Oil and Gas

Course catalogue

Category

Reset

Course type

Course provider

Reset
  • Mintra Trainingportal
hits
16
Course code: MTP-011
Course type: E-learning course
Duration: 150 minutes
Language: English, Norwegian
Price: GBP 100,-

Who is this course for:

All categories of crane operators who have completed a basic slinger course.

Is previous experience required?

Completed basic slinger course.

How will this course benefit me?

All usage, storage, and inspections of lifting equipment shall be in accordance with the producer's instructions and requirements stipulated in the NORSOK R-003 standard. Lifting equipment shall be used only by personnel who have and can document competence in lifting operations.

This course provides a basic review and update of knowledge of lifting equipment in accordance with applicable standards.

How will this course benefit my company?

By ensuring you have required knowledge as a basic slinger to enable you to reduce accidents and incidents.

What standards are referred to in this course?

NORSOK R-003

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-010
Course type: E-learning course
Duration: 60 minutes
Language: English, Norwegian
Price: GBP 100,-

Who is this course for:
All categories of crane operators who have completed a basic rigging course.

Is previous experience required?

Learners must have completed a basic rigging course.

How will this course benefit me?

This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations.

All rigging operations shall be performed according to applicable safety regulations. These specifications are stipulated in the NORSOK R-003 standard and in the Regulations for using work equipment.

Only personnel who have documented rigger training may perform rigging operations. This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations.

How will this course benefit my company?

By ensuring you have the required safety knowledge and theoretical competence as a rigger.

What standards are referred to in this course?
NORSOK R-003

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-063-FT
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 1200,-

Who is this course for?

Everyone working on low and high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

 

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

 

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MGM-033
Course type: E-learning course
Duration: 20 Minutes
Language: English
Price: NOK 500,-

Course Goal: This course aims to provide an understanding of the duties and responsibility of a Ship Safety Officer and should be able to undertake the duties as a Ship’s Safety Officer or Safety Representative.

Who is the course for?

Any personnel taking on the duties of a Ship Safety Officer or Safety Representative including Ship Officers / HQSE Managers / Training Managers, and Engine and Deck Department Supervisors.

Is previous experience required?

Those eligible to perform duties as “Ship Safety Officer” or a “Safety Representative”, are limited to crew members who have no less than 2 years consecutive sea service since attaining the age of 18, which in the case of a safety representative on board a tanker shall include at least 6 months service on such a ship.

How will the course benefit me?

After successfully completing this course, and have the “Safety Officer – Checklist” completed and approved, you should be able to undertake the duties and responsibilities as Safety Officer, as defined in STCW Code 2010 Table A-II/2 and A-III/2. You will be a certified Safety Officer.

How will the course benefit my company?

Ensuring you are qualified and certified as a “Safety Officer”.

What standards are referenced in the course?

• MCA Code of Safe Working Practices for Merchant Seamen

• This Safety Officer course also covers relevant parts of STCW Code Tables A-II/2 and A-III/2 

• IMO Model Course 3.11.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: MTP-064-FT
Course type: E-learning course
Duration: 120 minutes
Language: English, Norwegian
Price: NOK 700,-

Who is this course for?

Everyone working on low voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low voltage installations.

 

What standards are referred to in this course?

§ 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE".

 

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-133
Course type: E-learning course
Duration: 120 minutes
Language: English
Price: NOK 1600,-

Who is the course for?

Personnel who are involved in the preparation of dangerous goods for transportation by sea.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

This course aims to provide learners with industry best practice in relation to the transportation of dangerous goods by sea. The course should enable personnel to recognise the classes of dangerous goods and to pack, mark, label and document articles and items correctly.

How will the course benefit my company?

By ensuring you are familiar with industry best practice in relation to the transportation of dangerous goods by sea.

What standards are referenced in the course?

• International Convention for the Safety of Life at Sea (SOLAS)

• International Maritime Dangerous Goods (IMDG) Code

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Course code: MGM-042
Course type: E-learning course
Duration: 40 minutes
Language: English
Price: NOK 600,-

Who is this course for?
Deck Officers and Deck Crew.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide learners with an introduction to Emergency Towing Systems (ETS) in the Maritime Industry.

How will this course benefit my company?
By ensuring you have an understanding of the Emergency Towing Systems.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: MUK-006
Course type: E-learning course
Duration: 30 minutes
Language: French (Subtitles)
Price: NOK 500,-

Ce cours vise à vous permettre de :

• Définir le terme « manutention manuelle » et expliquer l'importance de la sécurisation des opérations de manutention manuelle 

• Identifier les types de blessures susceptibles de se produire par suite d’opérations de manutention manuelle 

• Identifier la législation mise en place pour réguler les opérations de manutention manuelle

• Décrire les responsabilités attribuées aux employeurs et aux employés par la législation sur les opérations de manutention manuelle

• Expliquer l'importance de l'évaluation des risques liés aux opérations de manutention manuelle 

• Identifier les facteurs à prendre en compte quand on évalue des opérations de manutention manuelle et identifier les manières de réduire les risques de blessure 

• Décrire les bonnes techniques de manutention pour un levage, une poussée et une traction des charges sûrs, et

• Expliquer les exigences en matière de formation associées aux opérations de manutention manuelle

Course code: MTP-080
Course type: E-learning course
Duration: 60 minutes
Language: English
Price: NOK 600,-

Who is the course for?

