Other

Course catalogue

hits
134
Course code: MTP-004
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English, Norwegian
Price: NOK 1350,-

The course is for all those who work with or may come in contact with chemicals, and is also intended for those who may be dealing with workplace environment issues, purchasing, or transportation. The E-learning course will give the target group fundamental knowledge of safe use of chemicals.

 

The course educates participants in the handling of chemicals so that chemicals are used responsibly and in accordance with requirements laid down by the relevant authorities in relation to this work.


Course Content

- Mapping
- Classification and labelling
- Safety datasheet and substances and chemicals registers
- Exposure
- Risk assessment
- Protective equipment
- First aid

Course code: MTP-016
Course type: E-learning course
Duration: 4 hours
Language: Norwegian, Polish, Eng ...
Price: NOK 1200,-

The e-learning course, “Fire Prevention during Hot Work”, has been quality controlled by the Norwegian Fire Prevention Association and designed is to satisfy the requirements set by the insurance industry.

 

The course aims to reduce the number of fires caused by hot work and improve knowledge about the risk of fire during hot work.

 

NB! Before we can inform the Norwegian Fire Prevention Association that you have completed the course, we must have confirmation that you have received fire extinguishing training during the last two years.

 

Participants who pass the exam will be issued a certificate from the Norwegian Fire Prevention Association. The certificate must be renewed every 5 years.

 

Course Content

The course focuses on duties and responsibilities during hot work and is divided into the following topics: 

- What is Hot Work?

- Fire Theory

- Your Responsibilities

- Before Hot Work

- During Hot Work

- After Hot Work

- What Do You Do in Case of Fire?

- Fire Extinguishing Equipment and Methods

Course code: MTP-015
Course type: E-learning course
Duration: 15 minutes
Language: English, Norwegian
Price: NOK 750,-

An introduction to ergonomics in the workplace, especially offshore related work. The course looks at correct working techniques, what makes a good working environment, what measures that helps, and who is responsible for maintaining good ergonomic conditions in the workplace.

 

Course Content

- Introduction 

- Correct working techniques 

- Environment 

- Measures that help 

- Responsibility and implementation

Course code: NI-001
Course type: E-learning course
Duration: 15 hours
Language: Norwegian / English
Price: NOK 3400,-

Obligatory working environment training for safety deputies and union officials, completed as e-learning combined with classroom training. 

The course provides basic working environment training in accordance with the main contract between The Norwegian Confederation of Trade Unions (LO) and The Confederation of Norwegian Enterprise (NHO).

 

Course Content

E-learning

Interactive exercise sequences, video clips, and animations are used to illustrate the topics.

The course provides insight into why HSE work is important, using The Working Environment Act as a tool.

Knowledge of roles and responsibilities in relation to the working environment.

Using systematic methods for improving the working environment and for solving working environment issues.

 

Classroom Training

This internal company gathering can be conducted and organised by the company itself, or in collaboration with Mintra/The Federation of Norwegian Industries. If you would like Mintra/The Federation of Norwegian Industries to conduct the training, a minimum of 10 people must be enrolled.

 

If your company would prefer to conduct the training, relating content to internal routines and conditions, Mintra will contribute with documentation and information that describe activities related to this training. 

Contact us to find a suitable implementation model!

Course code: MTP-053
Course type: E-learning course
Duration: 2,5-3 hours
Language: Norwegian / English
Price: NOK 4200,-


The course content is designed to satisfy the requirement concerning competence in relation to the regulations by providing knowledge of the HSE regulations structure and content and giving examples of practical use.

Course contents:

•    About the regulations
•    Structure
•    Acts
•    Regulations
•    Selected issues
•    The Petroleum Safety Authority Norway
•    Practical use

When working through the course, it is a good idea to remain on the net so you can make active use of the regulations. That way you will benefit most from the course.

In order to have the course approved, you must answer 80% of the questions in the test correctly. The test is made available after you have completed the course.

A great deal of the course content has been imported from Lovdata and the Petroleum Safety Authority website.

The regulations are readily available on the internet:
www.lovdata.no
www.psa.no

Proactima offers following collections in drilling/well , compliance/culture, development projects/modifications and more on request. Contact learning@proactima.com

Course code: MTP-038
Course type: E-learning course
Duration: 45 minutes
Language: English, Norwegian
Price: NOK 1100,-

Insufficient understanding of risk often leads to delayed projects, accidents and other unwanted incidents.
This course provides a basic understanding of what risk is, how it can be managed and how understanding risk helps us make better decisions.

