Course catalogue

Objective: The purpose of the training is to provide users of work equipment mentioned in § 10-1 and 10-3 in «Regulations on the performance of work» (no. 1357), a good general basic training in the safe use of work equipment, so that accidents and accidents in connection with use is avoided.

The authorities set requirements for basic safety certification of persons who are to drive forklifts, mass transfer machines and cranes. The requirements include both theoretical and practical training. To complete the common theory, one must take and pass a theoretical exam.

Module 1.1 Working environment, responsibilities and consequences are common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, you can start right on module 2.3.

Content:

- Laws and regulations
- Working environment, responsibilities, and consequences
- Environmental
- Safety regulations
- Dangerous goods, marking and handling

The Norwegian authorities require that employees who use lifts (personnel lifts) must be able to document practical and theoretical training in their use. The employer is responsible for ensuring that employees receive the necessary training. (“Regulations regarding the execution of work” no. 1357, section 10-2 Requirements regarding documented safety training in the use of work equipment.) The course provides a basic theoretical and practical introduction to the safe use of lifts (personnel lifts). A certificate of competence is issued to participants in order to fulfil the legislation’s documentation requirements.
Objective: To provide course participants with increased knowledge and awareness of safety measures in order to avoid injuries and accidents at the workplace. 

The following topics are covered:
– Assembly
– Operation
– User qualities
– Areas of use
– Maintenance and control
– Safe use and servicing
– Classes A, B and C
– Accidents
– Legislation and regulations

This course is made for personell envolved in design, planning, projecting, installation and maintenance on electrical installations and equipment offshore. 

The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.

Objective: The purpose of the standard is to minimize the hazards to people and equipment, whilst optimizing dependability.

Content:

- An easy to understand overview and explanation of the committees/regulations/standards and how they are intertwined. 

- Presentation of the regulations and norms: PTIL 5 HMS, Nek 410 (IEC 60092), Nek 420 (IEC 60079), ATEX directives including standards and the Norsok series. 

- The structure and history of the IEC 61892 series, and the scope and application. 

- By using a fictive, illustrated installation, we will focus on the practical elements covered in the following standards: 

o IEC 61892-1 - General requirements and conditions 

o IEC 61892-2 - System Design 

o IEC 61892-3 – Equipment 

o IEC 61892-4 – Cables 

o IEC 61892-6 – Installation 

o IEC 61892-7 – Hazardous areas

This course is only available in Norwegian.

Objective: The aim of the training is that those who are given training are given the opportunity to acquire theoretical and practical knowledge about fall protection and the correct use of rescue equipment, rescue of free-hanging persons, rescue of personnel over open sea, tank, stretcher transport, descent and treatment of personnel after fall accident.

The training is adapted for personnel who are part of fall protection / rescue teams on board an installation, but also for personnel who want a basic understanding of a rescue operation, evacuation equipment after a fall accident when using fall protection / rescue equipment.

The course runs over 3 days (24 hours)

Repetition 2 every year in accordance with NOG 113 and SFS.

Content:

- Introduction
- Regulations, guidelines
- Best practice
- Risk assessment
- Fall protection equipment
- Use of personal protective equipment
- Knowledge of different equipment and methods
- The equipment's limitations and possibilities
- Requirements for maintenance, storage and control
- Consequences of falls

Practical and theoretical review of rescue exercises

- Planning and risk assessment of rescue
- Basic first aid
- Rescue operation w / fresh air equipment
- Rescue of a hanging person
- Rescue from tanks / cramped spaces
- Rescue over open sea
- Descent / hoisting of person
- Stabilization of person
- Knowledge of hanging trauma

Objective: The aim of the training is that theoretical and practical knowledge about fall protection and the correct use of rescue equipment, rescue of free-hanging persons, rescue of personnel over open sea, tank, stretcher transport, descent and treatment of personnel after fall accident is refreshed and repeated.

The training is adapted for personnel who are part of fall protection / rescue teams on board an installation. Participants must gain expertise in risk assessment, rescue (equipment and methods) and first aid.

Covers repetition requirements every 2nd year in accordance with NOG 113 and SFS.

