Course catalogue

Course Goal: This course aims to provide an introduction to corrosion in the Oil and Gas Industry

Target Audience: All relevant personnel

Learning Objectives

LO1 Define what is meant by corrosion and explain why it poses a risk to the Oil and Gas Industry

LO2 Identify areas where corrosion is commonly found in oil and gas facilities

LO3 Identify the elements which are necessary for corrosion to occur

LO4 Identify the main corrodents found in oil and gas facilities and explain how these can cause corrosion

LO5 Identify different types of corrosion

LO6 Explain how corrosion can impact wells and flowlines

LO7 Explain how corrosion can impact plant and pipelines

LO8 Explain how corrosion can impact gas systems

LO9 Explain how corrosion can impact water systems

LO10 Explain how corrosion can impact deadleg areas

LO11 Identify areas where external corrosion is most prevalent

LO12 Describe corrosion control measures

LO13 Explain how to play your part in minimising corrosion

Who is this course for?

Trainee Oil and Gas Operations Technicians and Maintenance Personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the Heating, Ventilation and Air Conditioning (HVAC) system

How will this course benefit my company?

By ensuring you have an overview of the Heating, Ventilation and Air Conditioning (HVAC) system

What standards are referred to in this course?

Minimum Efficiency Reporting Value (MERV)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require awareness and understanding of the hazards and controls of common compressed air uses.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

How will this course benefit my company?

By ensuring you are introducted  to safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

For all personnel who are involved in working with gas turbines.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an introduction to gas turbines and how they are designed and operated.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of gas turbines and how they are designed and operated.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of flare systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course provides an overview of flare systems.

How will this course benefit my company?

By ensuring you have an overview of flare systems.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who work with pumps in the Oil & Gas industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an overview of the various types of pumps used in the Oil and Gas Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel who work with pumps have an overview of each type and how they work.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims toprovide learners with an overview of industry best practice associated with pressure vessel inspection

Learning Objectives:

LO1 Define what is meant by a ‘pressure vessel’

LO2 Give examples of pressure vessels

LO3 Identify the factors that can cause pressure vessel incidents

LO4 Identify the hazards posed by pressure vessel failure

LO5 Explain the requirements for inspections to be carried out by a competent person

LO6 Explain the requirements for a written scheme of examination

LO7 Describe how to carry out internal and external pressure vessel inspection

LO8 Describe how to carry out pressure pipework inspection

LO9 Explain the importance of carrying out regular pressure testing

LO10 Describe the control measures that are required to limit the risk posed by pressure vessels

Who is the course for?

Personnel requiring an awareness or understanding of of typical pressure relief systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

This course aims to provide learners with an overview of typical pressure relief systems found in the Oil and Gas Industry.

How will the course benefit my company?

By ensuring you are introduced to the role of of typical pressure relief systems in operations.

What standards are referenced in the course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Trainee Oil and Gas Operations Technicians

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of fuel systems

How will this course benefit my company?

By ensuring you have an overview of fuel systems

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel requiring an awareness or understanding of lubrication systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

This course aims to introduce learners to the role of lubrication systems in maintaining mechanical equipment.

How will the course benefit my company?

By ensuring you are introduced to the role of lubrication systems in maintaining mechanical equipment.

What standards are referenced in the course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring awareness or understanding of subsea control systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of subsea control systems and has the following sections:

Section 1: Evolution of Subsea Technology

Section 2: Subsea Completions Layout

Section 3: Subsea Control Systems

Section 4: Subsea Process Control

Section 5: Subsea Technology Development

How will this course benefit my company?

By ensuring you have an overview of industry best practice in relation to Subsea Control Systems.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.