Oil and Gas

Course catalogue

hits
11
Course code: MTP-010
Course type: E-learning course
Duration: 1 hour
Language: Norwegian
Price: NOK 1150,-

This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations.

All rigging operations shall be performed according to applicable safety regulations. These specifications are stipulated in the NORSOK R-003 standard and in the Regulations for using work equipment.

Only personnel who have documented rigger training may perform rigging operations. This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations.

 

Course Content

-Introduction
-Rigging operations in general
-Fastening
-Handling loads
-Using beam clips
-Clamps and travelling clamps

Course code: MTP-011
Course type: E-learning course
Duration: 2,5 hours
Language: Norwegian
Price: NOK 1150,-

All usage, storage, and inspections of lifting equipment shall be in accordance with the producer’s instructions and requirements stipulated in the NORSOK R-003 standard.  Lifting equipment shall be used only by personnel who have and can document competence in lifting operations.

 

This course provides a basic review and update of knowledge of lifting equipment in accordance with applicable standards.

The course requires completed modules 0-1.1 in the basic slinger course, fall safety, and simple lifting equipment modules 0-2.2.  In addition, practical experience slinging loads is required.

 

Course Content

-General information about lifting and lifting equipment
-Information about marking and tagging, material properties, correct usage and scrapping criteria for the following lifting equipment: fibre straps and big bags, chain slings, steel straps, shackles, eyebolts and eye nuts, lifting caps and turnbuckles, load bearers
-Using lifting equipment, fall safety and specific lifting equipment.

Course code: MTP-009
Course type: E-learning course
Duration: 2,5 hours
Language: Norwegian
Price: NOK 1150,-

The NORSOK R-003 standard, Safe Use of Lifting Equipment is the industry standard for operating lifting equipment on the Norwegian continental shelf.


The course, “Safe Use of Offshore Cranes”, builds on NORSOK R-003 and is an important means for satisfying governmental regulations for maintaining and verifying competence in the safe use of lifting equipment.


The course focuses ongood work practices, as well as good attitudes and understanding of safety for crane operations, in accordance with the NORSOK R-003 standard.


Course Content:
-Introduction
-Rolls and responsibilities
-Planning and supervising
-Communication
-Supply vessels
-Load bearers
-Chemicals
-Lifting to and from the rig floor
-Using guy wires
-Lifting drilling pipes and casings
-Assembly and disassembly lifts
-Lifting scaffolding material and planks
-Operating blind
-Personnel lifts

Course code: MTP-010
Course type: E-learning course
Duration: 1 hour
Language: English
Price: NOK 1150,-

This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations.

All rigging operations shall be performed according to applicable safety regulations. These specifications are stipulated in the NORSOK R-003 standard and in the Regulations for using work equipment.

Only personnel who have documented rigger training may perform rigging operations. This course provides a basic review and update of knowledge of rigging operations in accordance with applicable standards and regulations.


Course Content 
-Introduction
-Rigging operations in general
-Fastening
-Handling loads
-Using beam clips
-Clamps and travelling clamps

Course code: MTP-011
Course type: E-learning course
Duration: 2,5 hours
Language: English
Price: NOK 1150,-

All usage, storage, and inspections of lifting equipment shall be in accordance with the producer’s instructions and requirements stipulated in the NORSOK R-003 standard.  Lifting equipment shall be used only by personnel who have and can document competence in lifting operations.

 

This course provides a basic review and update of knowledge of lifting equipment in accordance with applicable standards.

The course requires completed modules 0-1.1 in the basic slinger course, fall safety, and simple lifting equipment modules 0-2.2.  In addition, practical experience slinging loads is required.

 

Course Content

-General information about lifting and lifting equipment 
-Information about marking and tagging, material properties, correct usage and scrapping criteria for the following lifting equipment: fibre straps and big bags, chain slings, steel straps, shackles, eyebolts and eye nuts, lifting caps and turnbuckles, load bearers 
-Using lifting equipment, fall safety and specific lifting equipment.