Content:

Introduction
Regulations
Review of accidents and incidents
The rescue service
Equipment
Routines when working at height
Risk assessment
Management, site of injury
Stress and stress management
Hanging trauma, CPR
Rescue drills
Evaluation

Hensikt:

Målsetting med opplæring er at den som gis opplæring tilegner seg tilstrekkelig kunnskap om metoder for å lede og veilede løfteoperasjoner slik at de blir forskriftmessig utført.

Opplæringen gir også kunnskap om farer forbundet med løfteoperasjoner samt bruk av risikokartlegging.

Kurset gir deltakere kunnskap til å kunne utøve overordnet operasjonell ledelse av løfteoperasjoner. Med det menes å kunne planlegge, risikokartlegge og evaluere, samt forebygge ulykker. Videre vil deltaker også tilegne seg kunnskaper om å gjøre rede for materialhåndteringsplan, oppbevaring og bruk av utstyr.

Målsetting med opplæring er at den som gis opplæring tilegner seg tilstrekkelig kunnskap om metoder for å lede og veilede løfteoperasjoner slik at de blir forskriftmessig utført.

Innhold:

• Krav og ansvar til rollen operasjonelt ansvarlig

• Lover, forskrifter, standarder og retningslinjer som gjelder vedr. bruk av løfteutstyr

• Overordnet operasjonell ledelse av løfteoperasjoner

• Helhetlig planlegging av løfteoperasjoner

• Risikokartlegging

• Identifisering av og etablering av barrierer. Gjennomføring og evaluering av en løfteoperasjon

• Informasjonsutveksling

• Krav for oppbevaring av løst løfteutstyr

• Krav for ulike typer løfteutstyr

• Krav til fadder, praksis og sensor

• Avsluttende prøve

Hytorc provide fundamental courses in flange work.
An important aspect of our operation is rooted in courses and training in flange work and bolted connections. We have been involved in the development of courses since OLF started their Gasslekasjeprosjekt (Gas-leakage project) in 2003, up until the updated requirements per NS-EN 1591-4 as of today.

Content:

The industries requirements in regards to training has provided improvements in the form of decrease in amounts of leakages both offshore and onshore. The executive operator gains better understanding and enhanced competence which further results in a safer work environment.

The fundamental course in flange work spans over 4 days, covering both theoretical- and practical training. Examination on both the theoretical and practical work will be conducted. Upon successful completion of the exams, a course certificate will be awarded. This certificate is valid for 5 years. To extend the validation of the certificate, a one-day refresher course must be completed before the expiration date of the certificate (within 5 years).
The refresher course prolongs the validity of the certificate for another 5 years upon completion.

The primary goal of the course is to provide necessary and required training which enables the individual to conduct independent work on flanges and bolted connections.

The course offers the attendees fundamental knowledge, inter alia:

-          Flanges

-          Clamps

-          Bolts and lubrication

-          Gaskets

-          Work Procedures

-          Understanding and safe use of hydraulic tools, torque wrench and equipment

-          Associated documents

The course is set up on request.

Grunnleggende teoretisk og generell sikkerhetsopplæring i trykktesting iht. Forskrift om utførelse av arbeid best. 703.

Kursinnhold

- Trykk og testmedier

- Materiallære

- Bolter og skruer

- Kontroll og vedlikehold

- Gjenger og koblinger

- Sikkerhet

- Høytrykkspumper og boosterpumper

- Slanger

- Valg av testutstyr

- Prosedyrer

- Måleenheter/tabeller

- Arbeidsmiljø

- Avsluttende teoretisk prøve

The course "Hose assembly – safe appliances" provides a basic introduction to the safe use of hoses and selection of fittings for different applications. Furthermore, the course focuses on the identification of fittings, as well as basic practical training in hose assembly.

After the course, participants will be able to use the hose assembly equipment in a way that maintains a safe and appropriate work process. The course is divided into a theoretical and a practical part and is concluded with a written certification test. The course is conducted according to the standard TR 1803 and Oil and Gas United Kingdom Standard.

Objective: Through a combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in enclosed spaces.

The Norwegian Labor Inspection Authority has made major changes to the regulations. People who work in tanks and closed rooms are the biggest difference that the regulation "Work in tanks" has fallen away. This is replaced by section 29 of the regulations «execution of work», which states that all work in closed rooms shall be performed «without danger to life or health». A simple requirement that gives the employer a great deal of responsibility.

