Course catalogue

COURSE DESCRIPTION

We investigate to take lesson learned, implement preventive measures, and to prevent recurrence of adverse events. Investigating an adverse event is like peeling an onion. We start with the direct causes that are the most visible. To get to the bottom of the events, we must uncover "layer upon layer" to discover the causes behind. Technological development and new organizational structures lead to an increase in complexity, and it becomes more difficult to understand the connection between an incident and the underlying causes of an incident. This course presents method, organisation, and process for conducting investigations. The course can also be offered in combination with a classroom session.

COURSE CONTENTS 

• Description and classification of adverse events

• Organising an investigation

• Handling information and evidence

• The loss-causation model

• The MTO model

• The STEP model

• Reporting and follow-up

HOW WILL THIS COURSE BENEFIT ME, AND MY COMPANY?

After completing the module, participants will understand what inquiry is and to the various stages of the investigation process. Participants will also learn about how the investigation is led and implemented in practice.

For more information and prices, please contact us:

https://trainingportal.com/

Email: learning@proactima.com

Phone: (+47) 4000 1933

Contact Proactima for a tailormade solution for your company.

Induction course in HSE is designed so that participants will have the first necessary expertise to ensure safety challenges in their daily work. This occurs in part through increased awareness of what is valuable and should be prioritized. The course also draws attention to the main framework governing the HSE The course is designed in order to create interest and motivation to work with HSE in the workplace.

Course contents

The course is divided into three topics:

-Care! - To take care of each other

-Terms and conditions - Laws, regulations and rules

-The challenging life - how to work without going wrong

Participants will

-Be motivated to work with safety in the workplace.

-Understand the relationship between a good safety work and preventing loss of important values such as life, health and nature in balance.

-Get an introduction to the main control elements of the HSE 

-Get advice on how they can work safely under time pressure and stress situations

Course provider: Proactima

Who is this course for?

Personnel requiring awareness or understanding of glycol regeneration.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of the process of glycol regeneration

How will this course benefit my company?

By ensuring you have an overview of the process of glycol regeneration.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations.

Who is the course for?

This course aims to provide an overview of the requirements for the safe handling of radioactive materials for personnel who work closely with it.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course provides learners with an awareness of the risks involved in working with radioactive materials.

How will the course benefit my company?

The course will benefit companies by ensuring that personnel understand the risks of working with radioactive materials and how to mitigate these risks.

What standards are referenced in the course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Trainee Oil and Gas Operations Technicians

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of fuel systems

How will this course benefit my company?

By ensuring you have an overview of fuel systems

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

COURSE DESCRIPTION

In a risk assessment,  potential events and consequences are considered. In this course, we focus on unwanted events such as failures and accidents. This could be, for example, a gas leak or afire at an oil platform, that equipment stops working during an operation in a hospital, or that an accident occurs during the execution of a work task. The risk analysis process consists of three phases:

1) Planning

2) Risk assessment

3) Risk management

This course shows how these phases can be planned and implemented in practice. There are many guidelines and standards on how a risk assessmentcan be carried out, and many are adapted to particular industries and professional areas. This course presents a general approach that can be used in most industries.

COURSE CONTENT

•Introduction:What is risk? What is the purpose of a risk assessments?

•Risk assessment and risk management:Description of the steps in a risk assessment, what is important to look out for in the various steps, and how the risk assessment can be applied in risk management.

•Risk analysis methods:There are numerous risk assessment methods that are suitable for looking at different issues. An introduction is given to some of these; Hazid/ course risk analysis, SJA, HAZOP, FMEA and QRA. It’s crucial to choose a method that is well adapted to the problem you are looking at.

STANDARDS REFERRED TO IN THIS COURSE

- ISO 31000:2018 Risk Management

HOW WILL THIS COURSE BENEFIT ME, AND MY COMPANY?

