an introduction to emergency first aid. After completing the course, users will feel secure enough in their knowledge to be able to take action in an accident situation by analyzing the situation and understanding the order in which to do what needs to be done.

 

Course Content

- Introduction

- Lifesaving first aid
- To call for help
- The important survey
- Stroke
- Cardiac Resuscitation
- Heart Disease
- Internal and external bleeding

Course code: MTP-015
Course type: E-learning course
Duration: Not set
Language: Not set
Price: NOK 750,-

An introduction to important ergonomic principles applied both at the office and offshore.

Course code: MTP-051-FT
Course type: E-learning course
Duration: 2 hours
Language: Norwegian / English
Price: NOK 650,-

The fast track version starts with a pre-test which checks the  participant's knowledge of FSE. Depending on the answers you give, you will get a course that is tailored to the level of knowledge that is revealed in the pretest.

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

The course with fast track is suitable for for all, but is particularly practical for those who are going to do refresher training in FSE. The version without fast track is to be found in the course catalogue with the code MTP-051.

Course code: MTP-056
Course type: E-learning course
Duration: 20 minutes
Language: Norwegian / English
Price: NOK 550,-

The main idea behind the course is that knowledge about and reflection on what to do makes us feel more confident and able to make informed choices.  In a public area or at work, are you aware of what the premises look like, and how you can evacuate if a situation should occur? In order of priority you should act in this way; Run, Hide, Fight!

The course describes these guidelines in more details and also allows the user to reflect upon various aspects of an armed attack.

Course code: MTP-016
Course type: E-learning course
Duration: 2 hours
Language: English, Polish, Norwe ...
Price: NOK 1200,-

The e-learning course, “Fire Prevention during Hot Work”, has been quality controlled by the Norwegian Fire Prevention Association and designed is to satisfy the requirements set by the insurance industry.

The course aims to reduce the number of fires caused by hot work and improve knowledge about the risk of fire during hot work.

NB! Before we can inform the Norwegian Fire Prevention Association that you have completed the course, we must have confirmation that you have received fire extinguishing training during the last two years.

Participants who pass the exam will be issued a certificate from the Norwegian Fire Prevention Association. The certificate must be renewed every 5 years.

Course Contents

The course focuses on duties and responsibilities during hot work and is divided into the following topics: 

- What is Hot Work?

- Fire Theory

- Your Responsibilities

- Before Hot Work

- During Hot Work

- After Hot Work

- What Do You Do in Case of Fire?

- Fire Extinguishing Equipment and Methods

Course code: PRO-010
Course type: E-learning course
Duration: Not set
Language: English
Price: NOK 3500,-

As of 01 January 2006, the Working Environment Act, section 3-5, requires employers to complete HSE training. This means that all company executives and managers with responsibility for personnel must have a fundamental understanding of the basic principles of systematic health, safety and environment work, and of the Working Environment Act itself. This course satisfies legislated requirements for HSE training for managers.

Hits per page