New SOLAS requirements: Exercises in closed rooms and rescue, as well as portable gas measuring equipment.

Applies to: All ships covered by SOLAS and all high-speed vessels, mobile offshore drilling units and dynamically positioned vessels

Our courses are in accordance with SOLAS-IMO requirements and the Norwegian Labor Inspection Authority - Execution of work

The definitions of a cramped space vary from country to country, but the usual criteria usually include:

- A room that is predominantly or completely closed
- Contains health and / or safety hazards
- Is not designed for continuous stay of employees
- Has entrances or exits that are small or difficult to access
- A room that is large enough that you can enter it completely and perform the work tasks you have been assigned
- Limited air circulation

Content:

- Review of public laws and regulations
- Know which constituents a safe breathing air contains
- How to make a gas measurement before entering
- Plan entry jobs and rescue operations in closed rooms
- Equipment knowledge
- Exercises in our training tank. We practice entry and use of fall protection equipment, rescue equipment, breathing air equipment and gas meter

Objective: The main goal is to provide personnel who are to perform the roles of signal transmitter, signalers and deck operator with sufficient knowledge of handling and transport of dangerous goods and hazardous waste, to be able to identify hazards and risks when handling this type of cargo, in such a way that unwanted incidents are avoided.

Safe handling and transport of dangerous goods and hazardous waste requires knowledge of hazards and risks, regulations, correct execution and safe practice during treatment and transport.

Content:

The learning process leading up to a certificate of competence is carried out to contribute to safe lifting operations, as well as to document the necessary knowledge and skills in accordance with requirements laid down in national regulations and standards.

After completion, participants must be able to identify hazards, risks, causes and consequences of accidents with dangerous goods and hazardous waste.

Participants will also be familiar with restrictions, requirements, classifications, identification, packaging, marking, documentation and handling of dangerous goods and waste.

Standard NS-EN 1591-4 sets requirements for maintenance of competence. If there has been a stay with work on flanged connections for six months or more, a new refresher course must be completed in order to continue to have valid approval. We offer a separate course for those who do not get enough practice (within 6 months) to maintain the approval. The aim is to provide the participant with sufficient theory and practice to continue to be able to perform flange work in accordance with current requirements. The course includes: Flanges, Clamps, Bolts and lubrication, Gaskets, Working procedures, Understanding safe use of tools and equipment, Associated documents

Basic first aid for the wind industry.

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

- Global Wind Organization (GWO)

 - Labor Inspection (Regulations)

Competence for "First Aid" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Norwegian only

Objective: The purpose of the course is to provide forklift drivers with a good theoretical basic training in the safe use of forklifts, so that accidents in connection with forklift driving are avoided.

Module 1.1 - Basic theoretical module
Module 2.2 -Forklift theory
Module 3.2 - Basic practice forklift.

The course is primarily aimed at future users of forklifts. But anyone who is involved with cargo handling and forklifts in risk analysis and work management can also benefit from the course.

The course is conducted with Norwegian-language teachers and teaching materials in accordance with legislation and regulations, as well as recognized curricula for module-based training.

The forklift driver training consists of four modules:

- Module 1.1 working environment, responsibilities and consequences. *
- Module 2.2 G4 bridge and overhead crane
- Module 3.2 Basic practical training forklift 
- Module 4.2 Practical driving training forklift
- Practical Final test in each forklift type T1-T4

* Module 1.1 is common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, let us know.

Module 4.2 can be completed in a company using a sponsorship arrangement. If you do not have the opportunity to do so, you can participate in one of STQ's practice courses.

Content:

- Safety training, laws, regulations
- Forklift types
- Electric forklift - construction
- Stability
- Daily inspection and maintenance
- Material and goods handling
- HMS
- Proper use of the forklift
- The theory course ends with a theoretical exam

Dette kurset vil gi fremtidige kranførere en god teoretisk grunnopplæring i sikker bruk av offshorekran. Opplæringen gir kandidatene god innsikt i prinsippene for offshorekraners konstruksjon, virkemåte, vedlikehold og bruk slik at uhell og ulykker i forbindelse med løfteoperasjoner unngås. Opplæringen dekker den teoretiske sikkerhetsopplæringen som kreves for G5 offshorekran, samt G20 fastmontert hydraulisk kran. Kurset avsluttes med en skriftlig teoretisk prøve. Når opplært person har bestått teoretisk prøve, samt eksamen for anhukere med tillegg av praktisk kjøreprøve på offshorekran, vil dette være grunnlag for utstedelse av kompetansebevis for fører av G5 offshorekran.