 

Course Content
- What is risk?
- Managing risk
- That we each play a role in preventing things from going wrong
- That actions and decisions may influence the risk to ourselves and others far into the future
- That we perform risk assessments in order to make better decisions when we are unsure

 

Course code: MTP-027
Course type: E-learning course
Duration: 30 minutes
Language: Norwegian
Price: NOK 750,-

The employer holds the responsibility for creating a good work environment, but this also requires significant contribution by the employees.

The course “Office Ergonomics” provides common knowledge and skills regarding ergonomics to employer and employee. With a common understanding, systematic work on identifying and solving work environment issues can begin.

 

Course Content

- Introduction 

- General ergonomics 

- Office ergonomics

Course code: NI-010
Course type: E-learning course
Duration: 5 hours
Language: Norwegian / English
Price: NOK 1800,-

The Working Environment Act, section 3-5, obligates employers and executives to complete HSE training. This course satisfies the requirements for HSE training for executives and managers.

The course contains the following modules: 

• A working life changing

• The Working Environment Act

• Risk Managament

• Healthy enough to work?

• Systematic HSE work

 

Course code: PRO-016
Course type: E-learning course
Duration: 4-6 hours
Language: Norwegian
Price: NOK 4500,-

For the english version of this course please enrol to the course "Basic Risk Analysis".

Risk has always been an important part of our lives. People have always tried to get an overview of what risks are linked to different activities. Nowadays, risk management is a core concept in many different contexts – for example, we talk about a business risk or a risk of injury or loss of life.

In this course, the main focus is on what we usually call risk-based HSE management, but the course also throws light on principles and methods which can be used generally for risk management in business.
There are many guides and standards concerning how a risk analysis may be performed, and many of these are adapted to specific industries and specialized areas. This course offers a general approach to the risk management process, without a pronounced sector-based content.

Following completion of the module, participants will have a better understanding of what risk management is and be familiar with the various phases of the risk management process. At the same time, the participants will come to understand why risk forms a core part of all human activity. This will be done by means of learning and reflection on such key topics as: 

• Basic principles of risk-based management
• What is risk?
• How to include risk management in the other activities of the business

 

Course content 
• Introduction to risk management
• The risk management process
• Risk analysis
• Risk analysis methods
• Acceptance and decision criteria
• Risk identification
• Frequency
• Impact assessments
• Risk assessment and outcome
• Cost-benefit assessments
• Measures and follow-up
• Management – drilling and well operations
• Management – emergency preparedness
• Management – health and working environment
• Management – external environment

The course can also be offered in combination with a classroom session. Contact us for a tailormade solution for your company.

Course code: MTP-006
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 1350,-

Health, Safety and Environment (HSE) considerations are vital to every enterprise. Moreover, HSE requirements in the workplace are laid down in a whole range of laws, regulations and guidelines. The employer has the primary responsibility for providing a suitable, safe working environment – and for ensuring sufficient training. This “HSE Introduction” provides you with the basic knowledge you need to know to be able to deal with HSE challenges in your daily work.

Content:

Introduction to HSE - duration ca. 35 minutes.
Health - duration ca.  55 minutes.
Environment - duration ca. 15 minutes.
Safety - duration ca. 25 minutes.

The modules may be completed in any order. If you close the course window, it will reopen on the same page next time. After completing all the modules, you must pass the final test to have your course completion approved.

Course code: MTP-052
Course type: E-learning course
Duration: 2 hours
Language: Norwegian / English
Price: NOK 650,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-052-FT.

Course code: DP-1702
Course type: E-learning course
Duration: 7 hours
Language: Norwegian
Price: NOK 450,-

This course provides thorough training to help you work smarter and more efficiently with Excel. You will learn everything from the basics, such as, editing, formatting, formulas and printing, to more advanced topics. This course has been approved by Datakortet AS (Ltd.), and is in line with the content of Module 4 - Spreadsheets, in Datakortet's 4.0 Curriculum.

 

Course Content
- Introduction to Excel
- Editing
- Formulas
- Formatting
- Functions
- Diagram
- Multiple spreadsheets
- Images and objects
- Lists and tables
- Printing
- Internet and distribution
Course code: DP-2000
Course type: E-learning course
Duration: 7 hours
Language: Norwegian
Price: NOK 450,-

Only in Norwegian

Kurset gir en praktisk opplæring i Excel 2010. En kombinasjon av videoer, teori, oppskrifter, oppgaver og tester gjør det enkelt å lære seg de nye "smarte" funksjonene. Kurset inneholder over 50 ulike opplæringsvideoer.
Backstage-visning inneholder alle filrelaterte funksjoner. Autofyll forenkler arbeidet med å fylle inn data. Formler og funksjoner utfører beregninger raskt. Med betinget formatering kan du følge sentrale verdier i regnearket. Cellestiler gjør formateringen mer konsekvent. Diagram gir en visuell framstilling av tallverdier. Sparkline-grafikk kan brukes for å visualisere data direkte i regnearkceller. Nytt integrert utskriftsmiljø med både utskriftsinnstillinger og forhåndsvisning.