After completing the course, participants should be able to understand what a risk assessment is and have knowledge of the relevant steps. Participants will also have basic knowledge of:

•Different risk analysis methods.

•Choice of risk analysis methods within the three main categories; simplified risk assessment, standard risk assessment and model-based risk assessment.

•Typical pitfalls for planning and carrying out risk assessments.

•Understanding how risk assessments can contribute to decision support.

For more information and prices:

http://www.hseacademy.com

learning@proactima.com

Phone: + 47 4000 1933

Who is this course for?
All well intervention personnel working with tools where explosives are an integrated part of the operation

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to give learners an introduction to explosives used in well intervention operations

How will this course benefit my company?
By ensuring you have an introduction to explosives used in well intervention operations

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Maritime personnel who require an introduction to or awareness of maritime Protection and Indemnity insurance.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course aims to provide personnel with an awareness of the principles of maritime Protection and Indemnity Insurance.

How will this course benefit my company?

By ensuring you have an understanding of the maritime Protection and Indemnity Insurance. 

What standards are referred to in this course?

The Marine Insurance Act.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Personnel requiring an awareness or understanding of the management of hydrocarbon releases.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of managing hydrocarbon releases

How will this course benefit my company?

By ensuring you have an overview of managing hydrocarbon releases

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awarneess or understanding of hydraulic systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to introduce learners to the different types of hydraulic systems.

How will this course benefit my company?

To ensure a minimum company understanding of different types of hydraulic systems found in the Oil and Gas Industry.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Who is this course for?

Personnel requiring an awareness or understanding of asset stability.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with a basic understanding of the principles of asset stability.

This course consists of following sections:

Section One: ‘An Introduction to Asset Stability’

Section Two: ‘Understanding the Curve of Statical Stability (GZ Curve)’

Section Three: ‘Free Surface Effect’

Section Four: ‘Stability Criteria and Regulations’

Section Five: ‘Structural Strength’

How will this course benefit my company?

By ensuring you have a basic understanding of the principles of asset stability.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel who work with or on board Floating Production Storage and Offloading units (FPSOs).

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of industry best practice for FPSO vessel operations.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an overview of industry best practice for FPSO vessel operations.

What standards are referred to in this course?

• International Convention for the Safety of Life at Sea (SOLAS)

• Port State Authority/Flag State

• International Maritime Organization (IMO)

• International Association of Classification Societies (IACS)

• American Bureau of Shipping (ABS)

• China Classification Society (CCS)

• Det Norske Veritas (DNV)

• Germanischer Lloyd (GL)

• Korean Register of Shipping (KR)

• Lloyd’s Register (LR)

• Nippon Kaiji Kyokai (ClassNK) (NK)

• Registro Italiano Navale (RINA)

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Du må ha gjennomført stillaskurs del 1 før dette kurset. 

Dette kurset er bygget på krav i Forskrift om utførelse av arbeid, kapittel 17, som omhandler montering, demontering og endring av stillas.
Forskriften krever opplæring for ulike stillashøyder:
-2-5 meter: 7,5 timer teori og 7,5 timer praksis
-5-9 meter: 15 timer teori og 15 timer praksis
-Over 9 meter: 36 timer teori og 72 timer praksis.

Dette kurset forutsetter at du har gjennomført stillaskurs del1. Til sammen dekker disse kursene kravene til teoretisk opplæring for stillas over til 9 meter, og tilsvarer kravene i Forskrift om utførelse av arbeid § 17-2 -17-4 om teoretisk opplæring.
I tillegg er det krav om 72 timer praktisk opplæring under tilsyn av kvalifisert person, ref Forskrift om utførelse av arbeid § 17-2 - 17-4.