Kursinnhold:

- Innledning med definisjon på offshorekran

- Bruksområder for offshorekraner, fastmonterte hydrauliske kraner

- Ulykker med offshorekraner

- Lover og forskrifter vedr. offshorekraner 

- Krav til kranfører

- Oppbygging, konstruksjon og montering av forskjellige typer offshorekraner

- Fundament / pidestall

- Bomkonstruksjoner

- Elektrisk anlegg

- Hydraulikk / elektronikk

- Mekanikk

- Lastdiagram

- Sikkerhets- / overlastutstyr

- Vinsj / Ståltau / blokk 

- Kontroll og vedlikehold

- Sertifisering / dokumentasjon

- Sikker bruk av offshorekraner

- Øvingsoppgaver og eksamen

This course is only available in Norwegian.

Kurset vil gi kranoperatører en god teoretisk grunnopplæring på bro og traverskraner slik at uhell og ulykker i forbindelse med løfteoparsjoner unngås. Opplæringen gir kandidatene god innsikt i prinsippene for traverskraners konstruksjon,virkemåte, vedlikehold og bruk. Ved bestått teoretisk og praktisk prøve, vil det gi grunnlag for utstedelse av kompetansebevis G4 Bro-og traverskraner.

Kursinnhold
- G11 Stropp og anhuker opplæring (se KOL-001)
- Innledning med krav til kranførerer
- Bruksområder for traverskraner
- Ulykker med bro- og traverskraner
- Oppbygging av forskjellige typer bro- og traverskraner
- Elektrisk anlegg på bro- og traverskraner
- Sikkerhetsbrytere
- Ståltau / blokk
- Sertifisering / dokumentasjon
- Kontroll og vedlikehold, sikkerhetsregler ved bruk

- Øvingsoppgaver 

- Eksamen

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser

Modul 2.3 (16 timer) G11- Løfteredskap 

Modul 2.7 (16 timer) G4- Bro- og Traverskran 

Modul 3.7 - G4 (8 timer) Praktisk bruk

This course is only available in Norwegian.

Objective: The training is intended to provide personnel with good theoretical and practical basic training in the use and maintenance of steel ropes.

The course provides a thorough introduction to knowledge about steel ropes, the correct use / choice of steel ropes and what requirements are set for those who use and control steel ropes.

Regulations on the performance of work, use of work equipment and associated technical requirements (regulations on the performance of work) §10-1. Requirement for documented safety training for work equipment that requires special care during use 

When an employer after a risk assessment finds that the work equipment requires special care during use, only employees who have documented safety training according to §10-2 §10-2 can be used. Requirements for documented safety training when using work equipment

Anyone who is to use work equipment as mentioned in §10-1 and §10-3, must have practical and theoretical training that provides knowledge of construction, operation, use properties and area of use, as well as maintenance and control.

Content:

- Basic theory of steel ropes
- Construction
- Properties
- End parties
- Cast blocks / Wire discs
- The right choice of wire rope
- Proper use of wire ropes
- Proper winding and running in of steel ropes
- Maintenance of steel ropes
- Lubrication of steel ropes
- Damage to steel ropes
- Disposal rules
- Checking of wire ropes in accordance with standard ISO-4309
- Exam

This is a course for electrical installations in potentially explosive areas.

Our goal is to make sure that employees are motivated to work safely and securely.   

Topics:

• General principles for explosion protection

• Area classification and zone division

• Gas groups and the connection between area and equipment

• Temperature classes and the connection between area and equipment

• The general principles for type of protection and labeling

Standards:

• NEK 420

• IEC / NEK EN 60079-10-1

• IEC / NEK EN 60079-14

This course is only available in Norwegian.

Basic Fire Awareness for the wind industry.

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

- Global Wind Organization (GWO)

- Labor Inspection (Regulations)

Competence for "Fire Awareness" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Norwegian only