Course code: MUK-012
Course type: E-learning course
Duration: 30 minutes
Language: English
Price: NOK 500,-

This course provides learners with an awareness of the Lifting Operations and Lifting Equipment Regulations (LOLER) and gives an overview of industry best practice in relation to working with lifting equipment.

 

Course Content

-Explain what LOLER is and to whom it applies
-Identify the general requirements of LOLER
-Identify the types of equipment and accessories that LOLER covers and its relationship to PUWER
-Outline the main hazards involved in lifting operations including positioning and installation
-Explain the organising, planning and risk assessment requirements for lifting operations, including the need for Lifting Plans
-Describe the LOLER requirements associated with the lifting of persons or ‘man-riding’
-Explain the LOLER requirements for the marking of equipment with their Safe Working Loads (SWL)
-Describe the common roles involved in lifting operations
-Explain the examination, inspection and maintenance requirements and the role of the competent person
-Describe the record-keeping and defect reporting requirements under LOLER

Course code: MTP-009
Course type: E-learning course
Duration: 2,5 hours
Language: English
Price: NOK 1150,-

The NORSOK R-003 standard, Safe Use of Lifting Equipment is the industry standard for operating lifting equipment on the Norwegian continental shelf.


The course, “Safe Use of Offshore Cranes”, builds on NORSOK R-003 and is an important means for satisfying governmental regulations for maintaining and verifying competence in the safe use of lifting equipment.


The course focuses ongood work practices, as well as good attitudes and understanding of safety for crane operations, in accordance with the NORSOK R-003 standard.


Course Content:
-Introduction
-Rolls and responsibilities
-Planning and supervising
-Communication
-Supply vessels
-Load bearers
-Chemicals
-Lifting to and from the rig floor
-Using guy wires
-Lifting drilling pipes and casings
-Assembly and disassembly lifts
-Lifting scaffolding material and planks
-Operating blind
-Personnel lifts

Course code: LSI-002
Course type: E-learning course
Duration: 4 hours 30 minutes
Language: Norwegian
Price: NOK 1190,-

This course covers the theoretical part of the documented safety training required for slingers and signallers. The course is also suitable as a refresher for crane operators and other personnel who have previously completed training in lifting appliances and lifting gear. The course content deals with selection, control and safe use of the most common lifting gear used in construction, industry, shipping and offshore. Signalling, communication and controlling the load are key topics of the course.

In addition, the course requires that practical training is conducted on applicable work equipment.

The course contains 9 modules:

• Lifting equipment, expressions and acronyms
• Slinging, center of gravity, working angles and lifting tables
• Fibre slings
• Lifting gears of chain
• Wire rope slings
• Shackles
• Eye bolts, nuts and lifting lugs
• Signals and signs, and control of load
• Safety regulations for lifting operations

Course code: MUK-154
Course type: E-learning course
Duration: 2 hours 30 minutes
Language: English
Price: NOK 1500,-

Course Goal: To provide learners with an awareness of industry best practice for working with cranes

 

Target Audience: All relevant personnel

 

This course contains the following sections:

Section 1: Introduction to Crane Operations

Section 2: Cranes and Lifting Equipment

Section 3: Planning a Lift

Section 4: Carrying out a Lift

Course code: MUK-126
Course type: E-learning course
Duration: 15 minutes
Language: English
Price: NOK 500,-

Course Goal: This course aims to give an overview of the safe use of lifting appliances and equipment

 

Target Audience: All relevant personnel

 

Learning Objectives:

 

LO1: Identify lifting equipment commonly used in the Oil and Gas Industry

LO2: Define what is meant by Safe Working Loads (SWLs) and colour coding

LO3: Give examples of hazards that can be posed by lifting operations

LO4: Describe the process for carrying out pre-use inspections on equipment to ensure safe lifting operations

LO5: Identify the safety precautions that should be taken to mitigate any risk when using lifting equipment

Course code: LSI-004
Course type: E-learning course
Duration: 7 hour
Language: Norwegian
Price: NOK 1490,-
Hits per page