Kursinnhold:
-Innledning
-Risiko ved arbeid i høyden
-Montering, endring og demontering
-Rør og kobling
-Vindkrefter, beregning for vindkrefter og forankring
-Sikkert arbeid i høyden, risikovurdering og fallsikring
-Diverse stillaskonstruksjoner
-Beregninger

Dersom du har gjennomført stillasopplæring (teorikurs) - og kan dokumentere nødvendig praksis i henhold til kravene i forskrift om utførelse av arbeid §§17-2, 17-3 og 17-4 - kan du bestille stillasbevis.

Klikk her for informasjon: https://www.eba.no/stillasbevis/

Requirements for training related to scaffolding are regulated by law and regulations. This course is based on the requirements of Regulations concerning the Performance of Work, Chapter 17, which is about assembly, dismantling and alteration of scaffolding.

-2-5 meters: 7.5 hours theory and  7.5 hours practical training
-5-9 meters: 15 hours theory and 15 hours practical training
-Over 9 meters: 36 hours theory and 72 hours practical training

This course covers the requirements of theoretical training for scaffolding up to 9 meters, and corresponds to the requirements of the Regulations concerning the Performance of Work, Section 17-2 and 17-3, on theoretical training. There is an additional requirement of 15 hours practical training if 5-9 meters. 

Course content:
-What is scaffolding
-Scaffolding and safety
-Risk assessment
-Forces and counter forces
-Structure of a scaffold
-Wind forces
-How to prevent accidents
-Mobile scaffold towers
-Haki scaffolding systems

Dersom du har gjennomført stillasopplæring (teorikurs) - og kan dokumentere nødvendig praksis i henhold til kravene i forskrift om utførelse av arbeid §§17-2, 17-3 og 17-4 - kan du bestille stillasbevis.

Klikk her for informasjon: https://www.eba.no/stillasbevis/

The course covers the following topics:

- Which companies should have a Working Environment Committee (AMU)?
- How to organize the a Working Environment Committee (AMU)?
- What is a Working Environment Committee (AMU)?

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Who is this course for?

Personnel who require a basic understanding of the operation of diesel engines and the importance of maintaining good lubrication for their safe operation.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an overview of how diesel engines operate, their components and their use within the industry. It will also outline the importance of maintaining good lubrication for their safe operation.

How will this course benefit my company?

This course will provide personnel with an overview of how diesel engines operate and the importance of maintaining good lubrication for their safe operation.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Presentation

This training course provides a general introduction to the corrosion process, the protective coating used to prevent corrosion, the coating process and coating inspection.

Objectives

On completion of the training, students will be able to:

Know the different types of corrosion and their causes.

Understand the corrosion phenomenon and the threat it represents to the structural integrity.

Know the protective coating systems used in shipbuilding.

Be familiar with the constituents, structure and curing prerequisites of the protective coating systems.

Understand the different phases of the coating process and the requirements for successful coating application.

Be familiar with coating inspection procedures and the requirements of the IMO PSPC.

Recognise the different forms of coating failure.

Program

Module 1 - Introduction to Corrosion and Protective Coatings

Corrosion definition

Causes of corrosion

Different forms of corrosion

Corrosion rate

Protective coating systems

Paint coating components

Types of coatings

Technical data sheets

Coating cure

Module 2 - Coating Process and Inspection

Coating process scheme

Surface preparation

Cleaning techniques

Surface preparation

Paint application

Coating durability requirements

Coating inspection

Coating system documentation

Coating inspector qualifications

Inspection procedures and plan

Coating defects

Certificate

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Corrosion and Coating awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Corrosion and Coating, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

Who is this course for?

Personnel requiring an awareness or understanding of sealed sources of radiation in the US.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of sealed radiation sources.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US operations involving sealed radiation sources.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for:
Anyone wanting to take the SRC/VHR-exam.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
To use VHF you must have a VHF / SRC certificate. With this course you will learn the whole curriculum in a simple and easily understandable way.

How will this course benefit my company?
By ensuring you have the competence to use VHF.

What standards are referred to in this course?
Lovdata - www.lovdata.no
Petroleum Safety Authority - www.psa.no

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.