 

Kursinnhold

- Bli kjent med Excel 

- Redigering 

- Formler

- Formatering 

- Funksjoner 

- Diagram 

- Flere regneark 

- Lister og tabeller 

- Utskrift

Course code: MTP-050
Course type: E-learning course
Duration: 2 hours 30 minutes
Language: Norwegian / English
Price: NOK 1150,-

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the code MTP-050-FT.

Course code: MTP-055
Course type: E-learning course
Duration: 45 minutes
Language: Norwegian and english
Price: NOK 500,-

The course covers the government requirements on theoretical training for personnel who may undertake simple operational and maintenance tasks on the electrical system.

The course focuses on preventing accidents and to be aware of the dangers of working with electricity. 

The theoretical part of First Aid and instructions are covered, but it is necessary to undertake practical training both in First Aid and the work tasks covered by the instructions in relation to the electrical installation where you are to work.

Course code: DP-2020
Course type: E-learning course
Duration: 3 hours
Language: Norwegian
Price: NOK 295,-

This course is available in Norwegian only.

Kurset viser aktuelle funksjoner og muligheter i det nye kommunikasjons¬programmet Lync 2010. En kombinasjon av videoer, teori og oppskrifter gjør det enkelt å lære seg å kommunisere og samarbeide interaktivt med kolleger og andre kontakter. Kurset inneholder 28 opplæringsvideoer.

 

Kommuniser enkelt med kontakter og kolleger både internt og eksternt. Få oversikt over hvilke kontakter som er tilgjengelige og hvilke som ikke kan nås. Benytt både tale og video direkte fra Lync. Bruk grupper for å kontakte og dele informasjon med flere kontakter samtidig. Kontaktene kan nås ved hjelp av både e-post, direktemelding og anrop. Planlegg elektroniske møter fra Outlook og kjør dem via Lync. Del skrivebordet, programmer, PowerPoint-presentasjoner eller en virtuell tavle med andre.

 

Kursinnhold

- Oppstart og tilpasning

- Kontakter

- Kommunikasjon

- Elektroniske møter

- Deling og samarbeid

Course code: MTP-025
Course type: E-learning course
Duration: 45 minutes
Language: Norwegian
Price: NOK 1250,-

Mintra Publisher is an authoring tool for effective e-learning production. "Introducing Mintra Publisher" is the course for you if you are planning to use the tool. Please notice that the course is only available in the Norwegian language.

Course code: DP-1701
Course type: E-learning course
Duration: 7 hours
Language: Norwegian
Price: NOK 450,-

This course provides thorough training to help you work smarter and more efficiently with word. You will learn everything from the basics, such as, editing, formatting, final touches and printing, to more advanced topics. This course has been approved by Datakortet AS (Ltd.), and is in line with the content of Module 3 - Word Processing, in Datakortet's 4.0 Curriculum.

 

Course Content

- Introduction to Word

- Editing

- Formatting

- Page formatting

- Language tools

- Printing

- Tables

- Images and objects

- Mail merge

- Internet and distribution

Course code: EBA-001
Course type: E-learning course
Duration: 50 minutes
Language: Norwegian
Price: NOK 450,-

The course is a management support and provides an introduction to Risk assessment, HSE regulations and Training requirements. The course is also helpful for everyone involved in the training of hazardous work equipment.
The course is intended to give participants an introduction to the HSE regulations, and requirements for training, especially relating to dangerous tools.

Course code: MTP-052-FT
Course type: E-learning course
Duration: 2 hours
Language: Norwegian / English
Price: NOK 650,-

The fast track version starts with a pre-test which checks the  participant's knowledge of FSE. Depending on the answers you give, you will get a course that is tailored to the level of knowledge that is revealed in the pretest.


The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training in FSE. The course also provides training and instruction in first aid, except for cardiopulmonary resuscitation (CPR).

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about knowledge of regulations and instructions, but it is equally important for the individual to understand why we have these regulations. To succeed in getting the individual to understand the importance of working safely, it is crucial that electrical safety is developing in the right direction and that the number of accidents is reduced.

In order to meet the requirement for being able to provide first aid in the event of electrical accidents, you also need to complete yearly practical training in CPR (mouth-to-mouth and heart compressions).

The course with fast track is suitable for for all, but is particularly practical for those who are going to do refresher training in FSE. The version without fast track is to be found in the course catalogue with the code MTP-052.

Hits per page