Personnel who require knowledge or awareness of dangerous goods within HEMS operations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will the course benefit me?

This course is part of the required trainings for HEMS operating crew, and covers classification of dangerous goods, how dangerous goods is divided into hazard classes, how it should be marked and labelled and what emergency procedures should contain.

 

This course must be repeated every 24 months.

 

How will the course benefit my company?

By ensuring you are familiar with the classification of dangerous goods, how dangerous goods is divided into hazard classes, how it should be marked and labelled and what emergency procedures should contain.

 

What standards are referenced in the course?

• International Civil Aviation Organization (ICAO)

• International Air Transport Association (IATA)

Course code: MUK-001
Course type: E-learning course
Duration: 45 minutes
Language: French (Subtitles)
Price: NOK 500,-

Ce cours est destiné à vous présenter les bonnes pratiques de l'industrie concernant le travail avec accès à des espaces confinés.

 

Lorsque ce cours sera terminé, vous devriez pouvoir :

• Expliquer les exigences dictées par les bonnes pratiques de l'industrie relatives au travail impliquant l'accès à des espaces confinés.

Course code: MTP-065-FT
Course type: E-learning course
Duration: 2 hours
Language: English, Norwegian
Price: NOK 700,-

Who is this course for?

Everyone working on high voltage installations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

 

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on high voltage installations.

 

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

 

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MGM-043
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 400,-

Who is this course for?

Maritime personnel who may be affected by potential baggage searches.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

 

How will this course benefit me?

This course aims to provide an introduction to personnel and baggage searches in the Maritime Industry.

 

How will this course benefit my company?

By ensuring you are aware of the personnel and baggage searches which might be carried out. 

 

What standards are referred to in this course?

SOLAS ch. 11 - ISPS code

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: MGM-041
Course type: E-learning course
Duration: 45 minutes
Language: English
Price: NOK 600,-

Who is this course for?

Maritime personnel who require an introduction to or awareness of maritime Protection and Indemnity insurance.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

 

How will this course benefit me?

This course aims to provide personnel with an awareness of the principles of maritime Protection and Indemnity Insurance.

 

How will this course benefit my company?

By ensuring you have an understanding of the maritime Protection and Indemnity Insurance. 

 

What standards are referred to in this course?

The Marine Insurance Act.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: MTP-054
Course type: E-learning course
Duration: 60 minutes
Language: English
Price: NOK 1000,-

Who is this course for:
Anyone wanting to take the SRC/VHR-exam.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
To use VHF you must have a VHF / SRC certificate. With this course you will learn the whole curriculum in a simple and easily understandable way.

How will this course benefit my company?
By ensuring you have the competence to use VHF.

What standards are referred to in this course?
Lovdata - www.lovdata.no
Petroleum Safety Authority - www.psa.no

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-009
Course type: E-learning course
Duration: 2,5 hours
Language: Norwegian
Price: NOK 1200,-

The NORSOK R-003 standard, Safe Use of Lifting Equipment is the industry standard for operating lifting equipment on the Norwegian continental shelf.

The course, “Safe Use of Offshore Cranes”, builds on NORSOK R-003 and is an important means for satisfying governmental regulations for maintaining and verifying competence in the safe use of lifting equipment.

The course focuses ongood work practices, as well as good attitudes and understanding of safety for crane operations, in accordance with the NORSOK R-003 standard.

This course gives an introduction to the new version of R-003 which was launched in 2017.

The course contains references to the 2004 version of R-003, but the course in its entirety will be updated when the new version of R-003 is launched with an updated Appendix B.

 

Course Content:

-Introduction

-Rolls and responsibilities

-Planning and supervising

-Communication

-Supply vessels

-Load bearers

-Chemicals

-Lifting to and from the rig floor

-Using guy wires

-Lifting drilling pipes and casings

-Assembly and disassembly lifts

-Lifting scaffolding material and planks

-Operating blind

-Personnel lifts

Course code: MUK-227
Course type: E-learning course
Duration: 120 minutes
Language: English
Price: NOK 800,-

Who is this course for?
Offshore Marine Technicians

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course provides an introduction to radar systems and their use within the Oil and Gas Industry.

How will this course benefit my company?
By ensuring you are aware of the how phase behaviour and multiphase flow regimes can impact on hydrocarbon delivery.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hits per page